Welding Machine Portable Welder Machine 110V Welder Machine Kit Description The handheld welding machine is made of high-quality plastic, which is strong and durable. It adopts an IGBT inverter technology to achieve excellent welding effects and can adjust the output current (20-120A) by turning the top compass to allow for convenient use. It’s your ideal choice! Key Features Strong and Durable: This product is made of high-quality plastic, which is wear-resistant, corrosion-resistant, heat-resistant, strong, durable, and not easy to deform. Efficient&Energy-saving: It has a maximum power of 4600W to achieve fast welding, saving you lots of time. In addition, it has a high efficiency of about 85%, saving you lots of electricity. IGBT Inverter Technology: The unique contro. Electric Welder Hand Held Welding Machine Set 110V/4600W IGBT Inverter Arc-120? Welding Machine Portable Welder Machine 110V Welder Machine Kit. The handheld welding machine is made of high-quality plastic, which is strong and durable. This product is made of high-quality plastic, which is. Strong, durable, and not easy to deform. It has a maximum power of 4600W to achieve fast welding, saving you lots of time. The unique control method of IGBT inverter technology ensures a stable arc and easy arc starting with less spatter, stable current, and stick. Which guarantees beautiful and flat welding points. The high enclosure protection grade (IP21), high insulation class (F), overload protection, and overheat protection can enhance the safety of use. Meanwhile, a set of protective masks in the package can prevent sparks from splashing on the face during the welding process. It uses an imported chip to automatically identify and match welding rods. All you need to do is turn the compass on the top to adjust the 6-step current (20A/40A/60A/80A/100A/120A) for a variety of welding mode applications, which is newbie-friendly. The built-in cooling fan and heat dissipation holes on the side of the product can dissipate heat in time and prolong the service life of this product. You only need to open the switch on the base and press the start button to start the product. Meanwhile, the rod switch allows you to put the welding rod into the machine and can fix it. It only weighs 2kg/4.41lbs, so it’s lightweight, portable, and convenient for you to operate with a single hand. We are committed to providing quality products and services. We will reply as soon as possible and solve the problem for you. It has dense steel bristles, helping you to polish the welding points to be smooth and beautiful. You can put small accessories into the toolbox to avoid losing them. It is also equipped with a portable carry handle for carrying to work outside. It is made of brass and is robust to help you hold the workpiece to be welded during the welding job. It can be widely used in machinery manufacturing, sheet metal processing, automobile maintenance, guardrail, iron processing, hardware, and other fields for welding iron rods within a diameter of 2.5mm/0.09inch. Rated Output Voltage: 24.8V. Output Current: 20-120A (1-Step=20A / 2-Step=40A / 3-Step=60A /4-Step=80A /5-Step=100A / 6-Step=120A). Rated Input Power: 4.6KW. Enclosure Protection Grade: IP21. Electrode: f1.6-f3.2. Power Factor: 0.76. Duty Cycle at 40? Net Weight: 2kg/4.41lbs. Gross Weight: 2.4kg/5.29lbs. Toolbox Size: 372512cm/14.69.94.7inch. Suitable Welding Rod Diameter: 2.5mm/0.09inch. 1 Hand-held Welding Machine. 1 Set Protective Masks. Please make sure the heat dissipation holes are uncovered and unblocked. Good ventilation is of critical importance to the normal performance and service life of the machine. Please keep hands, hair, and tools away from the cooling fan to avoid personal injury or machine damage. The minimum distance between the machine and nearby objects should be 30cm/11inch. Clean the dust periodically with dry and clean compressed air. If welding in an environment with heavy smoke and pollution, the machine should be cleaned daily. The pressure of compressed air should be at a proper lever lest the small parts inside the machine will be damaged. Please avoid rain, water, or vapor infilter the machine. If there is, dry it and check the insulation with a megger (including that between the connections and that between the connection and the case). Only when there are no abnormal phenomena can welding be continued. Check periodically whether the inner circuit connection is ok esp. Tighten the loose connection. If there is oxidization, remove it with sandpaper and then reconnect. Check periodically whether the insulation skin of all cables is in a good station. If there is any dilapidation, wrap it or replace it. Put the machine into the toolbox in a dry location if it is not to be used for a long time. Please read the manual completely before installation and use, and pay particular attention to the safety instructions included. Please allow the slight color difference caused by the shooting light and 1-3cm error due to manual measurement, and make sure you do not mind before ordering. Feedback is very important to us. It is impossible to address issues if we do not know about them! Faction is our ultimate goal. We work hard to earn your trust and future business. A If you receive a defective item, you may return it or ask for a discount. Due to time zones, our reply to your questions may not be immediately. If it’s non-workdays, please kindly be patient and wait till Monday.

Welding Machine Portable Welder Machine 110V Welder Machine Kit Description The handheld welding machine is made of high-quality plastic, which is strong and durable. It adopts an IGBT inverter technology to achieve excellent welding effects and can adjust the output current (20-120A) by turning the top compass to allow for convenient use. It’s your ideal choice! Key Features Strong and Durable: This product is made of high-quality plastic, which is wear-resistant, corrosion-resistant, heat-resistant, strong, durable, and not easy to deform. Efficient&Energy-saving: It has a maximum power of 4600W to achieve fast welding, saving you lots of time. In addition, it has a high efficiency of about 85%, saving you lots of electricity. IGBT Inverter Technology: The unique contro. Electric Welder Hand Held Welding Machine Kit 110V 4600W IGBT Inverter Arc-120. Welding Machine Portable Welder Machine 110V Welder Machine Kit. The handheld welding machine is made of high-quality plastic, which is strong and durable. This product is made of high-quality plastic, which is. Strong, durable, and not easy to deform. It has a maximum power of 4600W to achieve fast welding, saving you lots of time. The unique control method of IGBT inverter technology ensures a stable arc and easy arc starting with less spatter, stable current, and stick. Which guarantees beautiful and flat welding points. The high enclosure protection grade (IP21), high insulation class (F), overload protection, and overheat protection can enhance the safety of use. Meanwhile, a set of protective masks in the package can prevent sparks from splashing on the face during the welding process. It uses an imported chip to automatically identify and match welding rods. All you need to do is turn the compass on the top to adjust the 6-step current (20A/40A/60A/80A/100A/120A) for a variety of welding mode applications, which is newbie-friendly. The built-in cooling fan and heat dissipation holes on the side of the product can dissipate heat in time and prolong the service life of this product. You only need to open the switch on the base and press the start button to start the product. Meanwhile, the rod switch allows you to put the welding rod into the machine and can fix it. It only weighs 2kg/4.41lbs, so it’s lightweight, portable, and convenient for you to operate with a single hand. We are committed to providing quality products and services. We will reply as soon as possible and solve the problem for you. It has dense steel bristles, helping you to polish the welding points to be smooth and beautiful. You can put small accessories into the toolbox to avoid losing them. It is also equipped with a portable carry handle for carrying to work outside. It is made of brass and is robust to help you hold the workpiece to be welded during the welding job. It can be widely used in machinery manufacturing, sheet metal processing, automobile maintenance, guardrail, iron processing, hardware, and other fields for welding iron rods within a diameter of 2.5mm/0.09inch. Rated Output Voltage: 24.8V. Output Current: 20-120A (1-Step=20A / 2-Step=40A / 3-Step=60A /4-Step=80A /5-Step=100A / 6-Step=120A). Rated Input Power: 4.6KW. Enclosure Protection Grade: IP21. Electrode: f1.6-f3.2. Power Factor: 0.76. Duty Cycle at 40? Net Weight: 2kg/4.41lbs. Gross Weight: 2.4kg/5.29lbs. Toolbox Size: 372512cm/14.69.94.7inch. Suitable Welding Rod Diameter: 2.5mm/0.09inch. 1 Hand-held Welding Machine. 1 Set Protective Masks. Please make sure the heat dissipation holes are uncovered and unblocked. Good ventilation is of critical importance to the normal performance and service life of the machine. Please keep hands, hair, and tools away from the cooling fan to avoid personal injury or machine damage. The minimum distance between the machine and nearby objects should be 30cm/11inch. Clean the dust periodically with dry and clean compressed air. If welding in an environment with heavy smoke and pollution, the machine should be cleaned daily. The pressure of compressed air should be at a proper lever lest the small parts inside the machine will be damaged. Please avoid rain, water, or vapor infilter the machine. If there is, dry it and check the insulation with a megger (including that between the connections and that between the connection and the case). Only when there are no abnormal phenomena can welding be continued. Check periodically whether the inner circuit connection is ok esp. Tighten the loose connection. If there is oxidization, remove it with sandpaper and then reconnect. Check periodically whether the insulation skin of all cables is in a good station. If there is any dilapidation, wrap it or replace it. Put the machine into the toolbox in a dry location if it is not to be used for a long time. Please read the manual completely before installation and use, and pay particular attention to the safety instructions included. Please allow the slight color difference caused by the shooting light and 1-3cm error due to manual measurement, and make sure you do not mind before ordering. Feedback is very important to us. It is impossible to address issues if we do not know about them! Faction is our ultimate goal. We work hard to earn your trust and future business. A If you receive a defective item, you may return it or ask for a discount. Due to time zones, our reply to your questions may not be immediately. If it’s non-workdays, please kindly be patient and wait till Monday.

1pc Handheld Welding Machine, Portable ARC Welder Gun 110V Handheld Stick ARC Welder IGBT Inverter For 3/32″-1/8″ Wire Rod With Electric Welder Machine Kit.

Welding Machine Portable Welder Machine 110V Welder Machine Kit Description The handheld welding machine is made of high-quality plastic, which is strong and durable. It adopts an IGBT inverter technology to achieve excellent welding effects and can adjust the output current (20-120A) by turning the top compass to allow for convenient use. It’s your ideal choice! Key Features Strong and Durable: This product is made of high-quality plastic, which is wear-resistant, corrosion-resistant, heat-resistant, strong, durable, and not easy to deform. Efficient&Energy-saving: It has a maximum power of 4600W to achieve fast welding, saving you lots of time. In addition, it has a high efficiency of about 85%, saving you lots of electricity. IGBT Inverter Technology: The unique contro. Electric Welder Hand Held Welding Machine Kit 110V/4600W IGBT Inverter Arc-120. Welding Machine Portable Welder Machine 110V Welder Machine Kit. The handheld welding machine is made of high-quality plastic, which is strong and durable. This product is made of high-quality plastic, which is. Strong, durable, and not easy to deform. It has a maximum power of 4600W to achieve fast welding, saving you lots of time. The unique control method of IGBT inverter technology ensures a stable arc and easy arc starting with less spatter, stable current, and stick. Which guarantees beautiful and flat welding points. The high enclosure protection grade (IP21), high insulation class (F), overload protection, and overheat protection can enhance the safety of use. Meanwhile, a set of protective masks in the package can prevent sparks from splashing on the face during the welding process. It uses an imported chip to automatically identify and match welding rods. All you need to do is turn the compass on the top to adjust the 6-step current (20A/40A/60A/80A/100A/120A) for a variety of welding mode applications, which is newbie-friendly. The built-in cooling fan and heat dissipation holes on the side of the product can dissipate heat in time and prolong the service life of this product. You only need to open the switch on the base and press the start button to start the product. Meanwhile, the rod switch allows you to put the welding rod into the machine and can fix it. It only weighs 2kg/4.41lbs, so it’s lightweight, portable, and convenient for you to operate with a single hand. We are committed to providing quality products and services. We will reply as soon as possible and solve the problem for you. It has dense steel bristles, helping you to polish the welding points to be smooth and beautiful. You can put small accessories into the toolbox to avoid losing them. It is also equipped with a portable carry handle for carrying to work outside. It is made of brass and is robust to help you hold the workpiece to be welded during the welding job. It can be widely used in machinery manufacturing, sheet metal processing, automobile maintenance, guardrail, iron processing, hardware, and other fields for welding iron rods within a diameter of 2.5mm/0.09inch. Rated Output Voltage: 24.8V. Output Current: 20-120A (1-Step=20A / 2-Step=40A / 3-Step=60A /4-Step=80A /5-Step=100A / 6-Step=120A). Rated Input Power: 4.6KW. Enclosure Protection Grade: IP21. Electrode: f1.6-f3.2. Power Factor: 0.76. Duty Cycle at 40? Net Weight: 2kg/4.41lbs. Gross Weight: 2.4kg/5.29lbs. Toolbox Size: 372512cm/14.69.94.7inch. Suitable Welding Rod Diameter: 2.5mm/0.09inch. 1 Hand-held Welding Machine. 1 Set Protective Masks. Please make sure the heat dissipation holes are uncovered and unblocked. Good ventilation is of critical importance to the normal performance and service life of the machine. Please keep hands, hair, and tools away from the cooling fan to avoid personal injury or machine damage. The minimum distance between the machine and nearby objects should be 30cm/11inch. Clean the dust periodically with dry and clean compressed air. If welding in an environment with heavy smoke and pollution, the machine should be cleaned daily. The pressure of compressed air should be at a proper lever lest the small parts inside the machine will be damaged. Please avoid rain, water, or vapor infilter the machine. If there is, dry it and check the insulation with a megger (including that between the connections and that between the connection and the case). Only when there are no abnormal phenomena can welding be continued. Check periodically whether the inner circuit connection is ok esp. Tighten the loose connection. If there is oxidization, remove it with sandpaper and then reconnect. Check periodically whether the insulation skin of all cables is in a good station. If there is any dilapidation, wrap it or replace it. Put the machine into the toolbox in a dry location if it is not to be used for a long time. Please read the manual completely before installation and use, and pay particular attention to the safety instructions included. Please allow the slight color difference caused by the shooting light and 1-3cm error due to manual measurement, and make sure you do not mind before ordering. Feedback is very important to us. It is impossible to address issues if we do not know about them! Faction is our ultimate goal. We work hard to earn your trust and future business. A If you receive a defective item, you may return it or ask for a discount. Due to time zones, our reply to your questions may not be immediately. If it’s non-workdays, please kindly be patient and wait till Monday. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Welding & Soldering Equipment\Welding Equipment & Accessories\Welders, Cutters & Torches\TIG Welders”. The seller is “wumingzhou” and is located in this country: US. This item can be shipped to United States.

• Brand: Unbranded
• Model: ARC-120
• Color: Black
• Material: Plastic
• Style: Modern
• Plug Voltage: 110V
• Rated Output Voltage: 24.8V
• Output Curren: 20-120A ((1-Step=20A / 2-Step=40A / 3-Step=60A /4-Step=80A
• Rated Input Power: 4.6KW
• Enclosure Protection Grade: IP21
• Electrode: φ1.6-φ3.2
• Power Factor: 0.76
• Insulation Class: F
• Duty Cycle: at 40℃/104℉: 20%
• Working Temperature: -10~40℃/-50~104℉
• Efficiency: About 85%
• Power Type: Plug-in
• Plug: American Standard
• Net Weight: 2kg/4.41lbs
• Suitable Welding Rod Diameter: 2.5mm/0.09inch

Welding Machine Portable Welder Machine 110V Welder Machine Kit Description The handheld welding machine is made of high-quality plastic, which is strong and durable. It adopts an IGBT inverter technology to achieve excellent welding effects and can adjust the output current (20-120A) by turning the top compass to allow for convenient use. It’s your ideal choice! Key Features Strong and Durable: This product is made of high-quality plastic, which is wear-resistant, corrosion-resistant, heat-resistant, strong, durable, and not easy to deform. Efficient&Energy-saving: It has a maximum power of 4600W to achieve fast welding, saving you lots of time. In addition, it has a high efficiency of about 85%, saving you lots of electricity. IGBT Inverter Technology: The unique contro. Electric Welder Hand Held Welding Machine Kit 110V 4600W IGBT Inverter Arc-120. Welding Machine Portable Welder Machine 110V Welder Machine Kit. The handheld welding machine is made of high-quality plastic, which is strong and durable. This product is made of high-quality plastic, which is. Strong, durable, and not easy to deform. It has a maximum power of 4600W to achieve fast welding, saving you lots of time. The unique control method of IGBT inverter technology ensures a stable arc and easy arc starting with less spatter, stable current, and stick. Which guarantees beautiful and flat welding points. The high enclosure protection grade (IP21), high insulation class (F), overload protection, and overheat protection can enhance the safety of use. Meanwhile, a set of protective masks in the package can prevent sparks from splashing on the face during the welding process. It uses an imported chip to automatically identify and match welding rods. All you need to do is turn the compass on the top to adjust the 6-step current (20A/40A/60A/80A/100A/120A) for a variety of welding mode applications, which is newbie-friendly. The built-in cooling fan and heat dissipation holes on the side of the product can dissipate heat in time and prolong the service life of this product. You only need to open the switch on the base and press the start button to start the product. Meanwhile, the rod switch allows you to put the welding rod into the machine and can fix it. It only weighs 2kg/4.41lbs, so it’s lightweight, portable, and convenient for you to operate with a single hand. We are committed to providing quality products and services. We will reply as soon as possible and solve the problem for you. It has dense steel bristles, helping you to polish the welding points to be smooth and beautiful. You can put small accessories into the toolbox to avoid losing them. It is also equipped with a portable carry handle for carrying to work outside. It is made of brass and is robust to help you hold the workpiece to be welded during the welding job. It can be widely used in machinery manufacturing, sheet metal processing, automobile maintenance, guardrail, iron processing, hardware, and other fields for welding iron rods within a diameter of 2.5mm/0.09inch. Rated Output Voltage: 24.8V. Output Current: 20-120A (1-Step=20A / 2-Step=40A / 3-Step=60A /4-Step=80A /5-Step=100A / 6-Step=120A). Rated Input Power: 4.6KW. Enclosure Protection Grade: IP21. Electrode: f1.6-f3.2. Power Factor: 0.76. Duty Cycle at 40? Net Weight: 2kg/4.41lbs. Gross Weight: 2.4kg/5.29lbs. Toolbox Size: 372512cm/14.69.94.7inch. Suitable Welding Rod Diameter: 2.5mm/0.09inch. 1 Hand-held Welding Machine. 1 Set Protective Masks. Please make sure the heat dissipation holes are uncovered and unblocked. Good ventilation is of critical importance to the normal performance and service life of the machine. Please keep hands, hair, and tools away from the cooling fan to avoid personal injury or machine damage. The minimum distance between the machine and nearby objects should be 30cm/11inch. Clean the dust periodically with dry and clean compressed air. If welding in an environment with heavy smoke and pollution, the machine should be cleaned daily. The pressure of compressed air should be at a proper lever lest the small parts inside the machine will be damaged. Please avoid rain, water, or vapor infilter the machine. If there is, dry it and check the insulation with a megger (including that between the connections and that between the connection and the case). Only when there are no abnormal phenomena can welding be continued. Check periodically whether the inner circuit connection is ok esp. Tighten the loose connection. If there is oxidization, remove it with sandpaper and then reconnect. Check periodically whether the insulation skin of all cables is in a good station. If there is any dilapidation, wrap it or replace it. Put the machine into the toolbox in a dry location if it is not to be used for a long time. Please read the manual completely before installation and use, and pay particular attention to the safety instructions included. Please allow the slight color difference caused by the shooting light and 1-3cm error due to manual measurement, and make sure you do not mind before ordering. Feedback is very important to us. It is impossible to address issues if we do not know about them! Faction is our ultimate goal. We work hard to earn your trust and future business. A If you receive a defective item, you may return it or ask for a discount. Due to time zones, our reply to your questions may not be immediately. If it’s non-workdays, please kindly be patient and wait till Monday. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Welding & Soldering Equipment\Welding Equipment & Accessories\Welders, Cutters & Torches\TIG Welders”. The seller is “prtunyts” and is located in this country: US. This item can be shipped to United States.

• Brand: Unbranded
• Model: ARC-120
• Color: Black
• Material: Plastic
• Style: Modern
• Plug Voltage: 110V
• Rated Output Voltage: 24.8V
• Output Curren: 20-120A ((1-Step=20A / 2-Step=40A / 3-Step=60A /4-Step=80A
• Rated Input Power: 4.6KW
• Enclosure Protection Grade: IP21
• Electrode: φ1.6-φ3.2
• Power Factor: 0.76
• Insulation Class: F
• Duty Cycle: at 40℃/104℉: 20%
• Working Temperature: -10~40℃/-50~104℉
• Efficiency: About 85%
• Power Type: Plug-in
• Plug: American Standard
• Net Weight: 2kg/4.41lbs
• Suitable Welding Rod Diameter: 2.5mm/0.09inch

Welding Machine Portable Welder Machine 110V Welder Machine Kit Description The handheld welding machine is made of high-quality plastic, which is strong and durable. It adopts an IGBT inverter technology to achieve excellent welding effects and can adjust the output current (20-120A) by turning the top compass to allow for convenient use. It’s your ideal choice! Key Features Strong and Durable: This product is made of high-quality plastic, which is wear-resistant, corrosion-resistant, heat-resistant, strong, durable, and not easy to deform. Efficient&Energy-saving: It has a maximum power of 4600W to achieve fast welding, saving you lots of time. In addition, it has a high efficiency of about 85%, saving you lots of electricity. IGBT Inverter Technology: The unique contro. Electric Welder Hand Held Welding Machine Kit 110V 4600W IGBT Inverter Arc-120. Welding Machine Portable Welder Machine 110V Welder Machine Kit. The handheld welding machine is made of high-quality plastic, which is strong and durable. This product is made of high-quality plastic, which is. Strong, durable, and not easy to deform. It has a maximum power of 4600W to achieve fast welding, saving you lots of time. The unique control method of IGBT inverter technology ensures a stable arc and easy arc starting with less spatter, stable current, and stick. Which guarantees beautiful and flat welding points. The high enclosure protection grade (IP21), high insulation class (F), overload protection, and overheat protection can enhance the safety of use. Meanwhile, a set of protective masks in the package can prevent sparks from splashing on the face during the welding process. It uses an imported chip to automatically identify and match welding rods. All you need to do is turn the compass on the top to adjust the 6-step current (20A/40A/60A/80A/100A/120A) for a variety of welding mode applications, which is newbie-friendly. The built-in cooling fan and heat dissipation holes on the side of the product can dissipate heat in time and prolong the service life of this product. You only need to open the switch on the base and press the start button to start the product. Meanwhile, the rod switch allows you to put the welding rod into the machine and can fix it. It only weighs 2kg/4.41lbs, so it’s lightweight, portable, and convenient for you to operate with a single hand. We are committed to providing quality products and services. We will reply as soon as possible and solve the problem for you. It has dense steel bristles, helping you to polish the welding points to be smooth and beautiful. You can put small accessories into the toolbox to avoid losing them. It is also equipped with a portable carry handle for carrying to work outside. It is made of brass and is robust to help you hold the workpiece to be welded during the welding job. It can be widely used in machinery manufacturing, sheet metal processing, automobile maintenance, guardrail, iron processing, hardware, and other fields for welding iron rods within a diameter of 2.5mm/0.09inch. Rated Output Voltage: 24.8V. Output Current: 20-120A (1-Step=20A / 2-Step=40A / 3-Step=60A /4-Step=80A /5-Step=100A / 6-Step=120A). Rated Input Power: 4.6KW. Enclosure Protection Grade: IP21. Electrode: f1.6-f3.2. Power Factor: 0.76. Duty Cycle at 40? Net Weight: 2kg/4.41lbs. Gross Weight: 2.4kg/5.29lbs. Toolbox Size: 372512cm/14.69.94.7inch. Suitable Welding Rod Diameter: 2.5mm/0.09inch. 1 Hand-held Welding Machine. 1 Set Protective Masks. Please make sure the heat dissipation holes are uncovered and unblocked. Good ventilation is of critical importance to the normal performance and service life of the machine. Please keep hands, hair, and tools away from the cooling fan to avoid personal injury or machine damage. The minimum distance between the machine and nearby objects should be 30cm/11inch. Clean the dust periodically with dry and clean compressed air. If welding in an environment with heavy smoke and pollution, the machine should be cleaned daily. The pressure of compressed air should be at a proper lever lest the small parts inside the machine will be damaged. Please avoid rain, water, or vapor infilter the machine. If there is, dry it and check the insulation with a megger (including that between the connections and that between the connection and the case). Only when there are no abnormal phenomena can welding be continued. Check periodically whether the inner circuit connection is ok esp. Tighten the loose connection. If there is oxidization, remove it with sandpaper and then reconnect. Check periodically whether the insulation skin of all cables is in a good station. If there is any dilapidation, wrap it or replace it. Put the machine into the toolbox in a dry location if it is not to be used for a long time. Please read the manual completely before installation and use, and pay particular attention to the safety instructions included. Please allow the slight color difference caused by the shooting light and 1-3cm error due to manual measurement, and make sure you do not mind before ordering. Feedback is very important to us. It is impossible to address issues if we do not know about them! Faction is our ultimate goal. We work hard to earn your trust and future business. A If you receive a defective item, you may return it or ask for a discount. Due to time zones, our reply to your questions may not be immediately. If it’s non-workdays, please kindly be patient and wait till Monday. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Welding & Soldering Equipment\Welding Equipment & Accessories\Welders, Cutters & Torches\TIG Welders”. The seller is “prtsery” and is located in this country: US. This item can be shipped to United States.

• Brand: Unbranded
• Model: ARC-120
• Color: Black
• Material: Plastic
• Style: Modern
• Plug Voltage: 110V
• Rated Output Voltage: 24.8V
• Output Curren: 20-120A ((1-Step=20A / 2-Step=40A / 3-Step=60A /4-Step=80A
• Rated Input Power: 4.6KW
• Enclosure Protection Grade: IP21
• Electrode: φ1.6-φ3.2
• Power Factor: 0.76
• Insulation Class: F
• Duty Cycle: at 40℃/104℉: 20%
• Working Temperature: -10~40℃/-50~104℉
• Efficiency: About 85%
• Power Type: Plug-in
• Plug: American Standard
• Net Weight: 2kg/4.41lbs
• Suitable Welding Rod Diameter: 2.5mm/0.09inch