ARCCAPTAIN 130A MIG Welder, 110V Flux Core MIG Welder/Lift TIG/Stick 3 in 1 Welding Machine with Synergy, IGBT Inverter Portable Gasless Welder Equipment with Welding Gun and 2lb Welding Wire. SYNERGIC CONTROL: The recom. Mend current and wire feeding speed will be automatically matched after selected diameter of the welding wireyou can choose. 040 flux core wire. The MIG welder is easier for beginners or those that are learning to weld and want to make small repairs around the house. 1 Free Flux Core Wire. Adjust the current and 10-speed variable feed controls for perfectly managed flux-cored welding of carbon steel, stainless or even thicker steel, Ideal for home DIY, outdoor repairs, rusty metal, farm and road equipment, and maintenance and repairs. SAFETY PROTECTION: The welder comes with an attached MIG torch and power cable, you can weld after unpacking the box, it’s convenient to use. Built-in over-current protection, over-load protection, overheating, and over-voltage function that extend the lifespan of the machine. PORTABLE AND COMPACT: The machine weighs only 11.79 pounds, and you can freely carry it anywhere with a handle or shoulder strap. Package includes 1 MIG130 Welder, 1 MIG Torch, 1Ground Clamp, 1 Electronic Holder, 1. 030/2lb Flux Cored Wire, 1 0.8/. 030 conductive Nozzle, 1 0.9/. 035 conductive Nozzle, 1 Brush&Hammer, 1 User Manual. Ideal for fathers day gifts. Every single of our welder machines passed various authoritative Laboratory tests in simulating extremely harsh environments before leaving our ARCCAPTAIN factory that conforms to the high standards. ARCCAPTAIN 130A MULTI-PROCESS FLUX CORE MIG/ MMA/ LIFT TIG WELDING MACHINE WITH A 2LB SPOOL WIRE. Synergic Control for MIG Mode: Automatically adjust current and Voltage, good choice for Home DIY and welding hobbyist. 3 Functions in 1 Multi-process Welder: Suitable for Flux core/gasless Mig, MMA, Lift Tig. Adjustable Welding Wire Feeding Speed: You can manually adjust the welding wire feeding speed as your need. Compact & Portable: Only 11.79 lbs, so you can effortlessly take it as far as you can. MMA functions: Built-in hot start, arc-force, anti-stick. Wide Applications: it can weld stainless steel and carbon steel etc. Safety Protection: Automatic compensation for voltage fluctuation, over-current protection, over-load protection and over-heating protection. 1 ARCCAPTAIN MIG130 Welder. 030/2lbs Flux Cored Wire. 1 Brush & Hammer. NO NEED TO INSTALL MIG TORCH. Locate the Ground Clamp w. Ith Cable and connect the plug on the cable end to the Positive Connector (+) on the Mig welder. Locate the Ground Clamp with Cable and connect the plug on the cable end to the Negative Connector (-) on the Welder. Electrode Holder to Positive Connector (+). Locate the Ground Clamp with Cable and connect the plug on the cable end to the Positive Connector (+) on the Welder. Lift tig to Negative Connector (-). Lift tig is optional(Tig torch is not included in package). Rated Input Voltage: AC110V 50Hz/ 60Hz. Welding Voltage (MIG): 16-20.5V. Welding Voltage (MMA): 20.8-25.2V. Welding Voltage(TIG): 10.8V-15.2V. Rated Duty Cycle: 60%. Applicable Wire: 0.6/0.8/ 0.9/ 1.0mm. Applicable Electrode: 1.6-3.2mm (1/16″-1/8″). Machine Dimension: 14.9 5.3 9.7 in. Machine Weight: 11.79 lbs. Real Tests and Durable. ARCCAPTAIN MIG Welder 130Amp was passed various authoritative Laboratory tests in simulating extremely harsh environments that conform to the high standards. The lab was Certified as an audited lab by TÜV Rheinland and as a Testing Facility for Witnessed Manufacturers’s Testing by CSA.
