TIG Welders Pulse Dual Volt 110V/220V 200AMP Inverter HF ARC TIG Welding Machine

TIG Welders Pulse Dual Volt 110V/220V 200AMP Inverter HF ARC TIG Welding Machine
TIG Welders Pulse Dual Volt 110V/220V 200AMP Inverter HF ARC TIG Welding Machine
TIG Welders Pulse Dual Volt 110V/220V 200AMP Inverter HF ARC TIG Welding Machine
TIG Welders Pulse Dual Volt 110V/220V 200AMP Inverter HF ARC TIG Welding Machine
TIG Welders Pulse Dual Volt 110V/220V 200AMP Inverter HF ARC TIG Welding Machine
TIG Welders Pulse Dual Volt 110V/220V 200AMP Inverter HF ARC TIG Welding Machine
TIG Welders Pulse Dual Volt 110V/220V 200AMP Inverter HF ARC TIG Welding Machine
TIG Welders Pulse Dual Volt 110V/220V 200AMP Inverter HF ARC TIG Welding Machine
TIG Welders Pulse Dual Volt 110V/220V 200AMP Inverter HF ARC TIG Welding Machine
TIG Welders Pulse Dual Volt 110V/220V 200AMP Inverter HF ARC TIG Welding Machine
TIG Welders Pulse Dual Volt 110V/220V 200AMP Inverter HF ARC TIG Welding Machine
TIG Welders Pulse Dual Volt 110V/220V 200AMP Inverter HF ARC TIG Welding Machine

TIG Welders Pulse Dual Volt 110V/220V 200AMP Inverter HF ARC TIG Welding Machine
HITBOX TIG Welders Pulse Dual Volt 110V/220V 200AMP Inverter HF ARC TIG Welding Machine. HITBOX 110V 220V Tig Welder Pulse 200A Dual Voltage Arc D/C Stick MMA Inverter IGBT Digital Welding Machine 60% Ducty Cycle High Frequency Digital Control. TIG PULSE FUNCTION – With tig pulse function, welding current will constantly changes from a high (peak) amperage down to a low (basic or background) current and back again automatically. This allows for welding thinner metals and high heat conductive metals without burning through. On thicker metals you can achieve tighter narrower more penetrating welds. ARC FUNCTION – This TIG200P welder can weld 1.5-12mm thickness board. It can use 2.5mm, 3.2mm and 4.0mm rods. Can weld 4.0mm rods for a long time. This welder comes with arc force, anti stick function. Easy to strike an arc, little spatter, stable current, and good performance. 4M DIGITAL TIG TORCH – There were four button on the tig torch. The function of them is switch on/ off HF, higher current, lower current and test gas. With this 4m long tig torch, you can do a far distance welding job. PULES TIG & TIG & MMA(ARC/STICK) 3 IN1 DC Inverter welder. Digital Control Front Panel enable to easily operate. IGBT technology inverter – Latest transistor technology more efficient so enables highest power and a duty cycle of 60% at full power. No transformer, no MOSFET, modern IGBT. Smooth arc and stable welding performance. DC TIG function for welding stainless steel, carbon steel, copper and non-ferrous metals except aluminium and aluminium alloys. PULES TIG function for particularly welding thin plate through regulating the parameters: basic current, pulse duty, pulse frequency. Start/End Current and regulating Upslope/Downslope time- prevents voids to improve the welding quality at the start and end of the welding. 2T, 4T MODES are available determines the control of the operating mode and provides extended control over the current flow. In 2T mode, high-frequency ignition (HF) remains active until the button on the torch is released. In 4T mode the arc is ignited after a single press and release of the button. After pressing and releasing again, the ignition is stopped. Upslope, Downslope time can be adjustable in the range 0 – 10s. Pre-flow and Post flow time can be adjustable in the range 0 – 15s (protects the tungsten electrode against excessive wear and protects the weld from oxidation). Pulse frequency can be adjustable in the range 0.2 – 200Hz. Pulse duty ratio can be adjustable in the range 10% – 90%. High Frequency Ignition – Easy ARC starting by non-contact ignition, improves tungsten life and ensures a much better welding result. 0 – 9 Channels memory button can save 10 groups previous TIG welding parameters. MMA welding with Auto hot-start, ARC Force and Anti-stick technology. Usable electrode 1.6 – 4.0mm on MMA welding mode. Compact portable design and light weight. Rated voltage: 110V /220V. Rated input current(A): MMA:43.6A TIG:28A. No-load voltage(V): 59V. Output current(A): 30-200A. Rated Output voltage(V): MMA:28V TIG:18V. Duty cycle(%): 60%. No-load loss(W): 40W. Housing protection grade: IP21S. 1pcs x TIG Welder. 1pcs x Digtal Tig torch. 1pcs x Earth Clamp. 1pcs x Electrode Holder. 1pcs x Gas Tube. 1pcs x 110V-220V Adapter. Item Processing Time: The processing time for a specific order varies with the product type and stock status. All our item offer 7 days return peroid, defective or non-defective. Return must include all original package and accesorries, item must in good condition. If you have any issue, you can just give us a message, and we give you full resolve. Please be patient when contacting us, all messages will be replied within 24 hours. Please let us know immediately if a package is damaged upon arrival. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Welding & Soldering Equipment\Welding Equipment & Accessories\Welders, Cutters & Torches\TIG Welders”. The seller is “hitboxstore” and is located in this country: US. This item can be shipped to United States.
  • Brand: HITBOX
  • Models: Tig 200 DC PULSE
  • Rated Input Power (KVA): 7.0
  • ieff (Amps): 14.6
  • Rated Input Current (A): 20.0
  • Power factor: 0.7
  • Welding current range(A): 5-200
  • No-load voltage(V): 43
  • Efficiency: ≥85%
  • Protection class: IP21
  • Welding Process: Pulsed TIG
  • Polarity: DC
  • Item Type: Inverter Welder
  • Welded Material: Carbon steel, galvanized sheet, stainless steel
  • Weight: 10.05KG (22LB)
  • Size: 46*21*40cm(18.11*8.26*15.74in)

TIG Welders Pulse Dual Volt 110V/220V 200AMP Inverter HF ARC TIG Welding Machine

2 in 1 LED TIG Welders Pulse 200AMP 110V/220V HF ARC Stick TIG Welding Machine

2 in 1 LED TIG Welders Pulse 200AMP 110V/220V HF ARC Stick TIG Welding Machine
2 in 1 LED TIG Welders Pulse 200AMP 110V/220V HF ARC Stick TIG Welding Machine
2 in 1 LED TIG Welders Pulse 200AMP 110V/220V HF ARC Stick TIG Welding Machine
2 in 1 LED TIG Welders Pulse 200AMP 110V/220V HF ARC Stick TIG Welding Machine
2 in 1 LED TIG Welders Pulse 200AMP 110V/220V HF ARC Stick TIG Welding Machine
2 in 1 LED TIG Welders Pulse 200AMP 110V/220V HF ARC Stick TIG Welding Machine
2 in 1 LED TIG Welders Pulse 200AMP 110V/220V HF ARC Stick TIG Welding Machine
2 in 1 LED TIG Welders Pulse 200AMP 110V/220V HF ARC Stick TIG Welding Machine
2 in 1 LED TIG Welders Pulse 200AMP 110V/220V HF ARC Stick TIG Welding Machine
2 in 1 LED TIG Welders Pulse 200AMP 110V/220V HF ARC Stick TIG Welding Machine
2 in 1 LED TIG Welders Pulse 200AMP 110V/220V HF ARC Stick TIG Welding Machine
2 in 1 LED TIG Welders Pulse 200AMP 110V/220V HF ARC Stick TIG Welding Machine

2 in 1 LED TIG Welders Pulse 200AMP 110V/220V HF ARC Stick TIG Welding Machine
You may also like. 2 in 1 LED TIG Welders Pulse 200AMP 110V/220V HF ARC Stick TIG Welding Machine. HITBOX 110V 220V Tig Welder Pulse 200A Dual Voltage Arc D/C Stick MMA Inverter IGBT Digital Welding Machine 60% Ducty Cycle High Frequency Digital Control. TIG PULSE FUNCTION – With tig pulse function, welding current will constantly changes from a high (peak) amperage down to a low (basic or background) current and back again automatically. This allows for welding thinner metals and high heat conductive metals without burning through. On thicker metals you can achieve tighter narrower more penetrating welds. ARC FUNCTION – This TIG200P welder can weld 1.5-12mm thickness board. It can use 2.5mm, 3.2mm and 4.0mm rods. Can weld 4.0mm rods for a long time. This welder comes with arc force, anti stick function. Easy to strike an arc, little spatter, stable current, and good performance. 4M DIGITAL TIG TORCH – There were four button on the tig torch. The function of them is switch on/ off HF, higher current, lower current and test gas. With this 4m long tig torch, you can do a far distance welding job. PULES TIG & TIG & MMA(ARC/STICK) 3 IN1 DC Inverter welder. Digital Control Front Panel enable to easily operate. IGBT technology inverter – Latest transistor technology more efficient so enables highest power and a duty cycle of 60% at full power. No transformer, no MOSFET, modern IGBT. Smooth arc and stable welding performance. DC TIG function for welding stainless steel, carbon steel, copper and non-ferrous metals except aluminium and aluminium alloys. PULES TIG function for particularly welding thin plate through regulating the parameters: basic current, pulse duty, pulse frequency. Start/End Current and regulating Upslope/Downslope time- prevents voids to improve the welding quality at the start and end of the welding. 2T, 4T MODES are available determines the control of the operating mode and provides extended control over the current flow. In 2T mode, high-frequency ignition (HF) remains active until the button on the torch is released. In 4T mode the arc is ignited after a single press and release of the button. After pressing and releasing again, the ignition is stopped. Upslope, Downslope time can be adjustable in the range 0 – 10s. Pre-flow and Post flow time can be adjustable in the range 0 – 15s (protects the tungsten electrode against excessive wear and protects the weld from oxidation). Pulse frequency can be adjustable in the range 0.2 – 200Hz. Pulse duty ratio can be adjustable in the range 10% – 90%. High Frequency Ignition – Easy ARC starting by non-contact ignition, improves tungsten life and ensures a much better welding result. 0 – 9 Channels memory button can save 10 groups previous TIG welding parameters. MMA welding with Auto hot-start, ARC Force and Anti-stick technology. Usable electrode 1.6 – 4.0mm on MMA welding mode. Compact portable design and light weight. Rated voltage: 110V /220V. Rated input current(A): MMA:43.6A TIG:28A. Output current(A): 30-200A. Rated Output voltageV: MMA:28V TIG:18V. Duty cycle(%): 60%. No-load loss(W): 40W. Housing protection grade: IP21S. Size: 9×14.4×5.2inch / 23X36.5X13.3cm Net Weight: 12.5lb / 5.65 KG. 1pcs x TIG Welder. 1pcs x High frequency Tig torch torch. 1pcs x Earth clamp. 1pcs x Electrode holder. 1pcs x Gas tube. Item Processing Time: The processing time for a specific order varies with the product type and stock status. All our item offer 7 days return peroid, defective or non-defective. Return must include all original package and accesorries, item must in good condition. If you have any issue, you can just give us a message, and we give you full resolve. Please be patient when contacting us, all messages will be replied within 24 hours. Please let us know immediately if a package is damaged upon arrival. The item “2 in 1 LED TIG Welders Pulse 200AMP 110V/220V HF ARC Stick TIG Welding Machine” is in sale since Friday, August 13, 2021. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Welding & Soldering Equipment\Welding Equipment & Accessories\Welders, Cutters & Torches\TIG Welders”. The seller is “hitboxstore” and is located in Monroe Township, New Jersey. This item can be shipped to United States.
  • Brand: HITBOX
  • MPN: Does Not Apply
  • Models: Tig 200 DC PULSE
  • Input power: Single phase,220V-240V, 50/60Hz
  • Rated Input Power (KVA): 7.0
  • ieff (Amps): 14.6
  • Rated Input Current (A): 20.0
  • Power factor: 0.7
  • Welding current rangeA: 5-200
  • No-load voltage(V): 43
  • Efficiency: 85
  • Protection class: IP21
  • Welding Process: Pulsed TIG
  • Polarity: DC
  • Item Type: Inverter Welder
  • Welded Material: Carbon steel, galvanized sheet, stainless steel
  • Warrantly: 2 Years

2 in 1 LED TIG Welders Pulse 200AMP 110V/220V HF ARC Stick TIG Welding Machine

TIG Welders 200AMP 110V/220V Pluse High Frequency ARC Stick TIG Welding Machine

TIG Welders 200AMP 110V/220V Pluse High Frequency ARC Stick TIG Welding Machine
TIG Welders 200AMP 110V/220V Pluse High Frequency ARC Stick TIG Welding Machine
TIG Welders 200AMP 110V/220V Pluse High Frequency ARC Stick TIG Welding Machine
TIG Welders 200AMP 110V/220V Pluse High Frequency ARC Stick TIG Welding Machine
TIG Welders 200AMP 110V/220V Pluse High Frequency ARC Stick TIG Welding Machine
TIG Welders 200AMP 110V/220V Pluse High Frequency ARC Stick TIG Welding Machine
TIG Welders 200AMP 110V/220V Pluse High Frequency ARC Stick TIG Welding Machine
TIG Welders 200AMP 110V/220V Pluse High Frequency ARC Stick TIG Welding Machine
TIG Welders 200AMP 110V/220V Pluse High Frequency ARC Stick TIG Welding Machine
TIG Welders 200AMP 110V/220V Pluse High Frequency ARC Stick TIG Welding Machine
TIG Welders 200AMP 110V/220V Pluse High Frequency ARC Stick TIG Welding Machine

TIG Welders 200AMP 110V/220V Pluse High Frequency ARC Stick TIG Welding Machine
You may also like. TIG Welders 200AMP 110V/220V Pluse High Frequency ARC Stick TIG Welding Machine. HITBOX 110V/220V Tig Welder Pulse 200A Dual Voltage Arc D/C Stick MMA Inverter IGBT Digital Welding Machine – 60% Ducty Cycle High Frequency Digital Control. Latest IGBT Inverter Technology. Digital Weld Program Sequence Control. DC TIG (DC tungsten inert gas welding). HF Arc Ignition (prevents tungsten inclusion & tungsten damage). Adjustable Pulse Frequency 0.5 – 200Hz. Peak Current, Base Current and Pulse Width Adjustment. 2/4T Trigger + Spot Time Adjustment. Start & Final Current Adjustment. Pre and Post Gas Flow Adjustment. Up and Down Slope Adjustment. Remote Torch Amp Control. Generator compatible (recommend 9.0KVA 230V). DC MMA, polarity connection can be chosen according to different electrodes. DC TIG, DCEP is used normally workpiece connected to positive polarity, while torch connected to. This connection has many characters, such as stable welding arc, low tungsten pole loss. More welding current, narrow and deep weld. DC Pulsed TIG has the following characters. Metal in Molten pool has short time on high. Temperature status and freezes quickly, which can reduce the possibility to produce hot crack of the materials with thermal sensitivity. 2 The workpiece gets little heat. Arc energy is focused. Be suitable for thin sheet and super thin sheet welding. 3 Exactly control heat input and the size of the molten pool. Depth of penetration is even. Be suitable for welding by one side and forming by two sides and all position. 4 High frequency arc can make metal for microlite fabric, eliminate blowhole and improve the mechanical performance of the joint. 5 High frequency arc is suitable for high welding speed to improve the productivity. 1pcs x Earth clamp. 1pcs x Electrode holder. 1pcs x Gas tube. 1pcs x Digtal TIG Torch. 1pcs x Gas Regulator. Item Processing Time: The processing time for a specific order varies with the product type and stock. All our item offer 7 days return peroid, defective or non-defective. Return must include all original package and accesorries, item must in good condition. If you have any issue, you can just give us a message, and we give you full resolve. Please be patient when contacting us, all messages will be replied within 24 hours. Please let us know immediately if a package is damaged upon arrival. Taking any action, please co. Can to help you. The item “TIG Welders 200AMP 110V/220V Pluse High Frequency ARC Stick TIG Welding Machine” is in sale since Thursday, April 15, 2021. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Welding & Soldering Equipment\Welding Equipment & Accessories\Welders, Cutters & Torches\TIG Welders”. The seller is “hitboxstore” and is located in Chino, California. This item can be shipped to United States.
  • Brand: HITBOX
  • MPN: Does Not Apply
  • Models: Tig 200 DC PULSE
  • Input power: Single phase,220V-240V, 50/60Hz
  • Rated Input Power (KVA): 7.0
  • ieff (Amps): 14.6
  • Rated Input Current (A): 20.0
  • Power factor: 0.7
  • Welding current rangeA: 5-200
  • No-load voltage(V): 43
  • Efficiency: 85
  • Protection class: IP21
  • Welding Process: Pulsed TIG
  • Polarity: DC
  • Item Type: Inverter Welder
  • Welded Material: Carbon steel, galvanized sheet, stainless steel
  • Warrantly: 2 Years

TIG Welders 200AMP 110V/220V Pluse High Frequency ARC Stick TIG Welding Machine

TIG Welders 200AMP 110V/220V Pluse High Frequency ARC Stick TIG Welding Machine

TIG Welders 200AMP 110V/220V Pluse High Frequency ARC Stick TIG Welding Machine
TIG Welders 200AMP 110V/220V Pluse High Frequency ARC Stick TIG Welding Machine
TIG Welders 200AMP 110V/220V Pluse High Frequency ARC Stick TIG Welding Machine
TIG Welders 200AMP 110V/220V Pluse High Frequency ARC Stick TIG Welding Machine
TIG Welders 200AMP 110V/220V Pluse High Frequency ARC Stick TIG Welding Machine
TIG Welders 200AMP 110V/220V Pluse High Frequency ARC Stick TIG Welding Machine
TIG Welders 200AMP 110V/220V Pluse High Frequency ARC Stick TIG Welding Machine
TIG Welders 200AMP 110V/220V Pluse High Frequency ARC Stick TIG Welding Machine
TIG Welders 200AMP 110V/220V Pluse High Frequency ARC Stick TIG Welding Machine
TIG Welders 200AMP 110V/220V Pluse High Frequency ARC Stick TIG Welding Machine
TIG Welders 200AMP 110V/220V Pluse High Frequency ARC Stick TIG Welding Machine

TIG Welders 200AMP 110V/220V Pluse High Frequency ARC Stick TIG Welding Machine
You may also like. TIG Welders 200AMP 110V/220V Pluse High Frequency ARC Stick TIG Welding Machine. HITBOX 110V/220V Tig Welder Pulse 200A Dual Voltage Arc D/C Stick MMA Inverter IGBT Digital Welding Machine – 60% Ducty Cycle High Frequency Digital Control. Latest IGBT Inverter Technology. Digital Weld Program Sequence Control. DC TIG (DC tungsten inert gas welding). HF Arc Ignition (prevents tungsten inclusion & tungsten damage). Adjustable Pulse Frequency 0.5 – 200Hz. Peak Current, Base Current and Pulse Width Adjustment. 2/4T Trigger + Spot Time Adjustment. Start & Final Current Adjustment. Pre and Post Gas Flow Adjustment. Up and Down Slope Adjustment. Remote Torch Amp Control. Generator compatible (recommend 9.0KVA 230V). DC MMA, polarity connection can be chosen according to different electrodes. DC TIG, DCEP is used normally workpiece connected to positive polarity, while torch connected to. This connection has many characters, such as stable welding arc, low tungsten pole loss. More welding current, narrow and deep weld. DC Pulsed TIG has the following characters. Metal in Molten pool has short time on high. Temperature status and freezes quickly, which can reduce the possibility to produce hot crack of the materials with thermal sensitivity. 2 The workpiece gets little heat. Arc energy is focused. Be suitable for thin sheet and super thin sheet welding. 3 Exactly control heat input and the size of the molten pool. Depth of penetration is even. Be suitable for welding by one side and forming by two sides and all position. 4 High frequency arc can make metal for microlite fabric, eliminate blowhole and improve the mechanical performance of the joint. 5 High frequency arc is suitable for high welding speed to improve the productivity. 1pcs x Earth clamp. 1pcs x Electrode holder. 1pcs x Gas tube. 1pcs x Digtal TIG Torch. 1pcs x Welding Helmet. Item Processing Time: The processing time for a specific order varies with the product type and stock. All our item offer 7 days return peroid, defective or non-defective. Return must include all original package and accesorries, item must in good condition. If you have any issue, you can just give us a message, and we give you full resolve. Please be patient when contacting us, all messages will be replied within 24 hours. Please let us know immediately if a package is damaged upon arrival. Taking any action, please co. Can to help you. The item “TIG Welders 200AMP 110V/220V Pluse High Frequency ARC Stick TIG Welding Machine” is in sale since Wednesday, September 30, 2020. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Welding & Soldering Equipment\Welding Equipment & Accessories\Welders, Cutters & Torches\TIG Welders”. The seller is “hitboxstore” and is located in Chino, California. This item can be shipped to United States.
  • Brand: HITBOX
  • MPN: Does Not Apply
  • Models: Tig 200 DC PULSE
  • Input power: Single phase,220V-240V, 50/60Hz
  • Rated Input Power (KVA): 7.0
  • ieff (Amps): 14.6
  • Rated Input Current (A): 20.0
  • Power factor: 0.7
  • Welding current rangeA: 5-200
  • No-load voltage(V): 43
  • Efficiency: 85
  • Protection class: IP21
  • Welding Process: Pulsed TIG
  • Polarity: DC
  • Item Type: Inverter Welder
  • Welded Material: Carbon steel, galvanized sheet, stainless steel
  • Warrantly: 2 Years

TIG Welders 200AMP 110V/220V Pluse High Frequency ARC Stick TIG Welding Machine

TIG Welders 200AMP 110V/220V Pluse HF Inverter ARC Stick TIG Welding Machine

TIG Welders 200AMP 110V/220V Pluse HF Inverter ARC Stick TIG Welding Machine
TIG Welders 200AMP 110V/220V Pluse HF Inverter ARC Stick TIG Welding Machine
TIG Welders 200AMP 110V/220V Pluse HF Inverter ARC Stick TIG Welding Machine
TIG Welders 200AMP 110V/220V Pluse HF Inverter ARC Stick TIG Welding Machine
TIG Welders 200AMP 110V/220V Pluse HF Inverter ARC Stick TIG Welding Machine
TIG Welders 200AMP 110V/220V Pluse HF Inverter ARC Stick TIG Welding Machine
TIG Welders 200AMP 110V/220V Pluse HF Inverter ARC Stick TIG Welding Machine
TIG Welders 200AMP 110V/220V Pluse HF Inverter ARC Stick TIG Welding Machine
TIG Welders 200AMP 110V/220V Pluse HF Inverter ARC Stick TIG Welding Machine
TIG Welders 200AMP 110V/220V Pluse HF Inverter ARC Stick TIG Welding Machine
TIG Welders 200AMP 110V/220V Pluse HF Inverter ARC Stick TIG Welding Machine
TIG Welders 200AMP 110V/220V Pluse HF Inverter ARC Stick TIG Welding Machine

TIG Welders 200AMP 110V/220V Pluse HF Inverter ARC Stick TIG Welding Machine
You may also like. TIG Welders 200AMP 110V/220V Pluse HF Inverter ARC Stick TIG Welding Machine. HITBOX 110V/220V Tig Welder Pulse 200A Dual Voltage Arc D/C Stick MMA Inverter IGBT Digital Welding Machine – 60% Ducty Cycle High Frequency Digital Control. Latest IGBT Inverter Technology. Digital Weld Program Sequence Control. DC TIG (DC tungsten inert gas welding). HF Arc Ignition (prevents tungsten inclusion & tungsten damage). Adjustable Pulse Frequency 0.5 – 200Hz. Peak Current, Base Current and Pulse Width Adjustment. 2/4T Trigger + Spot Time Adjustment. Start & Final Current Adjustment. Pre and Post Gas Flow Adjustment. Up and Down Slope Adjustment. Remote Torch Amp Control. Generator compatible (recommend 9.0KVA 230V). DC MMA, polarity connection can be chosen according to different electrodes. DC TIG, DCEP is used normally workpiece connected to positive polarity, while torch connected to. This connection has many characters, such as stable welding arc, low tungsten pole loss. More welding current, narrow and deep weld. DC Pulsed TIG has the following characters. Metal in Molten pool has short time on high. Temperature status and freezes quickly, which can reduce the possibility to produce hot crack of the materials with thermal sensitivity. 2 The workpiece gets little heat. Arc energy is focused. Be suitable for thin sheet and super thin sheet welding. 3 Exactly control heat input and the size of the molten pool. Depth of penetration is even. Be suitable for welding by one side and forming by two sides and all position. 4 High frequency arc can make metal for microlite fabric, eliminate blowhole and improve the mechanical performance of the joint. 5 High frequency arc is suitable for high welding speed to improve the productivity. 1pcs x Earth clamp. 1pcs x Electrode holder. 1pcs x Gas tube. 1pcs x Digtal TIG Torch. Item Processing Time: The processing time for a specific order varies with the product type and stock. All our item offer 7 days return peroid, defective or non-defective. Return must include all original package and accesorries, item must in good condition. If you have any issue, you can just give us a message, and we give you full resolve. Please be patient when contacting us, all messages will be replied within 24 hours. Please let us know immediately if a package is damaged upon arrival. Taking any action, please co. Can to help you. The item “TIG Welders 200AMP 110V/220V Pluse HF Inverter ARC Stick TIG Welding Machine” is in sale since Friday, December 18, 2020. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Welding & Soldering Equipment\Welding Equipment & Accessories\Welders, Cutters & Torches\TIG Welders”. The seller is “hitboxcity” and is located in Monroe Township, New Jersey. This item can be shipped to United States.
  • Brand: HITBOX
  • MPN: Does Not Apply
  • Models: Tig 200 PULSE
  • Input power: Single phase,220V-240V, 50/60Hz
  • Rated Input Power (KVA): 7.0
  • ieff (Amps): 14.6
  • Rated Input Current (A): 20.0
  • Power factor: 0.7
  • Welding current rangeA: 5-200
  • No-load voltage(V): 43
  • Efficiency: 85
  • Protection class: IP21
  • Welding Process: Pulsed TIG
  • Polarity: DC
  • Item Type: Inverter Welder
  • Welded Material: Carbon steel, galvanized sheet, stainless steel
  • Warrantly: 2 Years

TIG Welders 200AMP 110V/220V Pluse HF Inverter ARC Stick TIG Welding Machine