The machine is not same with Model: MIG-205DS. The machine can’t weld Aluminum. MIG-200 220V 200Amp MIG/Stick/TIG Multi-Process Welder. MIG-200 is a versatile 3-in-1 multi-process welder with MIG synergic control. Its IGBT inverter technology ensures high power in a lightweight, compact unit (21.83 lbs), making it suitable for various applications including hardware, car modification, equipment, and factory maintenance. The unit is capable of performing MIG, lift TIG, and stick welding, offering flexibility and convenience for users. Input Voltage: 220VAC, 50/60 Hz. 110V is not Available. Output Current: 30-200A(MIG)/ 20-180A(MMA)/ 30-200A(TIG). Please do not using MIG 200 with rainy day or placing with water. Please use the compressor to clean the machine, after using in a dusty environment or not using it for a long time. Do not weld gas MIG/Lift TIG without connecting gas. Do not weld Aluminum plate. Gasless/ Gas MIG Welding. Can handle 2 lbs and 10lbs rolls of wire. Gas MIG, recommended to use. 030 (0.8mm) &. 035 (0.9mm) ER70S-6 in CO2/MIG and 25%CO2 / 75% Argon MAG. But you can manually set tension 3.5& Amp >100A for 0.8mm. Synergic Control MIG Function allows the automatic change of the voltage & wire feeding speed by adjusting the amperage or choosing different thicknesses. It will match the welding chart set in the data. 2T/4T design: 2T is suitable for shorter welds and gives the operator more control over the start and stop of the welding process. 4T is suitable for longer welds as the operator does not have to hold down the trigger for the entire duration of the weld. DC Stick/ Lift TIG Available. (Accessories for TIG Welding not included). 2T/ 4T Design: 2T: trigger mode used in welding where the operator presses the trigger to start welding and releases it to stop. 4T: trigger mode used in welding where the operator presses the trigger once to start the weld and presses it again to stop. Welding Method: Switching in different welding conditions. MIG/ CO2- CO2 100%, MAG- CO2 25% Argon 75% solid wire ER70S-6, Stick Welding, Lift tig welding, Gasless-Flux wire 0.9mm. Diameter of Wire: Switching in different welding conditions. 035 on MIG/ CO2 and MAG conditions. The Gasless welding only available for 0.9. 035 ET71-GS flux wire. Display showing with various value: A, V, Thickness and inductance. (Amperage-When we select different values, the wire feeding speed and voltage will automatically match the welding chart built-in). Manual Wire Feed Button.
