Digital 110V/220V TIG Welders Pulse 200AMP HF Inverter ARC TIG Welding Machine

Digital 110V/220V TIG Welders Pulse 200AMP HF Inverter ARC TIG Welding Machine
Digital 110V/220V TIG Welders Pulse 200AMP HF Inverter ARC TIG Welding Machine
Digital 110V/220V TIG Welders Pulse 200AMP HF Inverter ARC TIG Welding Machine
Digital 110V/220V TIG Welders Pulse 200AMP HF Inverter ARC TIG Welding Machine
Digital 110V/220V TIG Welders Pulse 200AMP HF Inverter ARC TIG Welding Machine
Digital 110V/220V TIG Welders Pulse 200AMP HF Inverter ARC TIG Welding Machine
Digital 110V/220V TIG Welders Pulse 200AMP HF Inverter ARC TIG Welding Machine
Digital 110V/220V TIG Welders Pulse 200AMP HF Inverter ARC TIG Welding Machine
Digital 110V/220V TIG Welders Pulse 200AMP HF Inverter ARC TIG Welding Machine
Digital 110V/220V TIG Welders Pulse 200AMP HF Inverter ARC TIG Welding Machine
Digital 110V/220V TIG Welders Pulse 200AMP HF Inverter ARC TIG Welding Machine

Digital 110V/220V TIG Welders Pulse 200AMP HF Inverter ARC TIG Welding Machine
HITBOX TIG Welders Pulse 200AMP 110V/220V HF Inverter ARC TIG Welding Machine. HITBOX 110V/220V Tig Welder Pulse 200A Dual Voltage Arc D/C Stick MMA Inverter IGBT Digital Welding Machine 60% Ducty Cycle High Frequency Digital Control. TIG PULSE FUNCTION – With tig pulse function, welding current will constantly changes from a high (peak) amperage down to a low (basic or background) current and back again automatically. This allows for welding thinner metals and high heat conductive metals without burning through. On thicker metals you can achieve tighter narrower more penetrating welds. ARC FUNCTION – This TIG200P welder can weld 1.5-12mm thickness board. It can use 2.5mm, 3.2mm and 4.0mm rods. Can weld 4.0mm rods for a long time. This welder comes with arc force, anti stick function. Easy to strike an arc, little spatter, stable current, and good performance. 4M DIGITAL TIG TORCH – There were four button on the tig torch. The function of them is switch on/ off HF, higher current, lower current and test gas. With this 4m long tig torch, you can do a far distance welding job. PULES TIG & TIG & MMA(ARC/STICK) 3 IN1 DC Inverter welder. Digital Control Front Panel enable to easily operate. IGBT technology inverter – Latest transistor technology more efficient so enables highest power and a duty cycle of 60% at full power. No transformer, no MOSFET, modern IGBT. Smooth arc and stable welding performance. DC TIG function for welding stainless steel, carbon steel, copper and non-ferrous metals except aluminium and aluminium alloys. PULES TIG function for particularly welding thin plate through regulating the parameters: basic current, pulse duty, pulse frequency. Start/End Current and regulating Upslope/Downslope time- prevents voids to improve the welding quality at the start and end of the welding. 2T, 4T MODES are available determines the control of the operating mode and provides extended control over the current flow. In 2T mode, high-frequency ignition (HF) remains active until the button on the torch is released. In 4T mode the arc is ignited after a single press and release of the button. After pressing and releasing again, the ignition is stopped. Upslope, Downslope time can be adjustable in the range 0 – 10s. Pre-flow and Post flow time can be adjustable in the range 0 – 15s (protects the tungsten electrode against excessive wear and protects the weld from oxidation). Pulse frequency can be adjustable in the range 0.2 – 200Hz. Pulse duty ratio can be adjustable in the range 10% – 90%. High Frequency Ignition – Easy ARC starting by non-contact ignition, improves tungsten life and ensures a much better welding result. 0 – 9 Channels memory button can save 10 groups previous TIG welding parameters. MMA welding with Auto hot-start, ARC Force and Anti-stick technology. Usable electrode 1.6 – 4.0mm on MMA welding mode. Compact portable design and light weight. Rated voltage(V): 110V/220V. Rated input current(A): MMA:43.6A TIG:28A. No-load voltage(V): 59V. Output current(A): 30-200A. Rated Output voltage(V): MMA:28V TIG:18V. Duty cycle(%): 60%. No-load loss(W): 40W. Housing protection grade: IP21S. Size: 462140cm(18.118.2615.74in). Weight: 10.05KG (22LB). 1pcs x TIG Welder. 1pcs x Digtal High frequency Tig torch torch. 1pcs x Earth clamp. 1pcs x Electrode holder. 1pcs x Gas tube. 1pcs 110V 220V Cable adapter. Item Processing Time: The processing time for a specific order varies with the product type and stock status. All our item offer 7 days return peroid, defective or non-defective. Return must include all original package and accesorries, item must in good condition. If you have any issue, you can just give us a message, and we give you full resolve. Please be patient when contacting us, all messages will be replied within 24 hours. Please let us know immediately if a package is damaged upon arrival. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Welding & Soldering Equipment\Welding Equipment & Accessories\Welders, Cutters & Torches\TIG Welders”. The seller is “hitboxcity” and is located in this country: US. This item can be shipped to United States.
  • Brand: HITBOX
  • Models: Tig 200 DC PULSE
  • Input power: 110V/220V
  • Rated Input Power (KVA): 7.0
  • ieff (Amps): 14.6
  • Rated Input Current (A): 20.0
  • Power factor: 0.7
  • Welding current range(A): 5-200
  • No-load voltage(V): 43
  • Efficiency: ≥85%
  • Protection class: IP21
  • Welding Process: Pulsed TIG
  • Polarity: DC
  • Item Type: Inverter Welder
  • Welded Material: Carbon steel, galvanized sheet, stainless steel
  • Warrantly: 2 Years

Digital 110V/220V TIG Welders Pulse 200AMP HF Inverter ARC TIG Welding Machine

HITBOX TIG Welders Pulse 200AMP 110V/220V HF Inverter ARC TIG Welding Machine

HITBOX TIG Welders Pulse 200AMP 110V/220V HF Inverter ARC TIG Welding Machine
HITBOX TIG Welders Pulse 200AMP 110V/220V HF Inverter ARC TIG Welding Machine
HITBOX TIG Welders Pulse 200AMP 110V/220V HF Inverter ARC TIG Welding Machine
HITBOX TIG Welders Pulse 200AMP 110V/220V HF Inverter ARC TIG Welding Machine
HITBOX TIG Welders Pulse 200AMP 110V/220V HF Inverter ARC TIG Welding Machine
HITBOX TIG Welders Pulse 200AMP 110V/220V HF Inverter ARC TIG Welding Machine
HITBOX TIG Welders Pulse 200AMP 110V/220V HF Inverter ARC TIG Welding Machine
HITBOX TIG Welders Pulse 200AMP 110V/220V HF Inverter ARC TIG Welding Machine
HITBOX TIG Welders Pulse 200AMP 110V/220V HF Inverter ARC TIG Welding Machine
HITBOX TIG Welders Pulse 200AMP 110V/220V HF Inverter ARC TIG Welding Machine
HITBOX TIG Welders Pulse 200AMP 110V/220V HF Inverter ARC TIG Welding Machine
HITBOX TIG Welders Pulse 200AMP 110V/220V HF Inverter ARC TIG Welding Machine

HITBOX TIG Welders Pulse 200AMP 110V/220V HF Inverter ARC TIG Welding Machine
HITBOX 200AMP TIG Welders Pulse 110V/220V HF Inverter ARC TIG Welding Machine. HITBOX 110V 220V Tig Welder Pulse 200A Dual Voltage Arc D/C Stick MMA Inverter IGBT Digital Welding Machine 60% Ducty Cycle High Frequency Digital Control. TIG PULSE FUNCTION – With tig pulse function, welding current will constantly changes from a high (peak) amperage down to a low (basic or background) current and back again automatically. This allows for welding thinner metals and high heat conductive metals without burning through. On thicker metals you can achieve tighter narrower more penetrating welds. ARC FUNCTION – This TIG200P welder can weld 1.5-12mm thickness board. It can use 2.5mm, 3.2mm and 4.0mm rods. Can weld 4.0mm rods for a long time. This welder comes with arc force, anti stick function. Easy to strike an arc, little spatter, stable current, and good performance. 4M DIGITAL TIG TORCH – There were four button on the tig torch. The function of them is switch on/ off HF, higher current, lower current and test gas. With this 4m long tig torch, you can do a far distance welding job. PULES TIG & TIG & MMA(ARC/STICK) 3 IN1 DC Inverter welder. Digital Control Front Panel enable to easily operate. IGBT technology inverter – Latest transistor technology more efficient so enables highest power and a duty cycle of 60% at full power. No transformer, no MOSFET, modern IGBT. Smooth arc and stable welding performance. DC TIG function for welding stainless steel, carbon steel, copper and non-ferrous metals except aluminium and aluminium alloys. PULES TIG function for particularly welding thin plate through regulating the parameters: basic current, pulse duty, pulse frequency. Start/End Current and regulating Upslope/Downslope time- prevents voids to improve the welding quality at the start and end of the welding. 2T, 4T MODES are available determines the control of the operating mode and provides extended control over the current flow. In 2T mode, high-frequency ignition (HF) remains active until the button on the torch is released. In 4T mode the arc is ignited after a single press and release of the button. After pressing and releasing again, the ignition is stopped. Upslope, Downslope time can be adjustable in the range 0 – 10s. Pre-flow and Post flow time can be adjustable in the range 0 – 15s (protects the tungsten electrode against excessive wear and protects the weld from oxidation). Pulse frequency can be adjustable in the range 0.2 – 200Hz. Pulse duty ratio can be adjustable in the range 10% – 90%. High Frequency Ignition – Easy ARC starting by non-contact ignition, improves tungsten life and ensures a much better welding result. 0 – 9 Channels memory button can save 10 groups previous TIG welding parameters. MMA welding with Auto hot-start, ARC Force and Anti-stick technology. Usable electrode 1.6 – 4.0mm on MMA welding mode. Compact portable design and light weight. Rated voltage: 110V /220V. Rated input current(A): MMA:43.6A TIG:28A. No-load voltage(V): 59V. Output current(A): 30-200A. Rated Output voltage(V): MMA:28V TIG:18V. Duty cycle(%): 60%. No-load loss(W): 40W. Housing protection grade: IP21S. Size: 9×14.4×5.2inch / 23X36.5X13.3cm Net Weight: 12.5lb / 5.65 KG. 1pcs x TIG Welder. 1pcs x High frequency Digtal Tig torch torch. 1pcs x Earth clamp. 1pcs x Electrode holder. 1pcs x Gas tube. Item Processing Time: The processing time for a specific order varies with the product type and stock status. All our item offer 7 days return peroid, defective or non-defective. Return must include all original package and accesorries, item must in good condition. If you have any issue, you can just give us a message, and we give you full resolve. Please be patient when contacting us, all messages will be replied within 24 hours. Please let us know immediately if a package is damaged upon arrival. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Welding & Soldering Equipment\Welding Equipment & Accessories\Welders, Cutters & Torches\TIG Welders”. The seller is “hitboxcity” and is located in this country: US. This item can be shipped to United States.
  • Brand: HITBOX
  • Models: Tig 200 PULSE
  • Rated Input Power (KVA): 7.0
  • ieff (Amps): 14.6
  • Rated Input Current (A): 20.0
  • Power factor: 0.7
  • Welding current range(A): 5-200
  • No-load voltage(V): 43
  • Efficiency: ≥85%
  • Protection class: IP21
  • Welding Process: Pulsed TIG
  • Polarity: DC
  • Item Type: Inverter Welder
  • Welded Material: Carbon steel, galvanized sheet, stainless steel
  • Warrantly: 2 Years

HITBOX TIG Welders Pulse 200AMP 110V/220V HF Inverter ARC TIG Welding Machine

HITBOX 110/220V 200A HF TIG Welder Inverter IGBT Electric MMA ARC TIG Welders

HITBOX 110/220V 200A HF TIG Welder Inverter IGBT Electric MMA ARC TIG Welders
HITBOX 110/220V 200A HF TIG Welder Inverter IGBT Electric MMA ARC TIG Welders
HITBOX 110/220V 200A HF TIG Welder Inverter IGBT Electric MMA ARC TIG Welders
HITBOX 110/220V 200A HF TIG Welder Inverter IGBT Electric MMA ARC TIG Welders
HITBOX 110/220V 200A HF TIG Welder Inverter IGBT Electric MMA ARC TIG Welders
HITBOX 110/220V 200A HF TIG Welder Inverter IGBT Electric MMA ARC TIG Welders
HITBOX 110/220V 200A HF TIG Welder Inverter IGBT Electric MMA ARC TIG Welders
HITBOX 110/220V 200A HF TIG Welder Inverter IGBT Electric MMA ARC TIG Welders

HITBOX 110/220V 200A HF TIG Welder Inverter IGBT Electric MMA ARC TIG Welders
60 days return period. Package weight: 8.75KG (19.30LB). Package size: 472242cm(18.508.6616.53in). Input Voltage(V): 110V/220V. Output Current Range(A) :10-200A. Rated working Voltage(V) :TIG:15.6V/ARC:25.6V. Duty Cycle(%): 60%. No-load Loss(W) :40W. Housing Protection Grade :IP21S. Base Material :Carbon, Stainless, Low-alloy steel Plate. Welding Process: TIG / ARC. Thickness(mm) :0.3-4.0mm carbon stainless, 1.5-6.0mm low-alloy steel. Electrode Diameter(mm) :ø1.6, ø2.5, ø3.2. Why should use HITBOX HBT2000 welder? 60% high duty cycle, superior output. HITBOX HBT2000 has really pleased me well with its performance. The welder has a great TIG option. Without any issues, I could TIG weld in a full roll cage, suspension parts, and many other projects. The ARC Stick option for this machine is also wonderful. It is really simple to start the arc. I welded stainless bar stock with 1/16 inch stainless rods and mild steel with 3/32 7013 rods and got a pleasing result. You will weld 5/16 inch maximum steel at full strength with the welder. The technology of the inverter allows it to achieve a frequency of up to 100 kHz, generating 25% more heat while welding. IGBT technology is another valuable technology in the HITBOX HBT2000 Welder. 2T & 4T Functions. 2T(Manual) / 4T(Semi-auto) switch is available, you can release your finger for long time welding job when on 4T. 2T is suitable for the re-tack welding, transient welding or thin plate welding. 4T is suitable for welding medium thickness plates. TIG welding thickness 0.3-5.0mm, application of Tungsten electrodes diameter: 1.0/1.6/2.0/2.4/3.0mm. Suitable for welding different metals such as steel, stainless steel, carbon steel etc. ARC welding thickness 1.5-6.0mm, application of electrodes diameter: 2.5/3.2mm. Having this welding machine in your garage would be a great addition to your daily work. What’s included with the package? 1X HBT2000 TIG Welder. 1X 4M (157inch) WP-17 tig torch. 1X Tig torch consumables. 2X Gas tube hoop. 1X 2M (79inch) earth clamp. 1X 3.1M (122inch) electrode holder. 1X Convert line convert plug from 110V to 220V. 1X User’s manual. This is a quality product at an affordable price. The hobbyists and beginners can have this machine in their garage without any confusion. We may not recommend it for heavy-duty welding given the price it comes at. It is therefore suitable for lightweight projects and start-ups. You may obtain the correct service whether you are a specialist who wants a welder for home or light work. Can I TIG aluminum with this machine? You can’t TIG weld aluminum with this machine as it is not an AC machine. If you want to Weld aluminum you can choose either HITBOX SYN-MIG200 PRO, it is MIG Weld aluminum. And to be specific about HITBOX models, we suggest that you look for the duty cycle, welding modes, gas, and electric option. But most importantly, make sure you pick the welder with IGBT inverter technology. Item Processing Time: The processing time for a specific order varies with the product type and stock status. 14 days Unconditional return. If you have any issue, you can just give us a message, and we give you full resolve. Please be patient when contacting us, all messages will be replied within 24 hours. Please let us know immediately if a package is damaged upon arrival. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Welding & Soldering Equipment\Welding Equipment & Accessories\Welders, Cutters & Torches\TIG Welders”. The seller is “usawelduk” and is located in this country: US. This item can be shipped to United States.
  • Featured Refinements: TIG Welder
  • Brand: HITBOX
  • Country/Region of Manufacture: China
  • Welding Process: TIG/ ARC
  • Arcing way: Transfer
  • Rated voltage(V): 220V/110V
  • Rated input current(A): MMA:27.3 TIG:16.8
  • No-load voltage(V): 50
  • Output current(A): 10-200
  • Rated output voltage(V): MMA:28V TIG:18V
  • No-load loss(W): 40
  • Duty cycle(%): 60%
  • Power factor: 0.73
  • Efficiency (%): 80
  • Protection class: IP21
  • Insulation Grade: F
  • Net Weight: 8.5KG
  • Electrode Diameter(mm): 2-3.2
  • Base Material: Carbon,Stainless,Low-alloy steel
  • Package Size: 375*155*240MM
  • Model: HBT2000
  • Item Type: Inverter Welder
  • Welded Material: Carbon steel, galvanized sheet, stainless steel
  • Polarity: DC
  • Color: Orange
  • Package weight: 8.5kg

HITBOX 110/220V 200A HF TIG Welder Inverter IGBT Electric MMA ARC TIG Welders

Dc Inverter Arc Welder 250a Mini Portable Welding Machine 220v Electric Welders

Dc Inverter Arc Welder 250a Mini Portable Welding Machine 220v Electric Welders
Dc Inverter Arc Welder 250a Mini Portable Welding Machine 220v Electric Welders
Dc Inverter Arc Welder 250a Mini Portable Welding Machine 220v Electric Welders
Dc Inverter Arc Welder 250a Mini Portable Welding Machine 220v Electric Welders
Dc Inverter Arc Welder 250a Mini Portable Welding Machine 220v Electric Welders
Dc Inverter Arc Welder 250a Mini Portable Welding Machine 220v Electric Welders
Dc Inverter Arc Welder 250a Mini Portable Welding Machine 220v Electric Welders
Dc Inverter Arc Welder 250a Mini Portable Welding Machine 220v Electric Welders

Dc Inverter Arc Welder 250a Mini Portable Welding Machine 220v Electric Welders
Dc Inverter Arc Welder 250a Mini Portable Welding Machine 220v Electric Welders. Item Specific: Certification: NONE. Rated Duty Cycle. Is Smart Device: No. Pilot Arc Current: 20-250A. Usage: Arc welding machine. Plug Type: EU plug. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Welding & Soldering Equipment\Welding Equipment & Accessories\Welders, Cutters & Torches\TIG Welders”. The seller is “lifeestore189″ and is located in this country: CN. This item can be shipped worldwide.
  • Features 2: Arc welding machine
  • Features 3: DC inverter arc welder
  • Features 4: Portable welding machine
  • Features 5: Arc Welders
  • Frequency: 50Hz
  • Country/Region of Manufacture: China
  • Item Type: Inverter Welder
  • Polarity: DC
  • Is Smart Device: No
  • Origin: CN(Origin)
  • Package Weight: 1.85kg
  • Pilot Arc Current: 20-250A
  • Plug Type: EU plug
  • Tips: Product does not include plug
  • Usage: Arc welding machine
  • Voltage: 220V
  • Brand: Unbranded
  • Model: 001
  • Arc Current: 20-250A
  • Certification: NONE
  • Dimensions: 220*95*135mm
  • Features 1: Arc welding

Dc Inverter Arc Welder 250a Mini Portable Welding Machine 220v Electric Welders

200AMP TIG Welders Pulse 110V/220V HF DC Inverter ARC Stick TIG Welding Machine

200AMP TIG Welders Pulse 110V/220V HF DC Inverter ARC Stick TIG Welding Machine
200AMP TIG Welders Pulse 110V/220V HF DC Inverter ARC Stick TIG Welding Machine
200AMP TIG Welders Pulse 110V/220V HF DC Inverter ARC Stick TIG Welding Machine
200AMP TIG Welders Pulse 110V/220V HF DC Inverter ARC Stick TIG Welding Machine
200AMP TIG Welders Pulse 110V/220V HF DC Inverter ARC Stick TIG Welding Machine
200AMP TIG Welders Pulse 110V/220V HF DC Inverter ARC Stick TIG Welding Machine
200AMP TIG Welders Pulse 110V/220V HF DC Inverter ARC Stick TIG Welding Machine
200AMP TIG Welders Pulse 110V/220V HF DC Inverter ARC Stick TIG Welding Machine
200AMP TIG Welders Pulse 110V/220V HF DC Inverter ARC Stick TIG Welding Machine
200AMP TIG Welders Pulse 110V/220V HF DC Inverter ARC Stick TIG Welding Machine
200AMP TIG Welders Pulse 110V/220V HF DC Inverter ARC Stick TIG Welding Machine

200AMP TIG Welders Pulse 110V/220V HF DC Inverter ARC Stick TIG Welding Machine
HITBOX TIG Welders Pulse 200AMP 110V/220V HF DC Inverter ARC Stick TIG Welding Machine. HITBOX 110V 220V Tig Welder Pulse 200A Dual Voltage Arc D/C Stick MMA Inverter IGBT Digital Welding Machine 60% Ducty Cycle High Frequency Digital Control. TIG PULSE FUNCTION – With tig pulse function, welding current will constantly changes from a high (peak) amperage down to a low (basic or background) current and back again automatically. This allows for welding thinner metals and high heat conductive metals without burning through. On thicker metals you can achieve tighter narrower more penetrating welds. ARC FUNCTION – This TIG200P welder can weld 1.5-12mm thickness board. It can use 2.5mm, 3.2mm and 4.0mm rods. Can weld 4.0mm rods for a long time. This welder comes with arc force, anti stick function. Easy to strike an arc, little spatter, stable current, and good performance. 4M DIGITAL TIG TORCH – There were four button on the tig torch. The function of them is switch on/ off HF, higher current, lower current and test gas. With this 4m long tig torch, you can do a far distance welding job. PULES TIG & TIG & MMA(ARC/STICK) 3 IN1 DC Inverter welder. Digital Control Front Panel enable to easily operate. IGBT technology inverter – Latest transistor technology more efficient so enables highest power and a duty cycle of 60% at full power. No transformer, no MOSFET, modern IGBT. Smooth arc and stable welding performance. DC TIG function for welding stainless steel, carbon steel, copper and non-ferrous metals except aluminium and aluminium alloys. PULES TIG function for particularly welding thin plate through regulating the parameters: basic current, pulse duty, pulse frequency. Start/End Current and regulating Upslope/Downslope time- prevents voids to improve the welding quality at the start and end of the welding. 2T, 4T MODES are available determines the control of the operating mode and provides extended control over the current flow. In 2T mode, high-frequency ignition (HF) remains active until the button on the torch is released. In 4T mode the arc is ignited after a single press and release of the button. After pressing and releasing again, the ignition is stopped. Upslope, Downslope time can be adjustable in the range 0 – 10s. Pre-flow and Post flow time can be adjustable in the range 0 – 15s (protects the tungsten electrode against excessive wear and protects the weld from oxidation). Pulse frequency can be adjustable in the range 0.2 – 200Hz. Pulse duty ratio can be adjustable in the range 10% – 90%. High Frequency Ignition – Easy ARC starting by non-contact ignition, improves tungsten life and ensures a much better welding result. 0 – 9 Channels memory button can save 10 groups previous TIG welding parameters. MMA welding with Auto hot-start, ARC Force and Anti-stick technology. Usable electrode 1.6 – 4.0mm on MMA welding mode. Compact portable design and light weight. Rated voltage: 110V /220V. Rated input current(A): MMA:43.6A TIG:28A. No-load voltage(V): 59V. Output current(A): 30-200A. Rated Output voltage(V): MMA:28V TIG:18V. Duty cycle(%): 60%. No-load loss(W): 40W. Housing protection grade: IP21S. 1pcs x TIG Welder. 1pcs x High frequency Tig torch torch. 1pcs x Earth clamp. 1pcs x Electrode holder. 1pcs x Gas tube. 1pcs x 110V 220V cable adapter. Item Processing Time: The processing time for a specific order varies with the product type and stock status. All our item offer 7 days return peroid, defective or non-defective. Return must include all original package and accesorries, item must in good condition. If you have any issue, you can just give us a message, and we give you full resolve. Please be patient when contacting us, all messages will be replied within 24 hours. Please let us know immediately if a package is damaged upon arrival. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Welding & Soldering Equipment\Welding Equipment & Accessories\Welders, Cutters & Torches\TIG Welders”. The seller is “hitboxcity” and is located in this country: US. This item can be shipped to United States.
  • Brand: HITBOX
  • Models: Tig 200 PULSE
  • Rated Input Power (KVA): 7.0
  • ieff (Amps): 14.6
  • Rated Input Current (A): 20.0
  • Power factor: 0.7
  • Welding current range(A): 5-200
  • No-load voltage(V): 43
  • Efficiency: ≥85%
  • Protection class: IP21
  • Welding Process: Pulsed TIG
  • Polarity: DC
  • Item Type: Inverter Welder
  • Welded Material: Carbon steel, galvanized sheet, stainless steel
  • Warrantly: 2 Years

200AMP TIG Welders Pulse 110V/220V HF DC Inverter ARC Stick TIG Welding Machine

HITBOX 110V/220V TIG Welders Pulse 200AMP HF Inverter ARC TIG Welding Machine

HITBOX 110V/220V TIG Welders Pulse 200AMP HF Inverter ARC TIG Welding Machine
HITBOX 110V/220V TIG Welders Pulse 200AMP HF Inverter ARC TIG Welding Machine
HITBOX 110V/220V TIG Welders Pulse 200AMP HF Inverter ARC TIG Welding Machine
HITBOX 110V/220V TIG Welders Pulse 200AMP HF Inverter ARC TIG Welding Machine
HITBOX 110V/220V TIG Welders Pulse 200AMP HF Inverter ARC TIG Welding Machine
HITBOX 110V/220V TIG Welders Pulse 200AMP HF Inverter ARC TIG Welding Machine
HITBOX 110V/220V TIG Welders Pulse 200AMP HF Inverter ARC TIG Welding Machine
HITBOX 110V/220V TIG Welders Pulse 200AMP HF Inverter ARC TIG Welding Machine
HITBOX 110V/220V TIG Welders Pulse 200AMP HF Inverter ARC TIG Welding Machine
HITBOX 110V/220V TIG Welders Pulse 200AMP HF Inverter ARC TIG Welding Machine
HITBOX 110V/220V TIG Welders Pulse 200AMP HF Inverter ARC TIG Welding Machine

HITBOX 110V/220V TIG Welders Pulse 200AMP HF Inverter ARC TIG Welding Machine
HITBOX TIG Welders Pulse 200AMP 110V/220V HF Inverter ARC TIG Welding Machine. HITBOX 110V/220V Tig Welder Pulse 200A Dual Voltage Arc D/C Stick MMA Inverter IGBT Digital Welding Machine 60% Ducty Cycle High Frequency Digital Control. TIG PULSE FUNCTION – With tig pulse function, welding current will constantly changes from a high (peak) amperage down to a low (basic or background) current and back again automatically. This allows for welding thinner metals and high heat conductive metals without burning through. On thicker metals you can achieve tighter narrower more penetrating welds. ARC FUNCTION – This TIG200P welder can weld 1.5-12mm thickness board. It can use 2.5mm, 3.2mm and 4.0mm rods. Can weld 4.0mm rods for a long time. This welder comes with arc force, anti stick function. Easy to strike an arc, little spatter, stable current, and good performance. 4M DIGITAL TIG TORCH – There were four button on the tig torch. The function of them is switch on/ off HF, higher current, lower current and test gas. With this 4m long tig torch, you can do a far distance welding job. PULES TIG & TIG & MMA(ARC/STICK) 3 IN1 DC Inverter welder. Digital Control Front Panel enable to easily operate. IGBT technology inverter – Latest transistor technology more efficient so enables highest power and a duty cycle of 60% at full power. No transformer, no MOSFET, modern IGBT. Smooth arc and stable welding performance. DC TIG function for welding stainless steel, carbon steel, copper and non-ferrous metals except aluminium and aluminium alloys. PULES TIG function for particularly welding thin plate through regulating the parameters: basic current, pulse duty, pulse frequency. Start/End Current and regulating Upslope/Downslope time- prevents voids to improve the welding quality at the start and end of the welding. 2T, 4T MODES are available determines the control of the operating mode and provides extended control over the current flow. In 2T mode, high-frequency ignition (HF) remains active until the button on the torch is released. In 4T mode the arc is ignited after a single press and release of the button. After pressing and releasing again, the ignition is stopped. Upslope, Downslope time can be adjustable in the range 0 – 10s. Pre-flow and Post flow time can be adjustable in the range 0 – 15s (protects the tungsten electrode against excessive wear and protects the weld from oxidation). Pulse frequency can be adjustable in the range 0.2 – 200Hz. Pulse duty ratio can be adjustable in the range 10% – 90%. High Frequency Ignition – Easy ARC starting by non-contact ignition, improves tungsten life and ensures a much better welding result. 0 – 9 Channels memory button can save 10 groups previous TIG welding parameters. MMA welding with Auto hot-start, ARC Force and Anti-stick technology. Usable electrode 1.6 – 4.0mm on MMA welding mode. Compact portable design and light weight. Rated voltage(V): 110V/220V. Rated input current(A): MMA:43.6A TIG:28A. No-load voltage(V): 59V. Output current(A): 30-200A. Rated Output voltage(V): MMA:28V TIG:18V. Duty cycle(%): 60%. No-load loss(W): 40W. Housing protection grade: IP21S. Size: 462140cm(18.118.2615.74in). Weight: 10.05KG (22LB). 1pcs x TIG Welder. 1pcs x Digtal High frequency Tig torch torch. 1pcs x Earth clamp. 1pcs x Electrode holder. 1pcs x Gas tube. 1pcs 110V 220V Cable adapter. Item Processing Time: The processing time for a specific order varies with the product type and stock status. All our item offer 7 days return peroid, defective or non-defective. Return must include all original package and accesorries, item must in good condition. If you have any issue, you can just give us a message, and we give you full resolve. Please be patient when contacting us, all messages will be replied within 24 hours. Please let us know immediately if a package is damaged upon arrival. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Welding & Soldering Equipment\Welding Equipment & Accessories\Welders, Cutters & Torches\TIG Welders”. The seller is “hitboxcity” and is located in this country: US. This item can be shipped to United States.
  • Brand: HITBOX
  • Models: Tig 200 DC PULSE
  • Input power: 110V/220V
  • Rated Input Power (KVA): 7.0
  • ieff (Amps): 14.6
  • Rated Input Current (A): 20.0
  • Power factor: 0.7
  • Welding current range(A): 5-200
  • No-load voltage(V): 43
  • Efficiency: ≥85%
  • Protection class: IP21
  • Welding Process: Pulsed TIG
  • Polarity: DC
  • Item Type: Inverter Welder
  • Welded Material: Carbon steel, galvanized sheet, stainless steel
  • Warrantly: 2 Years

HITBOX 110V/220V TIG Welders Pulse 200AMP HF Inverter ARC TIG Welding Machine

TIG Welders Pulse Dual Volt 110V/220V 200AMP Inverter HF ARC TIG Welding Machine

TIG Welders Pulse Dual Volt 110V/220V 200AMP Inverter HF ARC TIG Welding Machine
TIG Welders Pulse Dual Volt 110V/220V 200AMP Inverter HF ARC TIG Welding Machine
TIG Welders Pulse Dual Volt 110V/220V 200AMP Inverter HF ARC TIG Welding Machine
TIG Welders Pulse Dual Volt 110V/220V 200AMP Inverter HF ARC TIG Welding Machine
TIG Welders Pulse Dual Volt 110V/220V 200AMP Inverter HF ARC TIG Welding Machine
TIG Welders Pulse Dual Volt 110V/220V 200AMP Inverter HF ARC TIG Welding Machine
TIG Welders Pulse Dual Volt 110V/220V 200AMP Inverter HF ARC TIG Welding Machine
TIG Welders Pulse Dual Volt 110V/220V 200AMP Inverter HF ARC TIG Welding Machine
TIG Welders Pulse Dual Volt 110V/220V 200AMP Inverter HF ARC TIG Welding Machine
TIG Welders Pulse Dual Volt 110V/220V 200AMP Inverter HF ARC TIG Welding Machine
TIG Welders Pulse Dual Volt 110V/220V 200AMP Inverter HF ARC TIG Welding Machine
TIG Welders Pulse Dual Volt 110V/220V 200AMP Inverter HF ARC TIG Welding Machine

TIG Welders Pulse Dual Volt 110V/220V 200AMP Inverter HF ARC TIG Welding Machine
HITBOX TIG Welders Pulse Dual Volt 110V/220V 200AMP Inverter HF ARC TIG Welding Machine. HITBOX 110V 220V Tig Welder Pulse 200A Dual Voltage Arc D/C Stick MMA Inverter IGBT Digital Welding Machine 60% Ducty Cycle High Frequency Digital Control. TIG PULSE FUNCTION – With tig pulse function, welding current will constantly changes from a high (peak) amperage down to a low (basic or background) current and back again automatically. This allows for welding thinner metals and high heat conductive metals without burning through. On thicker metals you can achieve tighter narrower more penetrating welds. ARC FUNCTION – This TIG200P welder can weld 1.5-12mm thickness board. It can use 2.5mm, 3.2mm and 4.0mm rods. Can weld 4.0mm rods for a long time. This welder comes with arc force, anti stick function. Easy to strike an arc, little spatter, stable current, and good performance. 4M DIGITAL TIG TORCH – There were four button on the tig torch. The function of them is switch on/ off HF, higher current, lower current and test gas. With this 4m long tig torch, you can do a far distance welding job. PULES TIG & TIG & MMA(ARC/STICK) 3 IN1 DC Inverter welder. Digital Control Front Panel enable to easily operate. IGBT technology inverter – Latest transistor technology more efficient so enables highest power and a duty cycle of 60% at full power. No transformer, no MOSFET, modern IGBT. Smooth arc and stable welding performance. DC TIG function for welding stainless steel, carbon steel, copper and non-ferrous metals except aluminium and aluminium alloys. PULES TIG function for particularly welding thin plate through regulating the parameters: basic current, pulse duty, pulse frequency. Start/End Current and regulating Upslope/Downslope time- prevents voids to improve the welding quality at the start and end of the welding. 2T, 4T MODES are available determines the control of the operating mode and provides extended control over the current flow. In 2T mode, high-frequency ignition (HF) remains active until the button on the torch is released. In 4T mode the arc is ignited after a single press and release of the button. After pressing and releasing again, the ignition is stopped. Upslope, Downslope time can be adjustable in the range 0 – 10s. Pre-flow and Post flow time can be adjustable in the range 0 – 15s (protects the tungsten electrode against excessive wear and protects the weld from oxidation). Pulse frequency can be adjustable in the range 0.2 – 200Hz. Pulse duty ratio can be adjustable in the range 10% – 90%. High Frequency Ignition – Easy ARC starting by non-contact ignition, improves tungsten life and ensures a much better welding result. 0 – 9 Channels memory button can save 10 groups previous TIG welding parameters. MMA welding with Auto hot-start, ARC Force and Anti-stick technology. Usable electrode 1.6 – 4.0mm on MMA welding mode. Compact portable design and light weight. Rated voltage: 110V /220V. Rated input current(A): MMA:43.6A TIG:28A. No-load voltage(V): 59V. Output current(A): 30-200A. Rated Output voltage(V): MMA:28V TIG:18V. Duty cycle(%): 60%. No-load loss(W): 40W. Housing protection grade: IP21S. 1pcs x TIG Welder. 1pcs x Digtal Tig torch. 1pcs x Earth Clamp. 1pcs x Electrode Holder. 1pcs x Gas Tube. 1pcs x 110V-220V Adapter. Item Processing Time: The processing time for a specific order varies with the product type and stock status. All our item offer 7 days return peroid, defective or non-defective. Return must include all original package and accesorries, item must in good condition. If you have any issue, you can just give us a message, and we give you full resolve. Please be patient when contacting us, all messages will be replied within 24 hours. Please let us know immediately if a package is damaged upon arrival. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Welding & Soldering Equipment\Welding Equipment & Accessories\Welders, Cutters & Torches\TIG Welders”. The seller is “hitboxstore” and is located in this country: US. This item can be shipped to United States.
  • Brand: HITBOX
  • Models: Tig 200 DC PULSE
  • Rated Input Power (KVA): 7.0
  • ieff (Amps): 14.6
  • Rated Input Current (A): 20.0
  • Power factor: 0.7
  • Welding current range(A): 5-200
  • No-load voltage(V): 43
  • Efficiency: ≥85%
  • Protection class: IP21
  • Welding Process: Pulsed TIG
  • Polarity: DC
  • Item Type: Inverter Welder
  • Welded Material: Carbon steel, galvanized sheet, stainless steel
  • Weight: 10.05KG (22LB)
  • Size: 46*21*40cm(18.11*8.26*15.74in)

TIG Welders Pulse Dual Volt 110V/220V 200AMP Inverter HF ARC TIG Welding Machine

TIG Welder 110V 220V 200A ARC Welders High Frequency ARC TIG Welding Machine

TIG Welder 110V 220V 200A ARC Welders High Frequency ARC TIG Welding Machine
TIG Welder 110V 220V 200A ARC Welders High Frequency ARC TIG Welding Machine
TIG Welder 110V 220V 200A ARC Welders High Frequency ARC TIG Welding Machine
TIG Welder 110V 220V 200A ARC Welders High Frequency ARC TIG Welding Machine
TIG Welder 110V 220V 200A ARC Welders High Frequency ARC TIG Welding Machine
TIG Welder 110V 220V 200A ARC Welders High Frequency ARC TIG Welding Machine
TIG Welder 110V 220V 200A ARC Welders High Frequency ARC TIG Welding Machine
TIG Welder 110V 220V 200A ARC Welders High Frequency ARC TIG Welding Machine
TIG Welder 110V 220V 200A ARC Welders High Frequency ARC TIG Welding Machine
TIG Welder 110V 220V 200A ARC Welders High Frequency ARC TIG Welding Machine
TIG Welder 110V 220V 200A ARC Welders High Frequency ARC TIG Welding Machine
TIG Welder 110V 220V 200A ARC Welders High Frequency ARC TIG Welding Machine

TIG Welder 110V 220V 200A ARC Welders High Frequency ARC TIG Welding Machine
You may also like. TIG Welder 110V 220V ARC Stick Welders High Frequency ARC TIG Welding Machine. HITBOX HBT2000 TIG Welders LED Display MMA TIG ARC Welding Machine 200AMP 110/220V IGBT with Electrode Holder Earth Clamp Tig Gun. Our welding machine, which is made of high-quality panel as well as delicate treatment, integrates comfortable grip, easy operation and high precision, and is popularly applied in various applications in daily life, particularly suitable for low carbon steel, stainless steel, alloy steel etc. Uses imported IGBT and fast recovery diodes as main electric components. It is supplemented by a specially developed main PCB board. In addition, the uniform regulation of welding current has been designed to guarantee the arc reach good welding process adaptability. What’s more, its perfect dynamic protection features ensure that it is safe and reliable when use. Besides, there are almost all necessary accessories included in this kit for convenient operation. Brand new and high quality. Appearance design patent, Digital LED display when use, Featuring controlling knob, start with VRD, With gas delay adjustment function knoband 2T 4T function. Adopts IGBT module technology, energy-saving and stable heat dissipation. 4.60% high duty cycle, lower cost operation, superior output. Convenient quick connection for the output makes it quick, safe, simple and stable. Hot striking ARC current is adjustable, greatly improve the ARC-starting function. Start ARC easily, stable welding ARC, anti-stick, deep weld pool and beautiful welding shape. Efficient air-ejection and heat-ejection technology. Over-heating protection, over-voltage protection, over-current protection. Adopt newly IGBT inverter technology, Compared to MOS Technology, greatly reduce breakdown. Inverter frequency up to 100KHZ, the technology is mature, stable performance. TIG Welding thickness 0.3-5.0mm, and application of electrode diameter (MM): 2–3.2mm. Easy arc ignition, litter spattering, stable current and good shaping. Weight: About 9.5kg. Input Voltage(V) : 110V/220V. No-load Voltage(V) : 114v. Output Current Range(A) :10-200A. Rated working Voltage(V) :TIG:15.6V/ARC:25.6V. Duty Cycle(%) :60%. No-load Loss(W) :40W. Power Factor :0.73. Housing Protection Grade :IP21S. Base Material :Carbon, Stainless, Low-alloy steel Plate. Thickness(mm) :0.3-6.0mm. Welding Process :TIG / ARC. Electrode Diameter(mm) :2-3.2mm. 1Pcs TIG 200A welder. 1Pcs high frequency Tig torch. 1Pcs Electrode holder+ Cable. 1Pcs Earth clamp+ Cable. 1Pcs 110v 200v Adapter. Item Processing Time: The processing time for a specific order varies with the product type and stock status. All our item offer 7 days return peroid, defective or non-defective. Return must include all original package and accesorries, item must in good condition. If you have any issue, you can just give us a message, and we give you full resolve. Please be patient when contacting us, all messages will be replied within 24 hours. Please let us know immediately if a package is damaged upon arrival. The item “TIG Welder 110V 220V 200A ARC Welders High Frequency ARC TIG Welding Machine” is in sale since Wednesday, November 20, 2019. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Welding & Soldering Equipment\Welding Equipment & Accessories\Welders, Cutters & Torches\TIG Welders”. The seller is “hitboxstore” and is located in Chino, California. This item can be shipped to United States.
  • Featured Refinements: Arc Welder
  • Brand: HITBOX
  • MPN: Does Not Apply
  • Country/Region of Manufacture: China
  • Welding Process: TIG/ ARC
  • Arcing way: Transfer
  • Rated voltage(V): 1phase AC240V
  • Rated input current(A): MMA:43.6 TIG:28
  • No-load voltage(V): 50
  • Output current(A): 10-200
  • Rated output voltage(V): MMA:28V TIG:18V
  • No-load loss(W): 40
  • Duty cycle(%): 60%
  • Power factor: 0.73
  • Efficiency (%): 80
  • Protection class: IP21
  • Insulation Grade: F
  • Net Weight: 16.5 lb /7kg
  • Plate Thickness(mm): 0.3-6.0
  • Electrode Diameter(mm): 2-3.2
  • Base Material: Carbon,Stainless,Low-alloy steel
  • Package Size: 18* 11*14 in (440*260*340mm)
  • Model: HBT2000
  • Warrantly: 2 years
  • Polarity: DC
  • Item Type: Inverter Welder
  • Welded Material: Stainless Steel

TIG Welder 110V 220V 200A ARC Welders High Frequency ARC TIG Welding Machine