Welding functions: Support for MIG gas, MIG mix, Flux cored/MIG gasless, Lift TIG, MMA. Clear display: The new digital LED panel display shows every detail of the weld clearly. Easy adjustment: easy switching of welding modes and adjustment of welding parameters. Automatic wire feed function: quickly feeds the wire out of the gun, even to inaccessible interiors. Inductance adjustment: adjusts the softness of the arc, reduces spatter/deepens the fusion pool. Multiple upgrade functions: 2T/4T welding mode, inductance adjustment, voltage adjustment. HITBOX 4 in 1 Aluminum MIG Welder 110V 220V Gas/Gasless 250Amp TIG MMA Welding Machine. Why you choose MIG250? Synergic Control MIG Function : allows the automatic change of the voltage & wire feeding speed by adjusting the amperage or choosing different thicknesses. It will match the welding chart set in the data. Making it extremely easy for your welding works. MMA/ARC Stick : Hot start function make the arc ignition in MMA welding easier and avoid adhesion. The arc force up to 200A current obviously improve the performance of the machine in long-cable welding. Ability to use up to 165 feet (50 meters) leads without any power loss at the weld. Safety : Automatic VRD Protection Function for Over-current, Over-voltage and Over-heating. The fan with automatic temperature control makes the machine run very quietly. Perfect choice for light to medium duty welding jobs whether in your garage, at home or at your local auto body shop. Synergic setting: The wire feed speed and current will be auto fitted by input voltage. Manual setting: The wire feed speed and current can adjust by welding data. Digital Screen:The voltage and current are displayed in the panel. Can be used with MIG gun with graphite wire feed tube for aluminum function. Up to 250 A output that allows to weld mild steel up to 9/32 in plate. Certificated by ETL: Intelligent protection includes over-voltage, over-current, over-heat protection. 2T/4T Operation (2 steps or 4 steps of welding) and inductance(soft to hard on arc sparking)Compatible with WP-17V 35-50 (not included inside product). Non noise: built with thermal original chip, the fan will not start until the temperature gets high. 2 Wire feed Rolls included. U type wire roll is used for aluminum welding wire. V type wire roll is used for solid welding wire. Note: The tig torch is not included. HIXBOX MIG250II MIG Welder 4 ways weld effect. Welding current rangeMMAA(A). Welding current rangeTIG(A). Welding voltage range(MIG)(A). Built-in hot start, arc-force, anti-stick and VRD. Wire feed speed range(m/min). 1.6 – 4.0 (1.6-4.0mm rod) 6013 can be used Very good, also 70180.6/0.8/0.9/10. 1x Graphite wire tube. 1x 110v to 220v Adaptor. MIG250 Welder Support 5kg/11 lb of welding wire. Item Processing Time: The processing time for a specific order varies with the product type and stock status. All our item offer 7 days return peroid, defective or non-defective. Return must include all original package and accesorries, item must in good condition. If you have any issue, you can just give us a message, and we give you full resolve. Please be patient when contacting us, all messages will be replied within 24 hours. Please let us know immediately if a package is damaged upon arrival.
