Day: September 18, 2021

DC Pulsed 250A 220V TIG/Stick/Arc Welding Machine/Welder with HF Start

Posted on by admin
DC Pulsed 250A 220V TIG/Stick/Arc Welding Machine/Welder with HF Start
DC Pulsed 250A 220V TIG/Stick/Arc Welding Machine/Welder with HF Start
DC Pulsed 250A 220V TIG/Stick/Arc Welding Machine/Welder with HF Start
DC Pulsed 250A 220V TIG/Stick/Arc Welding Machine/Welder with HF Start

DC Pulsed 250A 220V TIG/Stick/Arc Welding Machine/Welder with HF Start
DC Pulsed 250A 220V TIG/Stick/Arc Welding Machine/Welder with HF Start. This is a digital inverter DC pulse TIG welding machine with great function, excellent performance, and advanced technology. It has various welding functions such as SMAW, DC TIG, pulsed TIG and TIG spot welding (DC or pulsed), etc. And it can be widely used in fine welding of various metals. This welder could not work for aluminum welding. Digital Control Pulse Frequency allows full parameter setting of Peak Current, Base Current, Pulse Frequency and Pulse Width, allowing to manipulate the heat input to the work, control penetration and minimize distortion. Digital Set of Pre Flow Time, Start Current Level, Up Slope Time, Down Slope Time, Finish Current Level, and Post Flow Time combined with the choice of 2 or 4T trigger function allows you to control the start and finish of the weld process at the highest professional level. Arc ignition time, preset current, and arc force current are adjustable. Overcurrent & overheat is available for this machine. DC TIG, Pulsed TIG, and MMA are available. The HF arc ignition provides pre gas and instant arc ignition with the press of the torch. Switch leaving no tungsten inclusion and no contamination of the tungsten electrode. MMA welding performance is significantly improved with an excellent control algorithm: easier to ignite arc, stable welding current, little spatter, no electrode sticking, good shaping, and automatically adaptable to the change of length or section of welding cable. Spot welding functions are available. Remote control available (customized). The machine offers two remote control modes, namely torch control mode and foot control mode, which can meet different application requirements of users. TIG-250P TIG Welding Machine. WP-26 TIG Torch 13ft. Electrode Holder 10 ft. Earth Clamp 10 ft. Additional TIG Accessories: 3 Collets, 1 Collet Body, 3 Alumina Ceramic Cup, 1 Long Back Cap, 1 Short Back Cap. Please make sure it is correct. The item “DC Pulsed 250A 220V TIG/Stick/Arc Welding Machine/Welder with HF Start” is in sale since Sunday, August 1, 2021. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Welding & Soldering Equipment\Welding Equipment & Accessories\Welders, Cutters & Torches\TIG Welders”. The seller is “weld_mart” and is located in Walton, Kentucky. This item can be shipped to United States.
  • Brand: YesWelder
  • MPN: Does Not Apply
  • Item Type: Inverter Welder
  • Welding Process: Pulsed TIG

DC Pulsed 250A 220V TIG/Stick/Arc Welding Machine/Welder with HF Start

Amico ARC-200, 5-200 Amp Stick Arc TIG Welder, 100-250V Welding, 80% Duty Cycle

Posted on by admin
Amico ARC-200, 5-200 Amp Stick Arc TIG Welder, 100-250V Welding, 80% Duty Cycle
Amico ARC-200, 5-200 Amp Stick Arc TIG Welder, 100-250V Welding, 80% Duty Cycle
Amico ARC-200, 5-200 Amp Stick Arc TIG Welder, 100-250V Welding, 80% Duty Cycle
Amico ARC-200, 5-200 Amp Stick Arc TIG Welder, 100-250V Welding, 80% Duty Cycle
Amico ARC-200, 5-200 Amp Stick Arc TIG Welder, 100-250V Welding, 80% Duty Cycle
Amico ARC-200, 5-200 Amp Stick Arc TIG Welder, 100-250V Welding, 80% Duty Cycle

Amico ARC-200, 5-200 Amp Stick Arc TIG Welder, 100-250V Welding, 80% Duty Cycle
ARC-200 is a professional Stick Arc with Lift-TIG welding machine using the advanced inverter technology. The welding power source can provide a stronger, more concentrated and more stable arc. When the stick and work-piece become shorter, the response will be faster. This means it is easier to design it as a welding machine with different dynamic characteristics, and it can even be adjusted as needed to make the arc softer or harder. Is a professional Stick Arc and Lift-TIG combo welding machine with an industrial level design. Compatible with all electrodes. E6010, E6011, E6013, E7014, E7018, etc. The machine has an. Excellent Lift-TIG arc welding function; 5-200A. Comfortably welds thin stainless steel and other various metals. Automatic selection feature detects input voltage automatically, allowing you to easily switch between 100250V/5060Hz input power. Almost all of the voltages and frequencies can be used. Adjustable arc force settings allow you to meet your custom welding needs. Incorporates advanced IGBT inverter technology with superior arc characteristics and has excellent arc stability. 80% duty cycle at 200 amps ensures long time welding and the machine can still work normally with an extended power cord up to 700 feet. The power cord can resist power fluctuations and cable attenuation at any length. ARC-200 has very powerful functions, making it easy to start and use. The machine has a built-in hot start function, anti-stick function, thrust adjustment function, current-intensity control function, and automatic compensation for voltage fluctuations: over-voltage protection, under-voltage protection, over-current protection, and over-load protection. ARC-200 Stick Arc with Lift-TIG can achieve the perfect weld. It is a welding machine of the highest level; the strength of its components makes it a reliable work tool for professionals or individuals. Package includes 7 feet of power cord, 10 feet of 300-Amp electrode holder assembly, 10 feet of 300-Amp grounding clamp assembly, and a 230V to 115V power adapter. Rated Input Voltage: AC 100V250V. Frequency: 50Hz & 60Hz. Rated Input Power: 230V/8.2KVA/35.7A & 115V/5.8KVA/50A. Current Range: 230V/ 5-200A & 115V/ 5-145A. Force Current: 0-50 Amp & 0-10 Amp. Nominal DC Open Circuit Voltage: 85-Volt. & 115V/ 1/16 5/32 in. Power Factor: 0.93. Dimension: 14.1 x 6.2 x 11.3 in. Net Weight: 15.0 lbs. Packaging Size: 17.9 x 9.5 x 12.4 in. Packaging Weight: 20.0 lbs. Stick Arc Welding Machine. 7-feet Power Cord & 6-50P Plug (on the machine). 230V to 115V Power Adapter. 300A Electrode Holder, 10-feet Cable, 35-50mm Connect. 300A Work Clamp, 10-feet Cable, 35-50mm Connect. The item “Amico ARC-200, 5-200 Amp Stick Arc TIG Welder, 100-250V Welding, 80% Duty Cycle” is in sale since Thursday, September 9, 2021. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Welding & Soldering Equipment\Welding Equipment & Accessories\Welders, Cutters & Torches\TIG Welders”. The seller is “deana11825″ and is located in Baldwin Park, California. This item can be shipped to United States.
  • Item Type: Inverter Welder
  • Welding Process: TIG
  • Polarity: DC
  • Welding current: 5~200 Amp
  • Model: ARC-200
  • Duty cycle: 80% Duty Cycle @ 200 Amp
  • Power Source: 100~250V / 50~60Hz
  • Welded Material: Stainless Steel, Alloy Steel, Mild Steel, Steel
  • MPN: BY2002020
  • Brand: Amico Electric

Amico ARC-200, 5-200 Amp Stick Arc TIG Welder, 100-250V Welding, 80% Duty Cycle