HITBOX TIG Welders Pulse Dual Volt 110V/220V 200AMP Inverter HF ARC TIG Welding Machine. HITBOX 110V 220V Tig Welder Pulse 200A Dual Voltage Arc D/C Stick MMA Inverter IGBT Digital Welding Machine 60% Ducty Cycle High Frequency Digital Control. TIG PULSE FUNCTION – With tig pulse function, welding current will constantly changes from a high (peak) amperage down to a low (basic or background) current and back again automatically. This allows for welding thinner metals and high heat conductive metals without burning through. On thicker metals you can achieve tighter narrower more penetrating welds. ARC FUNCTION – This TIG200P welder can weld 1.5-12mm thickness board. It can use 2.5mm, 3.2mm and 4.0mm rods. Can weld 4.0mm rods for a long time. This welder comes with arc force, anti stick function. Easy to strike an arc, little spatter, stable current, and good performance. 4M DIGITAL TIG TORCH – There were four button on the tig torch. The function of them is switch on/ off HF, higher current, lower current and test gas. With this 4m long tig torch, you can do a far distance welding job. PULES TIG & TIG & MMA(ARC/STICK) 3 IN1 DC Inverter welder. Digital Control Front Panel enable to easily operate. IGBT technology inverter – Latest transistor technology more efficient so enables highest power and a duty cycle of 60% at full power. No transformer, no MOSFET, modern IGBT. Smooth arc and stable welding performance. DC TIG function for welding stainless steel, carbon steel, copper and non-ferrous metals except aluminium and aluminium alloys. PULES TIG function for particularly welding thin plate through regulating the parameters: basic current, pulse duty, pulse frequency. Start/End Current and regulating Upslope/Downslope time- prevents voids to improve the welding quality at the start and end of the welding. 2T, 4T MODES are available determines the control of the operating mode and provides extended control over the current flow. In 2T mode, high-frequency ignition (HF) remains active until the button on the torch is released. In 4T mode the arc is ignited after a single press and release of the button. After pressing and releasing again, the ignition is stopped. Upslope, Downslope time can be adjustable in the range 0 – 10s. Pre-flow and Post flow time can be adjustable in the range 0 – 15s (protects the tungsten electrode against excessive wear and protects the weld from oxidation). Pulse frequency can be adjustable in the range 0.2 – 200Hz. Pulse duty ratio can be adjustable in the range 10% – 90%. High Frequency Ignition – Easy ARC starting by non-contact ignition, improves tungsten life and ensures a much better welding result. 0 – 9 Channels memory button can save 10 groups previous TIG welding parameters. MMA welding with Auto hot-start, ARC Force and Anti-stick technology. Usable electrode 1.6 – 4.0mm on MMA welding mode. Compact portable design and light weight. Rated voltage: 110V /220V. Rated input current(A): MMA:43.6A TIG:28A. No-load voltage(V): 59V. Output current(A): 30-200A. Rated Output voltage(V): MMA:28V TIG:18V. Duty cycle(%): 60%. No-load loss(W): 40W. Housing protection grade: IP21S. 1pcs x TIG Welder. 1pcs x Digtal Tig torch. 1pcs x Earth Clamp. 1pcs x Electrode Holder. 1pcs x Gas Tube. 1pcs x 110V-220V Adapter. Item Processing Time: The processing time for a specific order varies with the product type and stock status. All our item offer 7 days return peroid, defective or non-defective. Return must include all original package and accesorries, item must in good condition. If you have any issue, you can just give us a message, and we give you full resolve. Please be patient when contacting us, all messages will be replied within 24 hours. Please let us know immediately if a package is damaged upon arrival. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Welding & Soldering Equipment\Welding Equipment & Accessories\Welders, Cutters & Torches\TIG Welders”. The seller is “hitboxstore” and is located in this country: US. This item can be shipped to United States.
- Brand: HITBOX
- Models: Tig 200 DC PULSE
- Rated Input Power (KVA): 7.0
- ieff (Amps): 14.6
- Rated Input Current (A): 20.0
- Power factor: 0.7
- Welding current range（A）: 5-200
- No-load voltage(V): 43
- Efficiency: ≥85％
- Protection class: IP21
- Welding Process: Pulsed TIG
- Polarity: DC
- Item Type: Inverter Welder
- Welded Material: Carbon steel, galvanized sheet, stainless steel
- Weight: 10.05KG (22LB)
- Size: 46*21*40cm(18.11*8.26*15.74in)
