Vector Wig Schweißgerät AC/DC WIG O251 Puls Inverter Mit plasma ALU TIG ARC MMA

Vector Wig Schweißgerät AC/DC WIG O251 Puls Inverter Mit plasma ALU TIG ARC MMA
Vector Wig Schweißgerät AC/DC WIG O251 Puls Inverter Mit plasma ALU TIG ARC MMA
Vector Wig Schweißgerät AC/DC WIG O251 Puls Inverter Mit plasma ALU TIG ARC MMA
Vector Wig Schweißgerät AC/DC WIG O251 Puls Inverter Mit plasma ALU TIG ARC MMA
Vector Wig Schweißgerät AC/DC WIG O251 Puls Inverter Mit plasma ALU TIG ARC MMA
Vector Wig Schweißgerät AC/DC WIG O251 Puls Inverter Mit plasma ALU TIG ARC MMA
Vector Wig Schweißgerät AC/DC WIG O251 Puls Inverter Mit plasma ALU TIG ARC MMA
Vector Wig Schweißgerät AC/DC WIG O251 Puls Inverter Mit plasma ALU TIG ARC MMA
Vector Wig Schweißgerät AC/DC WIG O251 Puls Inverter Mit plasma ALU TIG ARC MMA
Vector Wig Schweißgerät AC/DC WIG O251 Puls Inverter Mit plasma ALU TIG ARC MMA

Vector Wig Schweißgerät AC/DC WIG O251 Puls Inverter Mit plasma ALU TIG ARC MMA
Industrielle Anwendungen: Metallverarbeitung Werften und Offshore-Industrie Instandhaltung und Reparatur Rohrschweißen draußen Karosserie. Verarbeitung : DC WIG (GTAW) AC WIG (GTAW) Stab (MMA) Plasmaschneiden. Für WIG- und Stabschweißen. Eine Komplettlösung aus präzisen AC / DC WIG PLUS Schweiß- und Plasmaschneidmaschine. O251 Der auf dem Mastertig System basierende O251 bietet ein präzises, fachmännisches AC / DC WIG-Schweißverfahren. Es ist ein präziser Aluminiumschweißspezialist, der zu allen geschweißten Materialien passt. Alles was Sie für Metallschweißen oder -schneiden benötigen, erhalten Sie mit dieser Kombi-Maschine und es ist alles, was Sie für WIG- und Stabschweißen brauchen. Einfache Bedienung und volle Funktionen: Über das Bedienfeld können alle notwendigen Steuerungen für Gleichstrom-, Wechselstrom-WIG-Schweißen mit HF- oder Kontaktzündung schnell eingestellt werden. Es ist auch sehr praktisch, die Schweißparameter von den Speicherkanälen zu speichern oder aufzurufen. DC + / DC-: Verbessertes WIG-Starten. Jetzt startet DC (-), um ein scharfes Wolfram zu erhalten. Lift-Arc Start bietet AC- oder DC-Lichtbogenstart ohne Verwendung von Hochfrequenz. Die einstellbare AC-Ausgangsfrequenz ermöglicht es dem Benutzer, den Lichtbogen zu fokussieren und so die Wärmeeinflusszone zu minimieren. Die erweiterte AC-Balance-Kontrolle hilft, ein spitzes Wolfram beizubehalten, um den Lichtbogen in der Schweißverbindung zu lenken. Unabhängige Amplituden- / Stromstärkeregelung ermöglicht die unabhängige Einstellung von EP- und EN-Stromstärken, um die Wärmezufuhr zum Werkstück und zur Elektrode präzise zu steuern. Standard Squarewave for fast travel speeds and excellent puddle control, Sine wave for a traditional softer sounding arc, Triangular wave to reduce the heat input into the weld at low amperage. Soft squarewave for a soft buttery arc with maximum puddle control and good wetting action. Pilot Arc für überlegene Lichtbogenleistung und leichten Start. HF- oder Nicht-HF-Lichtbogenzündung: Zuverlässige Plasma-Lichtbogeninitiierung ohne Hochfrequenz. Kontinuierliche Ausgabesteuerung: Fokussieren Sie den Lichtbogen für unterschiedliche Materialstärken. Rapid Arc Restrike: schnelles Schneiden durch Lücken, sogar verstärktes Metall. Neu entwickelt mit der neuesten leistungselektronischen Technologie für verbesserte Zuverlässigkeit. 3 Jahre Garantie auf Teile, 5 Jahre Garantie auf Transformator. VECTOR DIGITAL O251 MULTIFUNKTION. Stab (MMA) Schweißleistung, 40°C, 10min. WIG (GTAW) Schweißleistung, 40°C, 10min. 70.0-80.0V DC. CUT-Leistung – Leichter Stahl. Große Schneidkraft in einem kleinen Paket – der in der Industrie beweglichste und leistungsfähigste 40A Plasmaschneider bietet 10mm Leichtmetall schneiden. Das Gerät bietet eine einfache Verbindung zu 115V oder 230V mit Auto-Line-Technologie und MVP Adaptern. Allgemeine Ansicht der Systemsteuerung. Digitales Voltmeter / Parametermeter. JOB und SPEICHERN 10. Allgemeine Ansicht des Contrl-Panels (Fortsetzung). Absoluter Einstellbereich 0.1s to 20s (0.1S Schritte). Der Hauptstrom Einstellbereich 10A bis 100A. Einstellbereiche :0.1S-10S (0.1S Schritte). Einstellbereiche 10A bis 200A (DC WIG Modus), 10 to 200A (AC HF WIG Modus). Einstellbereiche 10AMP bis 200AMP (DC WIG Modus), 10A bis 200A (AC HF WIG Modus). Einstellbereiche 1HZ – 200HZ. Die Hot-Start-Funktion zündet die Elektrode zuverlässig und schmilzt perfekt, um auch zu Beginn der Naht die beste Qualität zu gewährleisten. Während des Schweißprozesses verhindert Arcforce das Anhaften der Elektrode im Schweißbad bei Stromerhöhungen. PPS Impulse pro Sekunde (Hz): DC=0.1- 5,000 PPS. % ON-% Peak Time: 5-95% Steuert die Zeitdauer während jedes Impulszyklus bei der Spitzen-Stromstärke. Hintergrund-Ampere: 5-99% Legt den niedrigen Amperewert als % der Spitzenampere fest. Typischerweise von 1 bis 10 PPS. Bietet einen Heiz- und Kühleffekt auf die Schweißpfütze und kann Verzerrungen durch Senkung der durchschnittlichen Stromstärke reduzieren. Dieser Erwärmungs- und Abkühlungseffekt erzeugt auch ein deutliches Welligkeitsmuster in der Schweißraupe. Die Beziehung zwischen Pulsfrequenz und Fahrgeschwindigkeit bestimmt den Abstand zwischen den Wellen. Langsames Pulsieren kann auch mit der Zugabe von Zusatzmetall koordiniert werden und die Gesamtkontrolle der Schweißpfütze erhöhen. Bei einem Überschuß von 40 PPS wird gepulstes TIG hörbarer als sichtbar und verursacht eine erhöhte Puddelbewegung für eine bessere geschweißte Mikrostruktur. Pulsieren des Schweißstroms bei hohen Drehzahlen – zwischen einem hohen Peak und einer niedrigen Hintergrundstromstärke kann auch den Lichtbogen einschnüren und fokussieren. Dies führt zu einer maximalen Lichtbogenstabilität, einer erhöhten Eindringtiefe und erhöhten Geschwindigkeiten (Üblicher Bereich: 100-500 PPS). Die Arc-Sharpening-Effekte des Hochgeschwindigkeits-Pulsens werden auf neue Dimensionen erweitert. Die Fähigkeit, mit 5.000 PPS zu pulsen, erhöht die Lichtbogenstabilität und das Konzentrationspotential weiter – was für die Automatisierung äußerst vorteilhaft ist, wenn maximale Geschwindigkeiten benötigt werden. Durch diese Lösung gehören Schweißfehler der Vergangenheit an und Schweißverstärkung wird signifikant reduziert. Stellen Sie hier den Heißstart-Strom und die Zeit ein. Während des Schweißprozesses verhindert Arcforce ein Verkleben der Elektrode im Schweißbad durch Stromerhöhungen. Dies erleichtert das Schweißen von Schmelzelektroden mit großen Tropfen bei niedrigen Strom- Stärken, besonders bei einem kurzen Bogen. WIG-Brenner: WP-26 Gasanschluss: M16 Kabellänge 3M 5-poliger Steuerkoppler. Elektrodenhalter mit Kabel 3M/200A. AG 60-Brenner / 4.5M. Erdungsklemme mit Kabel 3m. Wasserkühleinheit: wc-100 Betriebsspannung:230V 50/60Hz Nennleistung:260W Kühlleistung:1.5KW(1L/MIN) Tankvolumen:6.5L. WIG-Brenner: DGT 26 Kühlmethode: Luftgekühlt Strmostärke: DC 200A AC 125A Auslastung: 35% Elektrodengröße: 1.0-4.0. Fußpedal Wagen: 5-poliger Stecker. The item “Vector Wig Schweißgerät AC/DC WIG O251 Puls Inverter Mit plasma ALU TIG ARC MMA” is in sale since Monday, December 30, 2019. This item is in the category “Business & Industrie\Metallbearbeitung & Schlosserei\Schweißen & Löten\Schweißen\Schweißgeräte & -brenner\WIG/TIG-Schweißgeräte”. The seller is “vector-welding” and is located in Köln. This item can be shipped to North, South, or Latin America, all countries in Europe, all countries in continental Asia, Australia.
  • Gerätetyp: MMA/ARC/Elektrodenhand
  • Garantie: 5 Jahre**
  • Lieferland: Deutschland
  • Marke: VECTOR WELDING TECHNOLOGY GmbH
  • Herstellernummer: T1041VD
  • Herstellungsland und -region: Deutschland
  • EAN: 4251210402511

Vector Wig Schweißgerät AC/DC WIG O251 Puls Inverter Mit plasma ALU TIG ARC MMA

CT520D, Plasma Cutter/TIG/Stick ARC MMA 50A/200A Inverter Welder IGBT 110/220V

CT520D, Plasma Cutter/TIG/Stick ARC MMA 50A/200A Inverter Welder IGBT 110/220V
CT520D, Plasma Cutter/TIG/Stick ARC MMA 50A/200A Inverter Welder IGBT 110/220V
CT520D, Plasma Cutter/TIG/Stick ARC MMA 50A/200A Inverter Welder IGBT 110/220V
CT520D, Plasma Cutter/TIG/Stick ARC MMA 50A/200A Inverter Welder IGBT 110/220V
CT520D, Plasma Cutter/TIG/Stick ARC MMA 50A/200A Inverter Welder IGBT 110/220V
CT520D, Plasma Cutter/TIG/Stick ARC MMA 50A/200A Inverter Welder IGBT 110/220V
CT520D, Plasma Cutter/TIG/Stick ARC MMA 50A/200A Inverter Welder IGBT 110/220V
CT520D, Plasma Cutter/TIG/Stick ARC MMA 50A/200A Inverter Welder IGBT 110/220V
CT520D, Plasma Cutter/TIG/Stick ARC MMA 50A/200A Inverter Welder IGBT 110/220V
CT520D, Plasma Cutter/TIG/Stick ARC MMA 50A/200A Inverter Welder IGBT 110/220V
CT520D, Plasma Cutter/TIG/Stick ARC MMA 50A/200A Inverter Welder IGBT 110/220V
CT520D, Plasma Cutter/TIG/Stick ARC MMA 50A/200A Inverter Welder IGBT 110/220V

CT520D, Plasma Cutter/TIG/Stick ARC MMA 50A/200A Inverter Welder IGBT 110/220V
3 IN 1 WELDER- 3 in 1 200-Amp DC TIG, ARC welder and 50-Amp air Plasma Cutter. During the operation of MMA welding or TIG welding, this welding & cutting equipment is featured with the stability of output. Switching welding mode easily. Also equipped with distinctive LCD monitor which demonstrates current for your inspection. It’s easy to inspect and use. DUAL VOLTAGE- 110/220V input, with voltage compensation for voltage fluctuation. ARC stick welding/argon welding switch. PROTECTION & DISSIPATION- Over-voltage, over-current, over-heat protection. 0-10s adjustable current decay time, 0-15s adjustable gas delay time. Powerful cooling system to protect welder. WIDE APPLICATION- Suitable for machinery manufacturing, sheet metal processing, guardrail, automotive maintenance, iron processing, large projects, factory, shipyard, home decoration, construction field, etc. 3 In 1 Combo Welder. 3 in 1 combo welder. TIG, Stick and Plasma Cutter. Dual Voltage input: 110V or 220V. Voltage compensation function to deal with fluctuate of power network. Fast cooling fan, allows maximum power consumption, increases the operating time (ED) of the unit. Overheat protection starts, the unit is overloaded. A yellow indicator light turns on, goes out as soon as the unit has cooled down again. Suitable for machinery manufacturing, sheet metal processing, guardrail, automotive maintenance, iron processing, large projects, factory, shipyard, home decoration, construction field, etc. 3 In 1 CT-520D Welder. This is a 3 in 1 combo welding machine, T. IG, MMA and Plasma Cutter. Support 110V or 220V dual voltage input, easy to adjust output current: 20-200A. 60% duty circle, easy to start arc, less splash. Perfect choice for professional or daily repair works! 3 In 1 Welder. Output Current Cutter/TIG/ARC: 50A/200A/200A. 1 x Earth Clamp. 1 x Cutting torch. 1 x TIG torch. We believe that it is our vision and mission to provide innovative products with best service and competitive price to satisfy you. Our goal is to make sure that you can find exactly what you are looking for and make it easy for you to place your orders. California Warehouse: City of Industry, CA. If you need to return, please check twice to confirm the item not work and contact our customer service representative, let us know the detailed problem and send us some pictures for confirmation. Please make sure that item has NO man-made sabotage. Used items will not be accepted for return. All emails will be responded to within. Special circumstances will be listed clearly in the listing. Please do check everything carefully after you received the parcel, any the damage except DOA (Dead-On-Arrival) would not be covered if it’s your fault. Caifornia Warehouse: 18501 Arenth Ave, City of Industry, CA 91748. 300 W Airtex Blvd, Suite 200, Houston, TX 77090. 2125 Gateway Blvd, Hebron, KY 41048. 1000 High Street, Perth Amboy, NJ 08861. The item “CT520D, Plasma Cutter/TIG/Stick ARC MMA 50A/200A Inverter Welder IGBT 110/220V” is in sale since Wednesday, January 22, 2020. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Welding & Soldering Equipment\Welding Equipment & Accessories\Welders, Cutters & Torches\TIG Welders”. The seller is “ganfeii1_4″ and is located in Rowland Heights, California. This item can be shipped to United States, Canada, Mexico.
  • Brand: VEVOR
  • MPN: TLPWF004
  • Item Type: Inverter Welder
  • Welded Material: Stainless Steel, Alloy Steel, Mild Steel, Copper
  • Welding Process: TIG/ARC/Plasma Cutter
  • Polarity: DC
  • Welder Industrial Class: Medium
  • Function: TIG/ARC/Plasma Cutter
  • Model: CT520D
  • Output current TIG: 10-200A
  • Output current Stick: 10-200A
  • Output Current Cut: 10-50A
  • Duty cycle Cut: 60%@50A, 100%@40A
  • Duty cycle TIG: 60%@200A
  • Duty cycle Stick: 60%@200A
  • Cutting Thickness: 1/2″(12.7mm)
  • Voltage: 110/220V±15%, 50/60Hz

CT520D, Plasma Cutter/TIG/Stick ARC MMA 50A/200A Inverter Welder IGBT 110/220V

Air Plasma Cutter 50A DC Inverter 110V/220V Cutting Welders Non-Pilot Arc Torch

Air Plasma Cutter 50A DC Inverter 110V/220V Cutting Welders Non-Pilot Arc Torch
Air Plasma Cutter 50A DC Inverter 110V/220V Cutting Welders Non-Pilot Arc Torch
Air Plasma Cutter 50A DC Inverter 110V/220V Cutting Welders Non-Pilot Arc Torch
Air Plasma Cutter 50A DC Inverter 110V/220V Cutting Welders Non-Pilot Arc Torch
Air Plasma Cutter 50A DC Inverter 110V/220V Cutting Welders Non-Pilot Arc Torch
Air Plasma Cutter 50A DC Inverter 110V/220V Cutting Welders Non-Pilot Arc Torch
Air Plasma Cutter 50A DC Inverter 110V/220V Cutting Welders Non-Pilot Arc Torch
Air Plasma Cutter 50A DC Inverter 110V/220V Cutting Welders Non-Pilot Arc Torch
Air Plasma Cutter 50A DC Inverter 110V/220V Cutting Welders Non-Pilot Arc Torch
Air Plasma Cutter 50A DC Inverter 110V/220V Cutting Welders Non-Pilot Arc Torch
Air Plasma Cutter 50A DC Inverter 110V/220V Cutting Welders Non-Pilot Arc Torch

Air Plasma Cutter 50A DC Inverter 110V/220V Cutting Welders Non-Pilot Arc Torch
You may also like. Air Plasma Cutter 50A DC Inverter 110V/220V Cutting Welders Non-Pilot Arc Torch. Max Cut Thickness: 1/2″ , cut speed :7.8 in/minMax Severance Thickness: 3/4″ , cut speed:3.9in/min, Automatic Dual Voltage / Dual Frequency (110/220V 50/60Hz). Compact plasma cutter uses non-hazardous compressed air to cut stainless steel, alloy steel, mild steel, copper, and aluminum. Designed for both demanding industrial and construction work, or home and hobby use. Pilot arc torch efficiently cuts though rough, painted, and rusty surfaces and produces minimal slag. MOSFET transistor produces a uniform output to enable cutting of thin metal and can reach high power output for cutting thick metal. 5.50-Ampere digital inverter air plasma cutter delivers smooth, clean cuts every time. 1 x Cutting Gun. 1 x Grounding Clamp. 1 set of consumables. There will be no plug due to plug differences between countries! We DO NOT accept payments by cheque. We will inform you if we need more time to prepare the items. As usual, it take 20 to 45 days to reach your designated address by HK Post. The listing will show the item locations. If item in your country warehouse , you will get it as soon as possible. Pls check the listing item location. SERVICE TRANSIT TIME is provided by the carrier and excludes weekends and holidays. Transit times may vary, particularly during the holiday season. If you are not satisfied, please kindly let us know. Your constructive advice will be our motion to revise and improve, thank you for your understanding. We will reply you as soon as possible. The item “Air Plasma Cutter 50A DC Inverter 110V/220V Cutting Welders Non-Pilot Arc Torch” is in sale since Wednesday, December 5, 2018. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Welding & Soldering Equipment\Welding Equipment & Accessories\Welders, Cutters & Torches\Plasma Cutters”. The seller is “dalishilock” and is located in Ontario, California. This item can be shipped to United States.
  • Model: CUT-50
  • Product Type: Plasma Cutters
  • Duty Cycle: 60%
  • Efficiency: 85%
  • Thickness: 1-10mm
  • Country/Region of Manufacture: China
  • Item Type: Plasma Cutter
  • Voltage: 110V/220V
  • Power Capacity: 5.8KVA
  • No laod Voltage: 58V
  • Current Range: 20-50A
  • Color: Yellow
  • MPN: Does Not Apply
  • Input Amperage: 50 amps
  • Brand: Unbranded

Air Plasma Cutter 50A DC Inverter 110V/220V Cutting Welders Non-Pilot Arc Torch

Kraft&Dele KD829 3in1 MMA ARC TIG CUT 160A welder plasma cutter inverter IGBT

Kraft&Dele KD829 3in1 MMA ARC TIG CUT 160A welder plasma cutter inverter IGBT
Kraft&Dele KD829 3in1 MMA ARC TIG CUT 160A welder plasma cutter inverter IGBT
Kraft&Dele KD829 3in1 MMA ARC TIG CUT 160A welder plasma cutter inverter IGBT
Kraft&Dele KD829 3in1 MMA ARC TIG CUT 160A welder plasma cutter inverter IGBT
Kraft&Dele KD829 3in1 MMA ARC TIG CUT 160A welder plasma cutter inverter IGBT
Kraft&Dele KD829 3in1 MMA ARC TIG CUT 160A welder plasma cutter inverter IGBT
Kraft&Dele KD829 3in1 MMA ARC TIG CUT 160A welder plasma cutter inverter IGBT
Kraft&Dele KD829 3in1 MMA ARC TIG CUT 160A welder plasma cutter inverter IGBT
Kraft&Dele KD829 3in1 MMA ARC TIG CUT 160A welder plasma cutter inverter IGBT
Kraft&Dele KD829 3in1 MMA ARC TIG CUT 160A welder plasma cutter inverter IGBT
Kraft&Dele KD829 3in1 MMA ARC TIG CUT 160A welder plasma cutter inverter IGBT

Kraft&Dele KD829 3in1 MMA ARC TIG CUT 160A welder plasma cutter inverter IGBT
GREYEAGLE SSL RWD – 2018. Warehouse Courland UK Ltd Unit 201/202 Anglesey Business Park Littleworth Road Hednesford, Staffordshire WS12 1NR, England United Kingdom. FULL AFTER SALE SERVICE. THE LISTING IS FOR. Kraft&Dele KD829 3in1 MMA TIG CUT 160A welder plasma cutter inverter IGBT. 3 Functional inverter welding machine KD829 from a reputable brand Kraft & DeIe is designed for arc welding with a coated electrode (MMA), a non-consumable electrode in a gas jacket (TIG) and cutting plasma in a compressed air jacket (CUT). Inverter welders are much lighter than traditional welding machines they have high efficiency and welding is much easier thanks to the inverter technology used. The welding machine has three operating modes. 1 MMA welding with medium and thick coated electrodes o diameters 1.6-4.0mm in the welding current ranges 20-160A. 2 TIG welding with 1.6 – 3.2 mm tungsten electrodes (unopened) in an inert gas (argon). In this way it is possible welding of steels, stainless steels, low-carbon steels, and low-alloy steels and precious metals. Thanks to the TIG method, we can obtain more precise and durable welds. 3 plasma CUT plasma cutting in steel, stainless steel, low-carbon, low-alloy and precious metals to a thickness 10mm. The device has additional functions such as HOT START, ANTI STICK, and ARC FORCE that make work easier. HOT START – is a system that allows you to increase the current at startup for faster ignition of the welding gap. ANTI STICK – anti-sticking function welded material. ARC FORCE – the system of automatic stabilization of the hatch, regardless of its length. Smooth welding current adjustment 20-160A. Possibility to use 1.6 – 325mm electrodes. Digital display of amperage. Possibility of working with the aggregat. Functions: HOT START, ANTI STICK, ARC FORCE. Equipped with a thermostat and fan. Arc ignition: contact. The device’s duty cycle is a percentage break of 10 minutes per the time that the device can be welded with the specified one value of the welding current and the necessary break time at work. (Eg 60% work cycle 6 minutes work 4 minutes rest). Power supply: 230V l 50 Hz. Input voltage: 220 – 240V. Output current range: 15-160A. Rated input voltage: 26.4V. Diameter of electrodes: 1.6 – 3.25 mm. Working cycle: 60% – 160A. Power coefficient’0.93 (COS). Degree of protection: IP21. Arc ignition: non-contact (TIG and CUT) and touch (MMA). The welding set includes the following. Inverter inverter MMA / TIG / CUT KD829 Kraft & Dele 160A. MMA DIN welding wire 2m with electrode holder. 1.5 m din wire. 3 m TIG welding line. Cutter cable – 3 m. Brush & welding mask. Manual in Polish (English version available for request). The manual comes in polish language, English version available on request. Please note that the inverter includes European/Continental style 2 pin plug. With this option, you will receive Grey Eagle Shop’s bank details when creating an order. Safely pack item(s) in a unique bundling, including documentation, manuals, guarantee data, registration, and so on. We are not in charge of lost or harmed packages. On the off chance that you are not 100% fulfilled by your item, you can return or trade your request inside 30 days from the date of receipt. Safely package things as we are not in charge of any things lost or harmed in travel. Any item not in “sellable” condition. Future Changes We are fully entitled to change these terms whenever we wish to do so, the changes will be presented on this page, the landing page, and different areas we consider proper with the goal that you know about the set of accepted rules of our administration. We save and are qualified for all rights to adjust, modify, change or overhaul these terms at any given time, so please check back from time to time. Deliveries to Northern Ireland, Scotland, Channel Islands, and overseas might take longer, and might charge extra costs for this. Processing We take unprecedented measures to guarantee your things arrive securely and in place. CHECK MY OTHER ITEMS. Sign up for our newsletter!! The item “Kraft&Dele KD829 3in1 MMA ARC TIG CUT 160A welder plasma cutter inverter IGBT” is in sale since Friday, August 9, 2019. This item is in the category “Business, Office & Industrial\CNC, Metalworking & Manufacturing\Welding & Soldering Equipment\Welding Equipment & Accessories\Welders, Cutters & Torches\Plasma Cutters”. The seller is “greyeagleshopcouk” and is located in Hednesford. This item can be shipped worldwide.
  • Model: KD829
  • Modified Item: No
  • Thickness of materials cut by plasma: up to 10mm
  • Custom Bundle: No
  • Hot start: YES!
  • MPN: KD829
  • Brand: Kraft&Dele
  • Country/Region of Manufacture: Poland
  • Item Type: Plasma Cutter
  • Unit Quantity: 1
  • Anti stick: YES!
  • Arc force: YES!
  • Digital displayer: YES!
  • Arc ignition: Contact
  • Power supply: 230V / 50Hz
  • Input Voltage [V: 220 – 240
  • Power consumption [kVA: 6
  • Output range [A: 15 – 160
  • Rated input voltage [V: 26.4
  • Duty cycle: 60% – 160A
  • Efficiency [%: 85
  • Power coefficient: 0’93 (COS)
  • Protection class: IP21
  • Unit Type: kg
  • Net weight [kg: 15
  • Gross weight [kg: 18
  • Dimensions [mm: 425 x 205 x 355
  • Arc ignition for TIG & CUT: Contactless
  • Door to door warranty service: 12 months for all UK customers
  • Input Amperage: 12 amps
  • Who is responsible for warranty repairs?: Our UK based company – Courland UK Ltd
  • UK Shipping charges: For free to any place within UK mainlands
  • MMA welding wire with electrode holder: YES!
  • Ground wire with a clamp: YES!
  • Tig torch with cable: YES!
  • Cutting torch with cable: YES!
  • Brush & Welding mask: YES!
  • Welding methods: MMA / ARC, TIG DC, CUT
  • MMA electrodes diameter [mm: 1.60 – 4.00
  • TIG electrodes diameter [mm: 1.6 – 3.2

Kraft&Dele KD829 3in1 MMA ARC TIG CUT 160A welder plasma cutter inverter IGBT

Plasma Cutter 50A Compressor IGBT Inverter Dual Voltage Pilot ARC Welder Kit

Plasma Cutter 50A Compressor IGBT Inverter Dual Voltage Pilot ARC Welder Kit
Plasma Cutter 50A Compressor IGBT Inverter Dual Voltage Pilot ARC Welder Kit
Plasma Cutter 50A Compressor IGBT Inverter Dual Voltage Pilot ARC Welder Kit
Plasma Cutter 50A Compressor IGBT Inverter Dual Voltage Pilot ARC Welder Kit
Plasma Cutter 50A Compressor IGBT Inverter Dual Voltage Pilot ARC Welder Kit
Plasma Cutter 50A Compressor IGBT Inverter Dual Voltage Pilot ARC Welder Kit
Plasma Cutter 50A Compressor IGBT Inverter Dual Voltage Pilot ARC Welder Kit
Plasma Cutter 50A Compressor IGBT Inverter Dual Voltage Pilot ARC Welder Kit
Plasma Cutter 50A Compressor IGBT Inverter Dual Voltage Pilot ARC Welder Kit
Plasma Cutter 50A Compressor IGBT Inverter Dual Voltage Pilot ARC Welder Kit

Plasma Cutter 50A Compressor IGBT Inverter Dual Voltage Pilot ARC Welder Kit
You may also like. Plasma Cutter 50A with Compressor IGBT Inverter Welder Portable Air Welding &Kit. Max Cut Thickness: 1/2″ , cut speed :7.8 in/minMax Severance Thickness: 3/4″ , cut speed:3.9in/min, Automatic Dual Voltage / Dual Frequency (110/220V 50/60Hz). Compact plasma cutter uses non-hazardous compressed air to cut stainless steel, alloy steel, mild steel, copper, and aluminum. Designed for both demanding industrial and construction work, or home and hobby use. Pilot arc torch efficiently cuts though rough, painted, and rusty surfaces and produces minimal slag. MOSFET transistor produces a uniform output to enable cutting of thin metal and can reach high power output for cutting thick metal. 5.50-Ampere digital inverter air plasma cutter delivers smooth, clean cuts every time. 1 x Cutting Gun. 1 x Grounding Clamp. 1 set of consumables. Attention:There will be no plug due to plug differences between countries. We DO NOT accept payments by cheque. We will inform you if we need more time to prepare the items. As usual, it take 20 to 45 days to reach your designated address by HK Post. The listing will show the item locations. If item in your country warehouse , you will get it as soon as possible. Pls check the listing item location. SERVICE TRANSIT TIME is provided by the carrier and excludes weekends and holidays. Transit times may vary, particularly during the holiday season. If you are not satisfied, please kindly let us know. Your constructive advice will be our motion to revise and improve, thank you for your understanding. We will reply you as soon as possible. The item “Plasma Cutter 50A Compressor IGBT Inverter Dual Voltage Pilot ARC Welder Kit” is in sale since Tuesday, November 20, 2018. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Welding & Soldering Equipment\Welding Equipment & Accessories\Welders, Cutters & Torches\Plasma Cutters”. The seller is “dalishilock” and is located in Ontario, California. This item can be shipped to United States.
  • Duty Cycle: 60%
  • Efficiency: 85%
  • Power Factor: 0.85cos
  • Thickness: 1-10mm
  • Insulation Degree: F
  • Country/Region of Manufacture: China
  • Item Type: Plasma Cutter
  • Protrction Degree: IP21S
  • Power Capacity: 5.8KVA
  • No load Voltage: 58V
  • Current Range: 20-50A
  • Model: CUT-50P
  • Voltage: 220V
  • MPN: Does Not Apply
  • Input Amperage: 50 amps
  • Brand: Unbranded

Plasma Cutter 50A Compressor IGBT Inverter Dual Voltage Pilot ARC Welder Kit

Inverter DC TIG/ARC/CUT Welding Machine 3in1 Pilot ARC Plasma Cutter & Welder

Inverter DC TIG/ARC/CUT Welding Machine 3in1 Pilot ARC Plasma Cutter & Welder
Inverter DC TIG/ARC/CUT Welding Machine 3in1 Pilot ARC Plasma Cutter & Welder
Inverter DC TIG/ARC/CUT Welding Machine 3in1 Pilot ARC Plasma Cutter & Welder
Inverter DC TIG/ARC/CUT Welding Machine 3in1 Pilot ARC Plasma Cutter & Welder
Inverter DC TIG/ARC/CUT Welding Machine 3in1 Pilot ARC Plasma Cutter & Welder
Inverter DC TIG/ARC/CUT Welding Machine 3in1 Pilot ARC Plasma Cutter & Welder
Inverter DC TIG/ARC/CUT Welding Machine 3in1 Pilot ARC Plasma Cutter & Welder

Inverter DC TIG/ARC/CUT Welding Machine 3in1 Pilot ARC Plasma Cutter & Welder
HIGH QUALITY TIG/MMA/CUT Non-Touch PILOT ARC WELDING MACHINE 220V. 120AMP TIG WELDING MACHINE w POWER WP-17 TIG TORCH 120A MMA/STICK/ARC WELDING MACHINE. 300A WELDING HOLDER 30AMP Non-Touch PILOT ARC IGNITION 1-10MM CUT THICKNESSE PLASMA CUTTER – 2018 MODEL w POWER 50/60A WSD-60PTORCH FAST. EMC, LVD, C-TICK SAFETY STANDARDS!! BRAND NEW IN THE BOX with ACCESSORIES and FREE CONSUMABLES! With the integrated Plasma cutter CUT 50 PILOT ARC can be cut without problems all conductive metals. For example: aluminum, steel, copper, brass, titanium and so on (depending on material). TIG high-frequency contact ignition, can be cut without problems all conductive metals. For example: steel, Stainless, brass, titanium and so on (depending on material). CUT Non-Touch Pilot Arc – Absolutely easy-to-use Non-Touch Pilot Arc ignition.. A light stroke over the workpiece is sufficient. Smart Cooling Fast cooling fan allows maximum power consumption and increases the operating time (ED) of the unit. Overheat protection starts as soon as the unit is overloaded. A yellow indicator light turns on and goes out as soon as the unit has cooled down again. Cutting power up to 10 mm material thickness (depending on material). With all our devices, we trust in MOSFET technology from Toshiba, whose innovative solutions set new standards in welding technology. The single-phase alternating current is to be protected in the household with a 16 A fuse. The welding machine is connected directly to the single-phase alternating current (AC)220V (+ -15%), 50/60 Hz operation. POWER FACTOR: 0.93. RATED DUTY CYCLE: 60%. PACKING SIZE & WEIGHT. DIMENSIONS (L x W x H): 406 x 205 x 425mm. 1 x Tig Torch (WP-17). 1 x Welding Holder (300A). 1 x Earth Clamp (300A). 1 x Manual (United States). NOTICE: THE MACHINE IS WITHOUT PLUG! WELDING RODE ELECTRODE HOLDER. During this period, we will repair or replace a defective product or part with a new or refurbished item. CA Based Tech Support! The item “Inverter DC TIG/ARC/CUT Welding Machine 3in1 Pilot ARC Plasma Cutter & Welder” is in sale since Monday, August 26, 2019. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Welding & Soldering Equipment\Welding Equipment & Accessories\Welders, Cutters & Torches\Plasma Cutters”. The seller is “mostech16″ and is located in Rowland Heights, California. This item can be shipped to United States.
  • Insulation Class: F
  • Rated Duty Cycle: 60%
  • Weight: 12kg
  • Model: ct312P
  • Frequency: 12kg
  • Country/Region of Manufacture: Canada
  • Power Factor: 85%
  • Welding Thickness: 0.93
  • Dimensions: 1-8mm
  • MPN: Multi-2
  • Brand: HIWAY
  • Welding Type: 340*160*240mm
  • Welding Current: 10-125/10-30/10-110

Inverter DC TIG/ARC/CUT Welding Machine 3in1 Pilot ARC Plasma Cutter & Welder

CTS-180, 3-in-1 Combo 40 Amp Plasma Cutter 180A TIG-Torch Stick Arc DC Welder

CTS-180, 3-in-1 Combo 40 Amp Plasma Cutter 180A TIG-Torch Stick Arc DC Welder
CTS-180, 3-in-1 Combo 40 Amp Plasma Cutter 180A TIG-Torch Stick Arc DC Welder
CTS-180, 3-in-1 Combo 40 Amp Plasma Cutter 180A TIG-Torch Stick Arc DC Welder
CTS-180, 3-in-1 Combo 40 Amp Plasma Cutter 180A TIG-Torch Stick Arc DC Welder
CTS-180, 3-in-1 Combo 40 Amp Plasma Cutter 180A TIG-Torch Stick Arc DC Welder

CTS-180, 3-in-1 Combo 40 Amp Plasma Cutter 180A TIG-Torch Stick Arc DC Welder
The Amico Power CTS-180 is a new digitally controlled 40 amps Plasma Cutter, 180 amps TIG torch and 160 amps Stick Arc 3-in-1 Combo Welding Machine. Designed for portable repair work and small business project use, it is ideal for a welding enthusiast or hobbyist with basic repair needs and general light welding requirements. 5-40A Plasma Cutter ideal cuts a thickness of 1/2 in. The max severance thickness 3/4 in. 20-180A TIG Torch compact welder has everything you could ask for in the way of features for welding which includes. If you want to weld Steel, Chrome Moly, Stainless, Titanium, or any other metal can be welded with DC output. 20-160A DC Stick/Arc electric current output, easy Arc start, stable welding Arc, deep weld pool, and beautiful welding shape are suitable for welding with different kinds of acid or basic electrode. Is the perfect choice for projects and repairs around the home and auto body shop. Combo 3-in-1 multifunction Plasma Cutter/TIG Torch/Stick Arc professional welding machine. Advanced IGBT technology, synergic controlled, very easy and simple operation. Featured wave-form control system: perfect wave form of volts and amps during, short circuits and Arc burning cycles. Automatic compensation for voltage fluctuation, over-voltage protection, under voltage protection, over current protection, over load protection. Automatic temperature control, fan dormancy, steeples amperage control, all generators friendly. This is optimized to deliver a flawless weld, making spatter and post-weld cleanup almost non-existent. Type: Plasma Cutter, TIG-Torch, Stick/Arc 3-in-1 Combo Welding. Plasma Cutter: 230V / 5-40A & 115V / 5-33A. TIG Torch: 230V / 20-180A &115V / 20-140A. STICK ARC: 230V / 20-160A & 115V / 20-130A. Welding output, 104F(40C). Plasma Cutter: 40A / 98V. TIG Torch: 180A / 17.2V. STICK ARC: 160A / 26.4V. Plasma Cutter: 20.8A / 230V & 33.1A / 115V. TIG Torch: 16.8A / 230V & 23.7A / 115V. STICK ARC: 22.9A / 230V & 35.6A / 115V. Plasma Cutter: 60% at 40A & 100% at 29.6A. TIG Torch: 60% at 180A & 100% at 118.5A. STICK ARC: 60% at 160A & 100% at 118.5A. Nominal DC Open Circuit Voltage: 73V. Power factor: 0.93. Output Terminal Type: Direct Wire. Cooling Method: Fan Air Cooled. Recommended Gas Inlet Flow. Maximum Severance Cutting Thickness: 3/4 inch. Movement Speed: 10.0 inch. Net Weight: 30 lbs. Product Size: 19.5 x 9.0 x 14 in. Package Weight: 48 lbs. CTS-180 Cutter/TIG/Stick/Arc 3-in-1 Welding Machine. 13 Feet (PT-31/LG-40) Plasma Cutter Gun Assembly. 13 Feet (WP-17) TIG Torch Gun Assembly. 10 Feet 300A Electrode Holder, Lead Dines. 10 Feet 300A Work Clamp with Cable. 8 Feet Argon Gas Hose. 230V to 110V Power Adapter. 2 Pieces Tungsten Needles 1/16 in. 2 Pieces Tungsten Needles 5/64 in. 2 pieces Electrode 1/8 in. 2 pieces Electrode 5/32 in. The item “CTS-180, 3-in-1 Combo 40 Amp Plasma Cutter 180A TIG-Torch Stick Arc DC Welder” is in sale since Thursday, February 14, 2019. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Welding & Soldering Equipment\Welding Equipment & Accessories\Welders, Cutters & Torches\TIG Welders”. The seller is “dricotire1819″ and is located in Rowland Heights, California. This item can be shipped to United States.
  • TIG Torch: 20-180 Amps
  • Model: CTS-180
  • Stick Arc: 20-160 Amps
  • Duty Cycle: 60% at 40A & 180A
  • Item Type: Inverter Welder
  • Welding Process: TIG
  • Polarity: DC
  • Power Source: AC 110V & 230V Dual Voltage
  • Welder Type: 3-in-1 Combo Multifunction
  • Plasma Cutter: 5-40 Amps
  • Welded Material: Stainless Steel, Alloy Steel, Mild Steel, Copper,
  • MPN: APCTS180
  • Brand: AMICO Power

CTS-180, 3-in-1 Combo 40 Amp Plasma Cutter 180A TIG-Torch Stick Arc DC Welder

CT520D, Plasma Cutter/TIG/Stick ARC MMA 50A/200A Inverter Welder IGBT 110/220V

CT520D, Plasma Cutter/TIG/Stick ARC MMA 50A/200A Inverter Welder IGBT 110/220V
CT520D, Plasma Cutter/TIG/Stick ARC MMA 50A/200A Inverter Welder IGBT 110/220V
CT520D, Plasma Cutter/TIG/Stick ARC MMA 50A/200A Inverter Welder IGBT 110/220V
CT520D, Plasma Cutter/TIG/Stick ARC MMA 50A/200A Inverter Welder IGBT 110/220V
CT520D, Plasma Cutter/TIG/Stick ARC MMA 50A/200A Inverter Welder IGBT 110/220V
CT520D, Plasma Cutter/TIG/Stick ARC MMA 50A/200A Inverter Welder IGBT 110/220V
CT520D, Plasma Cutter/TIG/Stick ARC MMA 50A/200A Inverter Welder IGBT 110/220V
CT520D, Plasma Cutter/TIG/Stick ARC MMA 50A/200A Inverter Welder IGBT 110/220V
CT520D, Plasma Cutter/TIG/Stick ARC MMA 50A/200A Inverter Welder IGBT 110/220V
CT520D, Plasma Cutter/TIG/Stick ARC MMA 50A/200A Inverter Welder IGBT 110/220V
CT520D, Plasma Cutter/TIG/Stick ARC MMA 50A/200A Inverter Welder IGBT 110/220V
CT520D, Plasma Cutter/TIG/Stick ARC MMA 50A/200A Inverter Welder IGBT 110/220V

CT520D, Plasma Cutter/TIG/Stick ARC MMA 50A/200A Inverter Welder IGBT 110/220V
3 IN 1 WELDER- 3 in 1 200-Amp DC TIG, ARC welder and 50-Amp air Plasma Cutter. During the operation of MMA welding or TIG welding, this welding & cutting equipment is featured with the stability of output. Switching welding mode easily. Also equipped with distinctive LCD monitor which demonstrates current for your inspection. It’s easy to inspect and use. DUAL VOLTAGE- 110/220V input, with voltage compensation for voltage fluctuation. ARC stick welding/argon welding switch. PROTECTION & DISSIPATION- Over-voltage, over-current, over-heat protection. 0-10s adjustable current decay time, 0-15s adjustable gas delay time. Powerful cooling system to protect welder. WIDE APPLICATION- Suitable for machinery manufacturing, sheet metal processing, guardrail, automotive maintenance, iron processing, large projects, factory, shipyard, home decoration, construction field, etc. 3 In 1 Combo Welder. 3 in 1 combo welder. TIG, Stick and Plasma Cutter. Dual Voltage input: 110V or 220V. Voltage compensation function to deal with fluctuate of power network. Fast cooling fan, allows maximum power consumption, increases the operating time (ED) of the unit. Overheat protection starts, the unit is overloaded. A yellow indicator light turns on, goes out as soon as the unit has cooled down again. Suitable for machinery manufacturing, sheet metal processing, guardrail, automotive maintenance, iron processing, large projects, factory, shipyard, home decoration, construction field, etc. 3 In 1 CT-520D Welder. This is a 3 in 1 combo welding machine, T. IG, MMA and Plasma Cutter. Support 110V or 220V dual voltage input, easy to adjust output current: 20-200A. 60% duty circle, easy to start arc, less splash. Perfect choice for professional or daily repair works! 3 In 1 Welder. Output Current Cutter/TIG/ARC: 50A/200A/200A. 1 x Earth Clamp. 1 x Cutting torch. 1 x TIG torch. We believe that it is our vision and mission to provide innovative products with best service and competitive price to satisfy you. Our goal is to make sure that you can find exactly what you are looking for and make it easy for you to place your orders. California Warehouse: City of Industry, CA. If you need to return, please check twice to confirm the item not work and contact our customer service representative, let us know the detailed problem and send us some pictures for confirmation. Please make sure that item has NO man-made sabotage. Used items will not be accepted for return. All emails will be responded to within. Special circumstances will be listed clearly in the listing. Please do check everything carefully after you received the parcel, any the damage except DOA (Dead-On-Arrival) would not be covered if it’s your fault. Caifornia Warehouse: 18501 Arenth Ave, City of Industry, CA 91748. 300 W Airtex Blvd, Suite 200, Houston, TX 77090. 2125 Gateway Blvd, Hebron, KY 41048. 1000 High Street, Perth Amboy, NJ 08861. The item “CT520D, Plasma Cutter/TIG/Stick ARC MMA 50A/200A Inverter Welder IGBT 110/220V” is in sale since Thursday, October 24, 2019. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Welding & Soldering Equipment\Welding Equipment & Accessories\Welders, Cutters & Torches\TIG Welders”. The seller is “ganfeii1_4″ and is located in Rowland Heights, California. This item can be shipped to United States, Canada, Mexico.
  • Brand: VEVOR
  • MPN: TLPWF004
  • Item Type: Inverter Welder
  • Welded Material: Stainless Steel, Alloy Steel, Mild Steel, Copper
  • Welding Process: TIG/ARC/Plasma Cutter
  • Polarity: DC
  • Welder Industrial Class: Medium
  • Function: TIG/ARC/Plasma Cutter
  • Model: CT520D
  • Output current TIG: 10-200A
  • Output current Stick: 10-200A
  • Output Current Cut: 10-50A
  • Duty cycle Cut: 60%@50A, 100%@40A
  • Duty cycle TIG: 60%@200A
  • Duty cycle Stick: 60%@200A
  • Cutting Thickness: 1/2″(12.7mm)
  • Voltage: 110/220V±15%, 50/60Hz

CT520D, Plasma Cutter/TIG/Stick ARC MMA 50A/200A Inverter Welder IGBT 110/220V

CT520D Plasma Cutter TIG ARC/Stick 3-in-1 Welder 50A/200A 110/220V Dual Voltage

CT520D Plasma Cutter TIG ARC/Stick 3-in-1 Welder 50A/200A 110/220V Dual Voltage
CT520D Plasma Cutter TIG ARC/Stick 3-in-1 Welder 50A/200A 110/220V Dual Voltage
CT520D Plasma Cutter TIG ARC/Stick 3-in-1 Welder 50A/200A 110/220V Dual Voltage
CT520D Plasma Cutter TIG ARC/Stick 3-in-1 Welder 50A/200A 110/220V Dual Voltage
CT520D Plasma Cutter TIG ARC/Stick 3-in-1 Welder 50A/200A 110/220V Dual Voltage
CT520D Plasma Cutter TIG ARC/Stick 3-in-1 Welder 50A/200A 110/220V Dual Voltage
CT520D Plasma Cutter TIG ARC/Stick 3-in-1 Welder 50A/200A 110/220V Dual Voltage
CT520D Plasma Cutter TIG ARC/Stick 3-in-1 Welder 50A/200A 110/220V Dual Voltage
CT520D Plasma Cutter TIG ARC/Stick 3-in-1 Welder 50A/200A 110/220V Dual Voltage
CT520D Plasma Cutter TIG ARC/Stick 3-in-1 Welder 50A/200A 110/220V Dual Voltage
CT520D Plasma Cutter TIG ARC/Stick 3-in-1 Welder 50A/200A 110/220V Dual Voltage
CT520D Plasma Cutter TIG ARC/Stick 3-in-1 Welder 50A/200A 110/220V Dual Voltage

CT520D Plasma Cutter TIG ARC/Stick 3-in-1 Welder 50A/200A 110/220V Dual Voltage
3 IN 1 WELDER- 3 in 1 200-Amp DC TIG, ARC welder and 50-Amp air Plasma Cutter. During the operation of MMA welding or TIG welding, this welding & cutting equipment is featured with the stability of output. Switching welding mode easily. Also equipped with distinctive LCD monitor which demonstrates current for your inspection. It’s easy to inspect and use. DUAL VOLTAGE- 110/220V input, with voltage compensation for voltage fluctuation. ARC stick welding/argon welding switch. PROTECTION & DISSIPATION- Over-voltage, over-current, over-heat protection. 0-10s adjustable current decay time, 0-15s adjustable gas delay time. Powerful cooling system to protect welder. WIDE APPLICATION- Suitable for machinery manufacturing, sheet metal processing, guardrail, automotive maintenance, iron processing, large projects, factory, shipyard, home decoration, construction field, etc. 3 In 1 Combo Welder. 3 in 1 combo welder. TIG, Stick and Plasma Cutter. Dual Voltage input: 110V or 220V. Voltage compensation function to deal with fluctuate of power network. Fast cooling fan, allows maximum power consumption, increases the operating time (ED) of the unit. Overheat protection starts, the unit is overloaded. A yellow indicator light turns on, goes out as soon as the unit has cooled down again. Suitable for machinery manufacturing, sheet metal processing, guardrail, automotive maintenance, iron processing, large projects, factory, shipyard, home decoration, construction field, etc. 3 In 1 CT-520D Welder. This is a 3 in 1 combo welding machine, T. IG, MMA and Plasma Cutter. Support 110V or 220V dual voltage input, easy to adjust output current: 20-200A. 60% duty circle, easy to start arc, less splash. Perfect choice for professional or daily repair works! 3 In 1 Welder. Output Current Cutter/TIG/ARC: 50A/200A/200A. 1 x Earth Clamp. 1 x Cutting torch. 1 x TIG torch. We believe that it is our vision and mission to provide innovative products with best service and competitive price to satisfy you. Our goal is to make sure that you can find exactly what you are looking for and make it easy for you to place your orders. California Warehouse: City of Industry, CA. If you need to return, please check twice to confirm the item not work and contact our customer service representative, let us know the detailed problem and send us some pictures for confirmation. Please make sure that item has NO man-made sabotage. Used items will not be accepted for return. All emails will be responded to within. Special circumstances will be listed clearly in the listing. Please do check everything carefully after you received the parcel, any the damage except DOA (Dead-On-Arrival) would not be covered if it’s your fault. Caifornia Warehouse: 18501 Arenth Ave, City of Industry, CA 91748. 300 W Airtex Blvd, Suite 200, Houston, TX 77090. 2125 Gateway Blvd, Hebron, KY 41048. 1000 High Street, Perth Amboy, NJ 08861. The item “CT520D Plasma Cutter TIG ARC/Stick 3-in-1 Welder 50A/200A 110/220V Dual Voltage” is in sale since Friday, October 12, 2018. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Welding & Soldering Equipment\Welding Equipment & Accessories\Welders, Cutters & Torches\TIG Welders”. The seller is “dairuirui122_3″ and is located in Hebron, Kentucky. This item can be shipped worldwide.
  • Brand: VEVOR
  • MPN: QICXC004
  • Item Type: Inverter Welder
  • Welded Material: Stainless Steel, Alloy Steel, Mild Steel, Copper
  • Welding Process: TIG/ARC/Plasma Cutter
  • Polarity: DC
  • Welder Industrial Class: Medium
  • Function: TIG/ARC/Plasma Cutter
  • Model: CT520D
  • Output current TIG: 10-200A
  • Output current Stick: 10-200A
  • Output Current Cut: 10-50A
  • Duty cycle Cut: 60%@50A, 100%@40A
  • Duty cycle TIG: 60%@200A
  • Duty cycle Stick: 60%@200A
  • Cutting Thickness: 1/2″(12.7mm)
  • Voltage: 110/220V±15%, 50/60Hz

CT520D Plasma Cutter TIG ARC/Stick 3-in-1 Welder 50A/200A 110/220V Dual Voltage