Welding Dnipro-M M-16PW MMA IGBT PRO Welder Machine DC Inverter ARC 160-230V

Welding Dnipro-M M-16PW MMA IGBT PRO Welder Machine DC Inverter ARC 160-230V
Welding Dnipro-M M-16PW MMA IGBT PRO Welder Machine DC Inverter ARC 160-230V
Welding Dnipro-M M-16PW MMA IGBT PRO Welder Machine DC Inverter ARC 160-230V
Welding Dnipro-M M-16PW MMA IGBT PRO Welder Machine DC Inverter ARC 160-230V
Welding Dnipro-M M-16PW MMA IGBT PRO Welder Machine DC Inverter ARC 160-230V
Welding Dnipro-M M-16PW MMA IGBT PRO Welder Machine DC Inverter ARC 160-230V
Welding Dnipro-M M-16PW MMA IGBT PRO Welder Machine DC Inverter ARC 160-230V
Welding Dnipro-M M-16PW MMA IGBT PRO Welder Machine DC Inverter ARC 160-230V
Welding Dnipro-M M-16PW MMA IGBT PRO Welder Machine DC Inverter ARC 160-230V
Welding Dnipro-M M-16PW MMA IGBT PRO Welder Machine DC Inverter ARC 160-230V
Welding Dnipro-M M-16PW MMA IGBT PRO Welder Machine DC Inverter ARC 160-230V
Welding Dnipro-M M-16PW MMA IGBT PRO Welder Machine DC Inverter ARC 160-230V
Welding Dnipro-M M-16PW MMA IGBT PRO Welder Machine DC Inverter ARC 160-230V
Welding Dnipro-M M-16PW MMA IGBT PRO Welder Machine DC Inverter ARC 160-230V
Welding Dnipro-M M-16PW MMA IGBT PRO Welder Machine DC Inverter ARC 160-230V

Welding Dnipro-M M-16PW MMA IGBT PRO Welder Machine DC Inverter ARC 160-230V
Welding Dnipro-M M-16PW MMA IGBT PRO Welder Machine DC Inverter ARC 160-230V. The Dnipro-M M-16PW (2021) professional welding inverter is capable of welding metals with a thickness of 1.2-10 mm and cutting up to 8 mm. Can work with mains cable up to 200m long without loss of power, and with power welding cables up to 40m, which is suitable for working in places remote from the power source (at an appropriate distance). The main difference between the SAB-15DX is that each master can independently set the amount of amplification and retention of the ArcForce welding arc. By increasing it to 15-20 mm, the device automatically increases the current strength, the welding arc is not interrupted, work continues, and the electrode does not stick. The master can also increase the HotStart indicator (fast arc ignition). This function and settings are useful when welding metal with corrosion, poorly stripped metal or a workpiece with paint, when using low-quality electrodes or low voltage. The board and all contacts of the welding inverter are filled with a compound, which guarantees a degree of protection against moisture IP-23 and allows you to work efficiently and, most importantly, safely in conditions of high humidity without the risk of failure of the electronics and harm to the operator (for example, rain). The device produces a stable welding arc even with an input voltage of 130 V, which ensures uniform and efficient operation without power loss. Model M-16PW, thanks to its high arc ignition voltage – 65 V, allows you to work with materials: steel, stainless steel, cast iron. Using the arc force regulator (at minimum values), you can perform precise welding of metals with a thickness of 1.2-1.5 mm without burning, and when you set the function to high values, the metal will heat up faster and deeper, which makes the connection more durable. This function also stabilizes the welding arc, which is especially useful when working with refractory electrodes. The device operates stably even when the network drops to 160 V thanks to a capacious surge filter and powerful capacitors. Fluctuations and long-term decrease in voltage in the network do not affect the quality of the weld and the maximum thickness of penetration/cutting of metal. The SAB-15DX board is treated with a compound, thanks to which the device is protected from dust, moisture and condensation. Thanks to this, it can be used on sites and in rooms with a high level of dust in various temperature conditions (from -10°C to +50°C). MMA – working with a 1.6-4 mm electrode with metal 10-12 mm thick, cutting metal up to 8-10 mm thick. LIFT-TIG – welding with a special sleeve for TIG welding with contact ignition, non-consumable tungsten electrode in an inert protective gas environment. AntiStick – anti-stick electrode. Helps the electrode not to “freeze” to the product. TermoControl – device protection against overheating. Voltage reduction to a safe value of 20 V in idle mode. As soon as the welding process begins, the VRD system restores operating voltage parameters for reliable arc formation. The VRD function can be turned on and off for better arc ignition. MATERIAL: Metal & Plastic ABS. DUTY CYCLE at MAXIMUM LOAD (%): 35. ELECTRODE DIAMETER: 1.6-4 mm. POWER CONSUMPTION: 6.15 KW. OUTPUT CURRENT RANGE: 20-160 A. BOX DIMENSIONS: 59? 57? 63.5 cm. WEIGHT: 3.800 kg/8.360 lbs. Your payments are processed quickly and securely. THANK YOU FOR YOUR ATTENTION! PLEASE VIEW MY OTHER ITEMS.
Welding Dnipro-M M-16PW MMA IGBT PRO Welder Machine DC Inverter ARC 160-230V

Welding Dnipro-M SAB-258DPB Welder Machine Inverter DC IGBT 220V 250A MMA ARC

Welding Dnipro-M SAB-258DPB Welder Machine Inverter DC IGBT 220V 250A MMA ARC
Welding Dnipro-M SAB-258DPB Welder Machine Inverter DC IGBT 220V 250A MMA ARC
Welding Dnipro-M SAB-258DPB Welder Machine Inverter DC IGBT 220V 250A MMA ARC
Welding Dnipro-M SAB-258DPB Welder Machine Inverter DC IGBT 220V 250A MMA ARC
Welding Dnipro-M SAB-258DPB Welder Machine Inverter DC IGBT 220V 250A MMA ARC
Welding Dnipro-M SAB-258DPB Welder Machine Inverter DC IGBT 220V 250A MMA ARC
Welding Dnipro-M SAB-258DPB Welder Machine Inverter DC IGBT 220V 250A MMA ARC
Welding Dnipro-M SAB-258DPB Welder Machine Inverter DC IGBT 220V 250A MMA ARC
Welding Dnipro-M SAB-258DPB Welder Machine Inverter DC IGBT 220V 250A MMA ARC

Welding Dnipro-M SAB-258DPB Welder Machine Inverter DC IGBT 220V 250A MMA ARC
Portable welding inverter machine Dnepr-M SAB-258 DPB + CASE. MINI INVERTER – JUST 3.8kg. What is new in 258 DPB. More effective Smart cooling system. Can work even with 170V voltage. HOT START system – provides 100% arson of electrode. Anti-Stick system – prevents sticking of electrodes. Stand By will disable the device, thereby reducing the power consumption in the network. Description and characteristics of the welding machine. The SAB-258 DPB welder is a compact but powerful inverter for household use. The device is characterized by a wide range of welding and works with electrodes with a thickness of 1.6 to 4 mm. This model is characterized by working possibilities: SAB-258 DPB. It is capable of welding sheet metal up to 12 mm thick. A special attention was given to improving the design of the inverter: in particular, the board itself was additionally plated with tin. Thanks to the high-quality board and powerful power transistors, the guaranteed service life of the device is significantly increased – at average loads it can withstand more 100,000 work cycles. In turn, the efficiency of the tool is 80%, and to maintain the optimal temperature regime, all important parts are cooled by a fan. Depending on the conditions, the welding machine has two ways of connecting, let’s consider them. 1 A direct connection – assumes a negative polarity in the holder and a positive in the welding workpiece. 2 A reverse connection – on the contrary, this method is effective in the processing of thin-walled parts and when using electrodes with a basic coating. The advantages of the SAB-258 DPB include economical power consumption (the power consumption of the device is 5.5 kW), noiselessness, easy ignition of the electrode and the creation of a welding seam. In addition, this model is characterized by its mobility: the weight of the device is only 3.8 kg, and for working in remote locations the set includes wires with a length of 2.5 and 3 m. Due to its characteristics, SAB-250 allows inexperienced welders to perform their work qualitatively. Voltage power supply (V): 220. Rated welding current (A): 250. Duty cycle (%): 80 (35°). Welding current range (A): 20 – 250. Power Consumption (Watts): 5500. Electrode diameter (mm): 1.6 – 4. Weight: 3.5 kg. Please feel free to ask me if you have any question. The item “Welding Dnipro-M SAB-258DPB Welder Machine Inverter DC IGBT 220V 250A MMA ARC” is in sale since Friday, May 22, 2020. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Welding & Soldering Equipment\Welding Equipment & Accessories\Welders, Cutters & Torches\TIG Welders”. The seller is “gavrilyk1988″ and is located in Lviv. This item can be shipped worldwide.
  • Country/Region of Manufacture: Ukraine
  • MPN: Does Not Apply
  • Brand: Dnipro-M

Welding Dnipro-M SAB-258DPB Welder Machine Inverter DC IGBT 220V 250A MMA ARC

Welding Dnipro-M SAB-258 DPK Welder Machine Inverter DC IGBT 220V 250A MMA ARC

Welding Dnipro-M SAB-258 DPK Welder Machine Inverter DC IGBT 220V 250A MMA ARC
Welding Dnipro-M SAB-258 DPK Welder Machine Inverter DC IGBT 220V 250A MMA ARC
Welding Dnipro-M SAB-258 DPK Welder Machine Inverter DC IGBT 220V 250A MMA ARC
Welding Dnipro-M SAB-258 DPK Welder Machine Inverter DC IGBT 220V 250A MMA ARC
Welding Dnipro-M SAB-258 DPK Welder Machine Inverter DC IGBT 220V 250A MMA ARC
Welding Dnipro-M SAB-258 DPK Welder Machine Inverter DC IGBT 220V 250A MMA ARC

Welding Dnipro-M SAB-258 DPK Welder Machine Inverter DC IGBT 220V 250A MMA ARC
Portable welding inverter machine Dnepr-M SAB-258 DPK + CASE. MINI INVERTER – JUST 3.5 kg. What is new in 258 DPK (Updated model SAB 250 MK). More effective Smart cooling system. Can work even with 170V voltage. HOT START system – provides 100% arson of electrode. Anti-Stick system – prevents sticking of electrodes. Stand By will disable the device, thereby reducing the power consumption in the network. Description and characteristics of the welding machine. The SAB-258 DPK welder is a compact but powerful inverter for household use. The device is characterized by a wide range of welding and works with electrodes with a thickness of 1.6 to 4 mm. This model is characterized by working possibilities: SAB-258 DPK. It is capable of welding sheet metal up to 12 mm thick. A special attention was given to improving the design of the inverter: in particular, the board itself was additionally plated with tin. Thanks to the high-quality board and powerful power transistors, the guaranteed service life of the device is significantly increased – at average loads it can withstand more 100,000 work cycles. In turn, the efficiency of the tool is 80%, and to maintain the optimal temperature regime, all important parts are cooled by a fan. Depending on the conditions, the welding machine has two ways of connecting, let’s consider them. 1 A direct connection – assumes a negative polarity in the holder and a positive in the welding workpiece. 2 A reverse connection – on the contrary, this method is effective in the processing of thin-walled parts and when using electrodes with a basic coating. The advantages of the SAB-258 DPK include economical power consumption (the power consumption of the device is 5.5 kW), noiselessness, easy ignition of the electrode and the creation of a welding seam. In addition, this model is characterized by its mobility: the weight of the device is only 3.5 kg, and for working in remote locations the set includes wires with a length of 2.5 and 3 m. Due to its characteristics, SAB-250 allows inexperienced welders to perform their work qualitatively. Voltage power supply (V): 220. Rated welding current (A): 250. Duty cycle (%): 80. Welding current range (A): 20 – 250. Power Consumption (Watts): 5500. Electrode diameter (mm): 1.6 – 4. Weight: 3.5 kg. Please feel free to ask me if you have any question. Add a map to your own listings. The item “Welding Dnipro-M SAB-258 DPK Welder Machine Inverter DC IGBT 220V 250A MMA ARC” is in sale since Friday, September 29, 2017. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Welding & Soldering Equipment\Welding\Welders, Cutters & Torches\TIG Welders”. The seller is “geka.ck” and is located in Europe. This item can be shipped worldwide.
  • Power Source: 208/240V Electric
  • Model: Dnipro-M SAB 258 DPK
  • MPN: Does Not Apply
  • Brand: Dnipro-M
  • Featured Refinements: Welding Inverter
  • Processes: Arc

Welding Dnipro-M SAB-258 DPK Welder Machine Inverter DC IGBT 220V 250A MMA ARC