Amico TIG-205, 205-Amp HF-TIG Arc Stick Welder, 100250V Wide Voltage Welding

Posted on March 15, 2024 by admin

Is a rectifier incorporating the most advanced inverter technology. The welding power source can offer stronger, more concentrated, and more stable arc. TIG-205 can weld Steel, Stainless steel, Alloy steel, Mild steel, Nickel alloys, Copper, Brass, Bronze. The machine also works efficiently with generators. Power cords can properly function extended up to 700 feet. Is a professional welding machine with industrial level. Performance is remarkable, Very solid structure and professional configuration. HF Start-easy arc starting and improvers tungsten life, the HF service guarantees a start-up at 100%. 0% duty cycle at 200 amps, ensures long time welding, Very suitable for welding of various materials and projects. Advanced IGBT inverter technology, excellent Arc stability, 10-200 amps very suitable weld thin work-piece and thick work-piece. 100250V wide voltage, 50/60Hz. Almost all of the voltage and frequency can be used. Automatic compensation for voltage fluctuation, over-voltage protection, under-voltage protection, over-current protection, over-loads protection. Steeples amperage control, all generators friendly. Power cords extend to 700 feet still can use normally. The lightness and strength of its components make this a reliable work tool for professionals or personal use. Processes: TIG (GTAW), Stick, Arc. Rated Input Power: 230V/6.6KVA/40A, 115V/3.85KVA/47A. TIG Current Range: 230V/18.0V/10-200A, 115V/15.8V/10-130A. Stick Current Range: 230V/28.0V/20-200A, 115V/25.8V/20-130A. DC Open Circuit Voltage: 62-Volt. Output Voltage TIG: 230V/18.0-Volt, 115V/15.2-Volt. Output Voltage Stick: 230V/28.0-Volt, 115V/25.2-Volt. % at 200 Amp. Cooling Method: Forced Air / Fan Cooling. TIG-Arc Start Method: High Frequency & High Voltage. Power Factor: 0.85. Dimension: 15.72 x 8.52 x 12.85 in. Net Weight: 25.0 lbs. Packaging Size: 20.0 x 12.6 x 14.8 in. Packaging Weight: 35.0 lbs. TIG-205 TIG & Stick Welding Machine. 13 Feet 200A Professional TIG Torch Gun. 300A Electrode Holder, 10 Feet Cable, 35-50mm Lead Dines. 300A Work Clamp, 10 Feet Cable, 35-50mm Lead Dines.
Amico TIG-205, 205-Amp HF-TIG Arc Stick Welder, 100250V Wide Voltage Welding

Amico ST-205, 205-Amp Stick Arc Lift-TIG DC Welder, 100-250V, 60% Duty Cycle

Posted on November 3, 2023 by admin

ST-205 is a rectifier adopting the most advanced inverter technology. When stick and work piece get short, its response will be quicker. 300A Work Clamp, 10-feet Cable, 35-50mm Lead Dines. Rated Duty Cycle(230V): 205A at 60% & 160A at 100%.
Amico ST-205, 205-Amp Stick Arc Lift-TIG DC Welder, 100-250V, 60% Duty Cycle

Amico MTS-205, 205-Amp MIG TIG Stick Arc 3-in-1 Combo Welder, 60% Duty Cycle

Posted on August 27, 2023 by admin

MTS-205 is a multi-functional electric welding machine with a sleek and elegant appearance with superb production technology. It adopts the most advanced IGBT inverter technology, resulting in excellent arc stability and flawless welding effects. All metals can be welded: stainless steel, carbon steel, low carbon steel, steel, alloy, iron, copper, cast iron, and even aluminum using spool gun. Integrates the most innovative design structure and technology and includes all functions of every welding machine: MIG, MAG, Flux-Core, Lift-TIG, Stick, and Spool Gun welding. It can perfectly weld all conductive metals: aluminum, aluminum alloy, stainless steel, alloy steel, carbon steel, steel, cast iron, iron, and copper – all up to about 1/2 inch. This is the most efficient machine for all tasks, including industrial manufacturing, car modifications, and professional maintenance. MIG: Designed and manufactured according to the highest standard of industrial welding machines; 10 pound (8 inches) and 2 pound (4 inches) spools can be used. The high-performance drive wire feeder is manufactured with the highest technology, allowing the wire feeding speed to be stable and efficient. When using MIG/MAG/Flux-Core welding, adjusting the welding current and wire feeding speed is very simple, easy, and direct. STICK: With professional manufacturing and strong penetration, it is compatible with all electrodes: E6010, E6011, E6013, E7014, E7018, etc. With a thrust adjustment function, a built-in hot start function, an electrode anti-stick function, and current intensity control function, it can complete all work and tasks efficiently and easily. It is a reliable and effective tool for professional welders and a dream machine for beginners. LIFT-TIG: It can weld thin stainless steel and various other metals efficiently and safely and without high-frequency interference. The automatic temperature control function makes the machine run very quietly. The package includes: 13-feet MIG torch. 10-feet 300-amp electrode holder, 10-feet 300-amp ground clamp, and 115/230V power adapter. Intelligent power supply system can automatically detect the input voltage and can easily switch between 115V and 230V. Extending the power cord by 700 feet can also resist power fluctuations and cable attenuation, allowing it to still function efficiently. It is very suitable for difficult operations on construction sites, house maintenance, docks, agricultural sites, and even remote areas. Welder Type: 3-IN-1 MIG/TIG/STICK Combo Welder. Output Terminal Type: Direct Wire. Power Supply: AC 100V-250V/Single Phase/50-60Hz. 115V: 35.0A(MIG)/21.5A(TIG)/35.7A(STICK). 230V: 27.0A(MIG)/15.5A(TIG)/24.8A(STICK). 115V: 45.2A(MIG)/27.7A(TIG)/46.0A(STICK). 230V: 34.8A(MIG)/20.0A(TIG)/32.0A(STICK). Nominal DC Open Circuit Voltage (OCV): 56V. Welding Output, 104F(40C), 10 min(230V). MIG: 205A/24.2V, TIG: 170A/16.8V, STICK: 170A/26.8V. MIG: 60% at 205A, 100% at 158A. TIG: 60% at 170A, 100% at 132A. STICK: 60% at 170A 100% at 132A. Power factor: 0.85. Cooling Method: Fan Cooled. Product Size: 13.4 x 9.1 x 17.3 in. Product Weight: 27.0 lbs. Package Size: 24.2 x 14.2 x 18.1 in. Package Weight: 50.0 lbs. Feet 200A professional MIG torch assembly. Feet 200A professional TIG torch assembly. Feet 300A electrode holder. Feet 300A work clamp.
Amico MTS-205, 205-Amp MIG TIG Stick Arc 3-in-1 Combo Welder, 60% Duty Cycle

Amico TIG-205, 205-Amp HF-TIG Arc Stick Welder, 100250V Wide Voltage Welding

Posted on February 26, 2023 by admin

Is a rectifier incorporating the most advanced inverter technology. The welding power source can offer stronger, more concentrated, and more stable arc. TIG-205 can weld Steel, Stainless steel, Alloy steel, Mild steel, Nickel alloys, Copper, Brass, Bronze. The machine also works efficiently with generators. Power cords can properly function extended up to 700 feet. Is a professional welding machine with industrial level. Performance is remarkable, Very solid structure and professional configuration. HF Start-easy arc starting and improvers tungsten life, the HF service guarantees a start-up at 100%. 80% duty cycle at 200 amps, ensures long time welding, Very suitable for welding of various materials and projects. Advanced IGBT inverter technology, excellent Arc stability, 10-200 amps very suitable weld thin work-piece and thick work-piece. 100250V wide voltage, 50/60Hz. Almost all of the voltage and frequency can be used. Automatic compensation for voltage fluctuation, over-voltage protection, under-voltage protection, over-current protection, over-loads protection. Steeples amperage control, all generators friendly. Power cords extend to 700 feet still can use normally. The lightness and strength of its components make this a reliable work tool for professionals or personal use. Processes: TIG (GTAW), Stick, Arc. Rated Input Power: 230V/6.6KVA/40A, 115V/3.85KVA/47A. TIG Current Range: 230V/18.0V/10-200A, 115V/15.8V/10-130A. Stick Current Range: 230V/28.0V/20-200A, 115V/25.8V/20-130A. DC Open Circuit Voltage: 62-Volt. Output Voltage TIG: 230V/18.0-Volt, 115V/15.2-Volt. Output Voltage Stick: 230V/28.0-Volt, 115V/25.2-Volt. % at 200 Amp. Cooling Method: Forced Air / Fan Cooling. TIG-Arc Start Method: High Frequency & High Voltage. Power Factor: 0.93. Dimension: 15.72 x 8.52 x 12.85 in. Net Weight: 22.0 lbs. Packaging Size: 20.0 x 12.6 x 14.8 in. Packaging Weight: 30.0 lbs. TIG-205 TIG & Stick Welding Machine. 13 Feet 200A Professional TIG Torch Gun. 300A Electrode Holder, 10 Feet Cable, 35-50mm Lead Dines. 300A Work Clamp, 10 Feet Cable, 35-50mm Lead Dines. 7Feet Power Cord, N6-50P Plug. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Welding & Soldering Equipment\Welding Equipment & Accessories\Welders, Cutters & Torches\TIG Welders”. The seller is “deana11825″ and is located in this country: US. This item can be shipped to United States.

Brand: AMICO Power
Welded Material: Stainless Steel
Power Source: AC 100-250V, 50/60Hz
Welding Process: TIG
High Frequency TIG: 205 Amps
Model: TIG-205
Polarity: DC
Duty Cycle: 60% @ 205 Amp
Stick Welding: 205 Amps
MPN: TIG2052022
Item Type: Inverter
Welder Industrial Class: Light
UPC: 691027672792

Amico TIG-205HF, 205-Amp HF-TIG Arc Stick Welder, 100250V Wide Voltage Welding

Posted on February 13, 2023 by admin

Is a rectifier incorporating the most advanced inverter technology. The welding power source can offer stronger, more concentrated, and more stable arc. TIG-205HF can weld Steel, Stainless steel, Alloy steel, Mild steel, Nickel alloys, Copper, Brass, Bronze. The machine also works efficiently with generators. Power cords can properly function extended up to 700 feet. Is a professional welding machine with industrial level. Performance is remarkable, Very solid structure and professional configuration. HF Start-easy arc starting and improvers tungsten life, the HF service guarantees a start-up at 100%. 80% duty cycle at 200 amps, ensures long time welding, Very suitable for welding of various materials and projects. Advanced MOS inverter technology, excellent Arc stability, 10-200 amps very suitable weld thin work-piece and thick work-piece. 95260V wide voltage, 50/60Hz. Almost all of the voltage and frequency can be used. Automatic compensation for voltage fluctuation, over-voltage protection, under-voltage protection, over-current protection, over-loads protection. Steeples amperage control, all generators friendly. Power cords extend to 700 feet still can use normally. The lightness and strength of its components make this a reliable work tool for professionals or personal use. Processes: TIG (GTAW), Stick, Arc. Rated Input Power: 230V/6.6KVA/40A, 115V/3.85KVA/47A. TIG Current Range: 230V/18.0V/10-200A, 115V/15.8V/10-130A. Stick Current Range: 230V/28.0V/20-200A, 115V/25.8V/20-130A. DC Open Circuit Voltage: 62-Volt. Output Voltage TIG: 230V/18.0-Volt, 115V/15.2-Volt. Output Voltage Stick: 230V/28.0-Volt, 115V/25.2-Volt. % at 200 Amp. Cooling Method: Forced Air / Fan Cooling. TIG-Arc Start Method: High Frequency & High Voltage. Power Factor: 0.93. Dimension: 15.72 x 8.52 x 12.85 in. Net Weight: 25.0 lbs. Packaging Size: 20.0 x 12.6 x 14.8 in. Packaging Weight: 35.0 lbs. TIG-205HF TIG & Stick Welding Machine. 13 Feet 250A Professional TIG Torch Gun. 300A Electrode Holder, 10 Feet Cable, 35-50mm Lead Dines. 300A Work Clamp, 10 Feet Cable, 35-50mm Lead Dines. 8 Feet Power Cord, N6-50P Plug. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Welding & Soldering Equipment\Welding Equipment & Accessories\Welders, Cutters & Torches\TIG Welders”. The seller is “deana11825″ and is located in this country: US. This item can be shipped to United States.

Brand: AMICO Power
Welded Material: Stainless Steel
Power Source: AC 100-250V, 50/60Hz
Welding Process: TIG
High Frequency TIG: 205 Amps
Model: TIG-205HF
Polarity: DC
Duty Cycle: 80% @ 205 Amp
Stick Welding: 205 Amps
MPN: TIG205HF2022
Item Type: Inverter
Welder Industrial Class: Light
UPC: 0643307962581

Amico TIG-205, 205-Amp HF-TIG Arc Stick Welder, 100250V Wide Voltage Welding

Posted on August 24, 2022 by admin

Amico TIG-205 can weld Steel, Stainless steel, Alloy steel, Mild steel, Nickel alloys, Copper, Brass, Bronze. TIG-205 is ideal for high frequency TIG torch with Stick/Arc welder. HF Start-easy arc starting and improvers tungsten life, the HF service guarantees a start-up at 100%. Advanced IGBT inverter technology. 5-200 amps very suitable weld thin workpiece and thick workpiece. The lightness and strength of its components make this a reliable work tool for professionals or personal use. Automatic compensation for voltage fluctuation, over-voltage protection, under voltage protection, over current protection, over load protection. Fan automatic temperature control, Intelligent fan control operates when welding commences to cool components and reduce airborne contaminants pulled through the power source. This is optimized to deliver a flawless weld, making spatter and post-weld cleanup almost non-existent. Steeples amperage control, all generators friendly. 115V/230V Dual Voltage Input. TIG-205 is a rectifier adopting the most advanced inverter technology. Welding power source can offer stronger, more concentrated and more stable arc. When stick and work piece get short, its response will be quicker. It means that it is easier to design into welding machine with different dynamic characteristics, and it even can be adjusted for specialty to make arc softer or harder. Processes: TIG (GTAW), Stick, Arc. Rated Input Power: 230V/7.5KVA/33A & 115V/4.6KVA/40A. TIG Current Range: 230V/DC 18.0V/15-200A & 115V/DC 15.8V/15-145A. Stick Current Range: 230V/DC 18.0V/15-180A & 115V/DC 15.8V/15-130A. % at 200 Amps. Cooling Method: Forced Air / Fan Cooling. TIG-Arc Start Method: High Frequency & High Voltage. 1/16″ – 3/16″ & 115V/1/16″ – 5/32″. Power Factor: 0.93. Dimension: 16 x 6.5 x12 in. Net Weight: 16 lbs. Packaging Size: 19 x 10.2 x 13.6 in. Packaging Weight: 27 lbs. TIG-205: TIG & Stick 2-IN-1 Welder. 13 Feet Professional TIG Torch Gun. 10 Feet Electrode Holder and Cable. 10 Feet Work Clamp and Cable. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Welding & Soldering Equipment\Welding Equipment & Accessories\Welders, Cutters & Torches\TIG Welders”. The seller is “deana11825″ and is located in this country: US. This item can be shipped to United States.

Item Type: Inverter Welder
Welding Process: TIG
Polarity: DC
High Frequency TIG: 205 Amps
Model: TIG-205
Power Source: AC 100-250V, 50/60Hz
Duty Cycle: 60% @ 205 Amp
Stick Welding: 205 Amps
Welded Material: Stainless Steel
MPN: TOG2052022
Brand: AMICO Power
UPC: 691027670255

Amico MTS-205, 205-Amp Professional Welder, MIG MAG Lift-TIG Stick Arc Welding

Posted on November 19, 2021 by admin

Is the perfect choice for projects and repairs around the home and auto body shop. This welder can work well with solid wire and flux wire as well as aluminum wire. It also has the TIG and STICK function, can weld steel and stainless steel perfectly. The welder output range 10-205 amp. It uses standard flux-core wire(E71-gs) or steel wire 0.6-1.0mm, and aluminum wire. It has settings to easily adjust the output according to the thickness and changing the polarity according to the type of wires. MTS-205 multifunction 3-in-1 MIG/TIG/Stick Arc professional combo welder, capable of welding up to 1/2 aluminum, alloy, mild steel, weld steel, stainless steel, copper and cast Iron. It is the perfect choice for projects and repairs around the home and auto body shop. It can work well with aluminum wire, solid wire and flux cord wire, it also has the TIG Torch and STICK function, can weld steel and stainless steel perfectly. Advanced IGBT technology, featured wave-form control system, perfect waveform of volt and amp during, short circuits and arc burning cycles. Synergic controlled, very easy and simple operation. Very clear wire melting droplet transfer, very few spatters. Fast, precise, clean arc ignition and arc ending. 100-240 Voltage Inputs, means you can plug into any common power supply. Automatic compensation for voltage fluctuation, over-voltage protection, under voltage protection, over current protection, over load protection, automatic temperature control, fan dormancy, steeples amperage control. Using high quality wire feeding machine(iron) to ensure smooth wire feed, especially when using aluminum wire welding aluminum, with 2T/4T torch control. Automatic control gas solenoid valve has been installed inside the machine. All the accessories and interface using the US standards. Welder Type: 3-IN-1 MIG/TIG/STICK Combo Welder. Output Terminal Type: Direct Wire. Power Supply: AC 100V-240V/Single Phase/50-60Hz. 115V: 35.0A(MIG)/21.5A(TIG)/35.7A(STICK). 230V: 27.0A(MIG)/15.5A(TIG)/24.8A(STICK). 115V: 45.2A(MIG)/27.7A(TIG)/46.0A(STICK). 230V: 34.8A(MIG)/20.0A(TIG)/32.0A(STICK). Nominal DC Open Circuit Voltage (OCV): 56V. Welding Output, 104F(40C), 10 min(230V). MIG: 205A/24.2V, TIG: 170A/16.8V, STICK: 170A/26.8V. MIG: 60% at 205A, 100% at 158A. TIG: 60% at 170A, 100% at 132A. STICK: 60% at 170A 100% at 132A. Power factor: 0.85. Cooling Method: Fan Cooled. Product Size: 13.4 x 9.1 x 17.3 in. Product Weight: 27.0 lbs. Package Size: 24.2 x 14.2 x 18.1 in. Package Weight: 50.0 lbs. MIG gun and cable assembly. TIG Torch gun and cable assembly. 500A electrode holder and. 630A work clamp and. 120V/240V power plug adapter. 8 feet air hose use for Co2 and Argon connect. 1 spool 2 lbs. Aluminum wire use for MIG weld. Steel wire use for MIG weld. Use for TIG weld. 4 electrodes use for Stick/Arc Weld. 1 V-drive roll for 0.023 & 0.030 (0.6mm & 0.8mm). 1 U-drive roll for 0.030 & 0.035 (0.8mm & 0.9mm). 1 V-drive roll for 0.035 & 0.040 (0.9mm & 1.0mm). Quick manual & Owners Manual. The item “Amico MTS-205, 205-Amp Professional Welder, MIG MAG Lift-TIG Stick Arc Welding” is in sale since Saturday, January 9, 2021. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Welding & Soldering Equipment\Welding Equipment & Accessories\Welders, Cutters & Torches\TIG Welders”. The seller is “webseller2341″ and is located in Rowland Heights, California. This item can be shipped to United States.

Item Type: Inverter Welder
Welding Process: TIG
Polarity: DC
Model: MTS-205
Type: MIG (Flux Core), TIG, Stick ARC
Duty Cycle: 60% Duty Cycle @ 205A
Power Source: AC 115V & 230V Dual Voltage
Welded Material: Aluminum, Stainless Steel, Alloy Steel, Copper
MPN: MTS2052021
Brand: AMICO Power

Amico MTS-205, 205-Amp Welder, MIG/MAG/Lift-TIG/Stick Arc DC Inverter Welding

Posted on November 17, 2021 by admin

Is the perfect choice for projects and repairs around the home and auto body shop. This welder can work well with solid wire and flux wire as well as aluminum wire. It also has the TIG and STICK function, can weld steel and stainless steel perfectly. The welder output range 10-205 amp. It uses standard flux-core wire(E71-gs) or steel wire 0.6-1.0mm, and aluminum wire. It has settings to easily adjust the output according to the thickness and changing the polarity according to the type of wires. MTS-205 multifunction 3-in-1 MIG/TIG/Stick Arc professional combo welder, capable of welding up to 1/2 aluminum, alloy, mild steel, weld steel, stainless steel, copper and cast Iron. It is the perfect choice for projects and repairs around the home and auto body shop. It can work well with aluminum wire, solid wire and flux cord wire, it also has the TIG Torch and STICK function, can weld steel and stainless steel perfectly. Advanced IGBT technology, featured wave-form control system, perfect waveform of volt and amp during, short circuits and arc burning cycles. Synergic controlled, very easy and simple operation. Very clear wire melting droplet transfer, very few spatters. Fast, precise, clean arc ignition and arc ending. 100-240 Voltage Inputs, means you can plug into any common power supply. Automatic compensation for voltage fluctuation, over-voltage protection, under voltage protection, over current protection, over load protection, automatic temperature control, fan dormancy, steeples amperage control. Using high quality wire feeding machine(iron) to ensure smooth wire feed, especially when using aluminum wire welding aluminum, with 2T/4T torch control. Automatic control gas solenoid valve has been installed inside the machine. All the accessories and interface using the US standards. Welder Type: 3-IN-1 MIG/TIG/STICK Combo Welder. Output Terminal Type: Direct Wire. Power Supply: AC 100V-240V/Single Phase/50-60Hz. 115V: 35.0A(MIG)/21.5A(TIG)/35.7A(STICK). 230V: 27.0A(MIG)/15.5A(TIG)/24.8A(STICK). 115V: 45.2A(MIG)/27.7A(TIG)/46.0A(STICK). 230V: 34.8A(MIG)/20.0A(TIG)/32.0A(STICK). Nominal DC Open Circuit Voltage (OCV): 56V. Welding Output, 104F(40C), 10 min(230V). MIG: 205A/24.2V, TIG: 170A/16.8V, STICK: 170A/26.8V. MIG: 60% at 205A, 100% at 158A. TIG: 60% at 170A, 100% at 132A. STICK: 60% at 170A 100% at 132A. Power factor: 0.85. Cooling Method: Fan Cooled. Product Size: 13.4 x 9.1 x 17.3 in. Product Weight: 27.0 lbs. Package Size: 24.2 x 14.2 x 18.1 in. Package Weight: 50.0 lbs. MIG gun and cable assembly. TIG Torch gun and cable assembly. 500A electrode holder and. 630A work clamp and. 120V/240V power plug adapter. 8 feet air hose use for Co2 and Argon connect. 1 spool 2 lbs. Aluminum wire use for MIG weld. Steel wire use for MIG weld. Use for TIG weld. 4 electrodes use for Stick/Arc Weld. 1 V-drive roll for 0.023 & 0.030 (0.6mm & 0.8mm). 1 U-drive roll for 0.030 & 0.035 (0.8mm & 0.9mm). 1 V-drive roll for 0.035 & 0.040 (0.9mm & 1.0mm). Quick manual & Owners Manual. The item “Amico MTS-205, 205-Amp Welder, MIG/MAG/Lift-TIG/Stick Arc DC Inverter Welding” is in sale since Saturday, January 9, 2021. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Welding & Soldering Equipment\Welding Equipment & Accessories\Welders, Cutters & Torches\TIG Welders”. The seller is “webseller2341″ and is located in Rowland Heights, California. This item can be shipped to United States.

Item Type: Inverter Welder
Welding Process: TIG
Polarity: DC
Model: MTS-205
Type: MIG (Flux Core), TIG, Stick ARC
Duty Cycle: 60% Duty Cycle @ 205A
Power Source: AC 115V & 230V Dual Voltage
Welded Material: Aluminum, Stainless Steel, Alloy Steel, Copper
MPN: MTS2052021
Brand: AMICO Power

Amico MTS-205, 205-Amp MIG TIG Stick Arc 3-in-1 Combo Welder, 100-250V Welding

Posted on August 14, 2021 by admin

Is the perfect choice for projects and repairs around the home and auto body shop. This welder can work well with solid wire and flux wire as well as aluminum wire. It also has the TIG and STICK function, can weld steel and stainless steel perfectly. The welder output range 10-205 amp. It uses standard flux-core wire(E71-gs) or steel wire 0.6-1.0mm, and aluminum wire. It has settings to easily adjust the output according to the thickness and changing the polarity according to the type of wires. MTS-205 multifunction 3-in-1 MIG/TIG/Stick Arc professional combo welder, capable of welding up to 1/2 aluminum, alloy, mild steel, weld steel, stainless steel, copper and cast Iron. It is the perfect choice for projects and repairs around the home and auto body shop. It can work well with aluminum wire, solid wire and flux cord wire, it also has the TIG Torch and STICK function, can weld steel and stainless steel perfectly. Advanced IGBT technology, featured wave-form control system, perfect waveform of volt and amp during, short circuits and arc burning cycles. Synergic controlled, very easy and simple operation. Very clear wire melting droplet transfer, very few spatters. Fast, precise, clean arc ignition and arc ending. 100-240 Voltage Inputs, means you can plug into any common power supply. Automatic compensation for voltage fluctuation, over-voltage protection, under voltage protection, over current protection, over load protection, automatic temperature control, fan dormancy, steeples amperage control. Using high quality wire feeding machine(iron) to ensure smooth wire feed, especially when using aluminum wire welding aluminum, with 2T/4T torch control. Automatic control gas solenoid valve has been installed inside the machine. All the accessories and interface using the US standards. Welder Type: 3-IN-1 MIG/TIG/STICK Combo Welder. Output Terminal Type: Direct Wire. Power Supply: AC 100V-240V/Single Phase/50-60Hz. 115V: 35.0A(MIG)/21.5A(TIG)/35.7A(STICK). 230V: 27.0A(MIG)/15.5A(TIG)/24.8A(STICK). 115V: 45.2A(MIG)/27.7A(TIG)/46.0A(STICK). 230V: 34.8A(MIG)/20.0A(TIG)/32.0A(STICK). Nominal DC Open Circuit Voltage (OCV): 56V. Welding Output, 104F(40C), 10 min(230V). MIG: 205A/24.2V, TIG: 170A/16.8V, STICK: 170A/26.8V. MIG: 60% at 205A, 100% at 158A. TIG: 60% at 170A, 100% at 132A. STICK: 60% at 170A 100% at 132A. Power factor: 0.85. Cooling Method: Fan Cooled. Product Size: 13.4 x 9.1 x 17.3 in. Product Weight: 27.0 lbs. Package Size: 24.2 x 14.2 x 18.1 in. Package Weight: 50.0 lbs. MIG gun and cable assembly. TIG Torch gun and cable assembly. 500A electrode holder and. 630A work clamp and. 120V/240V power plug adapter. 8 feet air hose use for Co2 and Argon connect. 1 spool 2 lbs. Aluminum wire use for MIG weld. Steel wire use for MIG weld. Use for TIG weld. 4 electrodes use for Stick/Arc Weld. 1 V-drive roll for 0.023 & 0.030 (0.6mm & 0.8mm). 1 U-drive roll for 0.030 & 0.035 (0.8mm & 0.9mm). 1 V-drive roll for 0.035 & 0.040 (0.9mm & 1.0mm). Quick manual & Owners Manual. The item “Amico MTS-205, 205-Amp MIG TIG Stick Arc 3-in-1 Combo Welder, 100-250V Welding” is in sale since Saturday, January 9, 2021. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Welding & Soldering Equipment\Welding Equipment & Accessories\Welders, Cutters & Torches\TIG Welders”. The seller is “webseller2341″ and is located in Rowland Heights, California. This item can be shipped to United States.

Item Type: Inverter Welder
Welding Process: TIG
Polarity: DC
Model: MTS-205
Type: MIG (Flux Core), TIG, Stick ARC
Duty Cycle: 60% Duty Cycle @ 205A
Power Source: AC 115V & 230V Dual Voltage
Welded Material: Aluminum, Stainless Steel, Alloy Steel, Copper
MPN: MTS2052018
Brand: AMICO Power

Amico TIG-205HF, 205-Amp HF-TIG Arc Stick Combo Welder, 100-250V/80% Duty Cycle

Posted on May 25, 2021 by admin

TIG-205HF integrates advanced MOSFET inverter technology, allowing excellent arc stability and the most beautiful welds. Whether the material is stainless steel, alloy steel, low carbon steel, copper, iron, pig iron, cast iron, etc. The welding effect is absolutely ideal; the machine can be swiftly operated and can efficiently finish any tasks from home repairs or professional use. The new lightweight model design gives the machine an elegant structure and makes the machine very easy to carry. TIG-205HF is a professional Argon arc welding machine with outstanding performance and a robust and elegant structure. This is an industrial level machine high-frequency and high-voltage arcs are easy to start and ensure 100% perfection. The current of 10-205 amperes is very suitable for welding all types of thicknesses regarding work-pieces. The outstanding 80% duty cycle can also ensure long-time welding. TIG-205HF is an intelligent power supply system built with a sleek and modern design. The automatic selection function can automatically detect the input voltage and will adjust to the suitable conditions on its own. Additionally, you can easily manually adjust it in the range of 95V to 260V for specific requests. This machine is designed for demanding industrial work and construction, including simple tasks and chores around the house. Extending the power cord by 700 feet can also resist power fluctuations and cable attenuation. At that extreme length, the machine can still work perfectly and flawlessly, ensuring that the work is efficiently completed. It is extremely suitable for difficult operations on construction sites, agricultural sites, relatively remote areas, and even suitable for simple tasks around the house or workshop. TIG-205HF has a variety of safety protection functions, such as automatic voltage fluctuation compensation, over-heating protection, over-current protection, over-load protection, TIG torch gun safety protection, solenoid valve gas control, etc. The fan has an automatic temperature control function, which can make the machine run very quietly. Processes: TIG (GTAW), Stick, Arc. Rated Input Power: 230V/6.6KVA/40A, 115V/3.85KVA/47A. TIG Current Range: 230V/18.0V/10-200A, 115V/15.8V/10-130A. Stick Current Range: 230V/28.0V/20-200A, 115V/25.8V/20-130A. DC Open Circuit Voltage: 62-Volt. Output Voltage TIG: 230V/18.0-Volt, 115V/15.2-Volt. Output Voltage Stick: 230V/28.0-Volt, 115V/25.2-Volt. % at 200 Amp. Cooling Method: Forced Air / Fan Cooling. TIG-Arc Start Method: High Frequency & High Voltage. Power Factor: 0.93. Dimension: 15.72 x 8.52 x 12.85 in. Net Weight: 25.0 lbs. Packaging Size: 20.0 x 12.6 x 14.8 in. Packaging Weight: 35.0 lbs. TIG-205HF TIG & Stick Welding Machine. 13 Feet 200A Professional TIG Torch Gun. 300A Electrode Holder, 10 Feet Cable, 35-50mm Lead Dines. 300A Work Clamp, 10 Feet Cable, 35-50mm Lead Dines. 7-Feet Power Cord, N6-50P Plug. The item “Amico TIG-205HF, 205-Amp HF-TIG Arc Stick Combo Welder, 100-250V/80% Duty Cycle” is in sale since Friday, May 21, 2021. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Welding & Soldering Equipment\Welding Equipment & Accessories\Welders, Cutters & Torches\TIG Welders”. The seller is “deana11825″ and is located in Baldwin Park, California. This item can be shipped to United States.

Item Type: Inverter Welder
Welding Process: TIG Arc Stick Combo Welder
Polarity: DC
Torch Start: High Frequency Start 100%
Power Source: AC 100-250V, 50/60Hz
Welded Material: Stainless Steel, Alloy Steel, Mild Steel, Copper
MPN: TIG205HF2021
Brand: AMICO Power

Arc Inverter Welder

205-amp

Amico TIG-205, 205-Amp HF-TIG Arc Stick Welder, 100250V Wide Voltage Welding

Amico ST-205, 205-Amp Stick Arc Lift-TIG DC Welder, 100-250V, 60% Duty Cycle

Amico MTS-205, 205-Amp MIG TIG Stick Arc 3-in-1 Combo Welder, 60% Duty Cycle

Amico TIG-205, 205-Amp HF-TIG Arc Stick Welder, 100250V Wide Voltage Welding

Amico TIG-205HF, 205-Amp HF-TIG Arc Stick Welder, 100250V Wide Voltage Welding

Amico TIG-205, 205-Amp HF-TIG Arc Stick Welder, 100250V Wide Voltage Welding

Amico MTS-205, 205-Amp Professional Welder, MIG MAG Lift-TIG Stick Arc Welding

Amico MTS-205, 205-Amp Welder, MIG/MAG/Lift-TIG/Stick Arc DC Inverter Welding

Amico MTS-205, 205-Amp MIG TIG Stick Arc 3-in-1 Combo Welder, 100-250V Welding

Amico TIG-205HF, 205-Amp HF-TIG Arc Stick Combo Welder, 100-250V/80% Duty Cycle

April 2024
M	T	W	T	F	S	S
« Mar
1	2	3	4	5	6	7
8	9	10	11	12	13	14
15	16	17	18	19	20	21
22	23	24	25	26	27	28
29	30