TIG Welder 220V TIG/Pulse/Stick/ARC 3 in 1 HF Digital Control Welding Machine

TIG Welder 220V TIG/Pulse/Stick/ARC 3 in 1 HF Digital Control Welding Machine
TIG Welder 220V TIG/Pulse/Stick/ARC 3 in 1 HF Digital Control Welding Machine
TIG Welder 220V TIG/Pulse/Stick/ARC 3 in 1 HF Digital Control Welding Machine
TIG Welder 220V TIG/Pulse/Stick/ARC 3 in 1 HF Digital Control Welding Machine
TIG Welder 220V TIG/Pulse/Stick/ARC 3 in 1 HF Digital Control Welding Machine
TIG Welder 220V TIG/Pulse/Stick/ARC 3 in 1 HF Digital Control Welding Machine
TIG Welder 220V TIG/Pulse/Stick/ARC 3 in 1 HF Digital Control Welding Machine
TIG Welder 220V TIG/Pulse/Stick/ARC 3 in 1 HF Digital Control Welding Machine

TIG Welder 220V TIG/Pulse/Stick/ARC 3 in 1 HF Digital Control Welding Machine
You may also like. TIG Welder 220V TIG/Pulse/Stick/ARC 3 in 1 HF Digital Control Welding Machine. Extra free gift a Argon regulator With CO2 Adaptor. Important functions & device information. TIG-200P – 200 A – Digital – 220 V – Pulse. TIG welding is easier than ever with the REBOOT TIG-200P digitally controlled welder. In addition to the precise setting of the welding parameters, you can easily save the values?? For repetitive tasks and always use them again exactly. The modern IGBT inverter allows you to easily switch between the TIG Pulse, TIG and ARC welding modes, allowing you to weld up to 200 A for most metals and in a wide range of conditions. Your ideal program for ideal welding results: all stored in the TIG welding machine REBOOT TIG-200P. Thanks to digital technology, the TIG200P welding machine provides you with 10 job programs that you can set and save yourself. As a result, you do not have to re-try your welding settings every time, can fall back on your experience, which is recorded digitally. Especially convenient is the setting of all parameters via the clear control panel. The intuitive menu navigation allows you to easily set the welding parameters. The Save button allows you to save and use your settings as a job program. REBOOT – TIG Welder 110/220V Pulse Tig Welding Machine. This video will open in a new window. 110/220V+-15% 50/60Hz / 1 (einphasig). TIG / 5-200 MMA /20-160. TIG /10–18V MMA / 20,8-26,4 V. TIG welding: – Welding up to 3/8 stainless steel, alloy steel, mild steel, copper, cast iron and chrome. 3 in 1 combined device – TIG Pulse / TIG and ARC welding up to 200A. IGBT Technology – Latest and Most Advanced Transistors Technology Offers Highest Power and Duty Cycle (ED) of 60% at Full Power! No transformer, no MOSFET, state-of-the-art IGBT! Lightweight & Compact Design – Ideal for welding anywhere. Inovative IGBT transistors save space and weight compared to the old MOSFET technology. High frequency ignition – llows non-contact ignition and ensures a much better welding result. Highest efficiency and performance – Single-phase AC power (220V) powers the device. Smart cooling & overheating protection – modern technology, built-in overheat protection and high-performance cooling allow you to get maximum performance. Device Features & Benefits. Extensive pulse function – TIG PULSE – Prevents the burning of materials and reduces deformation due to heat, particularly suitable for welding thin plates, the material of which may be heated only slightly. Adjustable parameters are: basic current, pulse duty, pulse frequency, long and short pulse. Advantages of pulse function. Welding current / Basic current – The two rotary knobs “welding current” and “basic current”, two different current intensities can be set for a welding operation between which the welding current always changes. Pulse frequency – The pulse frequency determines how often the current changed back and forth between the two set values within a fixed time interval. Long pulse – The weld becomes wider, the heat input is higher and the penetration is deeper. Short pulse – The weld pool is easier to control and the danger of welding a hole in the sheet is lower. Start/End Current – prevents voids (end craters) at the end of the weld. TIG (Tungsten-Inert-Gas) – Inert gas welding with inert / inactive gases such as e. Argon 4.6 (99.996%). The glowing, non-consumable tungsten electrode causes the workpiece to melt and allows the addition of the filler material that forms the weld. MMA / Stick electrode welding – is a universal welding process. No protective gas is needed and can therefore be used flexibly anywhere. We recommend welding with 7018 [1/8″ (0.32mm)] and 6018 [3/32″ (2.38mm)] electrodes. If finally we can not solve the problem, we will send you a new replacement. 1 x Power source TIG-2000P 1 x 4m WP-26 TIG welding torch 1 x 2.5m cable +Earth clamp 1 x 2.5m cable+ electrode holder Extra free gift 1 x Argon regulator With CO2 Adaptor. Due to the difference between different monitors, the picture may not reflect the actual color of the item. We guarantee the style is the same as shown in the pictures. Due to the different personal measuring techniques, there might be 1-3cm error of the physical. Item Processing Time: The processing time for a specific order varies with the product type and stock status. All our item offer 7 days return peroid, defective or non-defective. Return must include all original package and accesorries, item must in good condition. Full Digital Control System. Mart Design with full digital control , Constant voltage and synergic adjustment control. Ully implement the ISO9001:2008 quality management system. 100% Quality Control Test. Each Machine with 100% QC Test , Life Test and Welding Function Test. Over 10 years factory control system focus on the welding field. The item “TIG Welder 220V TIG/Pulse/Stick/ARC 3 in 1 HF Digital Control Welding Machine” is in sale since Sunday, November 10, 2019. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Welding & Soldering Equipment\Welding Equipment & Accessories\Welders, Cutters & Torches\TIG Welders”. The seller is “mirthtek” and is located in Coppell, Texas. This item can be shipped to United States.
  • Duty Cycle25: 100%
  • Model: TIG-200
  • Country/Region of Manufacture: China
  • Item Type: Inverter Welder
  • Welding Process: Pulsed TIG
  • Polarity: DC
  • Duty Cycle40: 60%
  • No-Load VoltageV: 56±2
  • Foreblow TimeS): 0–2S
  • Arcforce CurrentA): 5–70A
  • Start CurrentA): 5–150A/200A
  • Up-slopS): 0–15S
  • down slopS): 0–25S
  • Efficiency : 85%
  • Protect Class: IP21S
  • Insulation Class: F
  • Welder Industrial Class: Light
  • Welded Material: Steel
  • MPN: REBOOT-1006
  • Package Weight(KG): 12.2KG
  • Package Sizemm: 440*380*360
  • Input Voltage  V,Hz: 110V/220V
  • Power RatingKVA: 6.8
  • Welding CurrentA TIG: 220V/ 5-200    ,110V/ 5-150
  • Welding CurrentA MMA: 220V/20-160    ,  110V/20-120
  • Rated VoltageV TIG: 220V/10–18V   ,  110V/10-16.2V
  • Rated VoltageV MMA: 220V/20.8-26.4V    ,110V/20.8-24.8V
  • Brand: REBOOT

TIG Welder 220V TIG/Pulse/Stick/ARC 3 in 1 HF Digital Control Welding Machine