Mig welding machine Powermat. Thanks to its implementation will be used both in home workshops and households as well as in more professional applications, such as field work and all kinds of repair work inside buildings. The Powermat migomat is a device with a wide range of applications, designed as an inverter power source enabling welding of. Gas with a hot melt. Bypass electrode welding , and. The electronics of the device is based on IGBT transistors combining the advantages of two types of transistors, the ease of control of field effect transistors and high breakdown voltage and the switching speed of bipolar transistors. The welding current is very stable, which guarantees a perfect weld. Thanks to IGBT technology, the device is light and compact. The welding parameters are adjusted steplessly (smoothly), the. Maximum welding current depends on the thickness of the wire / electrode used. The welding voltage, as well as the wire feeding speed in the case of the. MIG / MAG / FCAW. The two-roll feeder works with a 0.6 / 0.8 / 1.0mm wire. The high efficiency of the welding machine allows welding with. (for MIG / MAG / FCAW), and 180A for (TIG / MMA). In 60% duty cycle. The thermal switch will switch the device off if the permissible duty cycle for the given welding current is exceeded, thus preventing the welder from overheating. The current parameters of the device during welding are displayed on two, very legible displays that facilitate the selection of optimal work parameters. Convenient and very readable manipulators allow you to change welding parameters even with gloves attached. Power supply: 230V / 50Hz. Power consumption MIG / MAG: 6.1kVA. TIG / MMA power consumption: 5.8kVA. Welding methods: MIG / MAG / FCAW / MMA / TIG. MIG / MAG welding current range: 40 – 230A. TIG / MMA welding current range: 20 – 180A. Welding current duty cycle 100%: (MIG / MAG – 180A). Welding current 100% duty cycle: (TIG / MMA – 143A). Welding current 60% duty cycle: (MIG / MAG – 230A). Welding current 60% duty cycle: (TIG / MMA – 180A). Supported wire diameters: 0.6 / 0.8 / 1.0mm. Supported electrode diameters: 2.5mm – 4mm. Supported wire reels: up to 5kg. Wire feed: 2 – roller (internal). Degree of protection: IP21S. Dimensions: 51 x 22 x 38 cm [length / width / height]. Net weight: 12.5kg. Earth clamp with wire (-): – 1.9 m. MMA electrode with wire (+): – 2m. EURO MIG / MAG torch: 4m. Packing and shopping process. Simply leaving negative or neutral feedback can’t solve the problem. We can provide also the invoices without VAT, if you have active European VAT number. We are Polish wholesale of welding, pneumatic and technical products all over the world. Our company data: PEMAT S. Przyjazni 48b/11 41-103, Siemianowice Slaskie, Poland VAT UE: PL6431768329. The item “MIG MAG FCAW ARC inverter inverted welder 230A MIG / MAG / TIG / MMA PM-IMG-230T” is in sale since Tuesday, October 30, 2018. This item is in the category “Firma i Przemys\Obróbka metali i lusarstwo\Spawanie i lutowanie\Spawanie\Spawarki i palniki\Spawarki MIG/MAG”. The seller is “pematshop” and is located in Siemianowice Slaskie. This item can be shipped worldwide.
- Marka: Powermat
- Typ jednostki: Jednostka
- Cechy szczególne: Gaz osonowy
- MPN: PM-IMG-230T
- Liczba jednostek: 1